[PATCH v2 2/5] media: mt9p031: Read back the real clock rate

[Stefan Riedmueller]

From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>

The real and requested clock can differ and because it is used to
calculate PLL values, the real clock rate should be read.

Signed-off-by: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
---
No changes in v2
---
 drivers/media/i2c/mt9p031.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 2e6671ef877c..b4c042f418c1 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -255,6 +255,7 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
 
 	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
 	struct mt9p031_platform_data *pdata = mt9p031->pdata;
+	unsigned long ext_freq;
 	int ret;
 
 	mt9p031->clk = devm_clk_get(&client->dev, NULL);
@@ -265,13 +266,15 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
 	if (ret < 0)
 		return ret;
 
+	ext_freq = clk_get_rate(mt9p031->clk);
+
 	/* If the external clock frequency is out of bounds for the PLL use the
 	 * pixel clock divider only and disable the PLL.
 	 */
-	if (pdata->ext_freq > limits.ext_clock_max) {
+	if (ext_freq > limits.ext_clock_max) {
 		unsigned int div;
 
-		div = DIV_ROUND_UP(pdata->ext_freq, pdata->target_freq);
+		div = DIV_ROUND_UP(ext_freq, pdata->target_freq);
 		div = roundup_pow_of_two(div) / 2;
 
 		mt9p031->clk_div = min_t(unsigned int, div, 64);
@@ -280,7 +283,7 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
 		return 0;
 	}
 
-	mt9p031->pll.ext_clock = pdata->ext_freq;
+	mt9p031->pll.ext_clock = ext_freq;
 	mt9p031->pll.pix_clock = pdata->target_freq;
 	mt9p031->use_pll = true;
 
-- 
2.25.1