Re: [PATCH v2 4/5] PCI: qcom: Add SM8250 SoC support

[Stanimir Varbanov]

Hi Mani,

On 9/30/20 6:09 PM, Manivannan Sadhasivam wrote:
> The PCIe IP on SM8250 SoC is similar to the one used on SDM845. Hence
> the support is added reusing the members of ops_2_7_0. The key
> difference between ops_2_7_0 and ops_sm8250 is the config_sid callback,
> which will be added in successive commit.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 3aac77a295ba..44db91861b47 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1359,6 +1359,16 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
>  	.post_deinit = qcom_pcie_post_deinit_2_7_0,
>  };
>  
> +/* Qcom IP rev.: 1.9.0 */
> +static const struct qcom_pcie_ops ops_sm8250 = {

This breaks the policy compatible -> ops_X_Y_Z. Could you introduce new
method config_sid and check into for compatible qcom,pcie-sm8250 string
there?

> +	.get_resources = qcom_pcie_get_resources_2_7_0,
> +	.init = qcom_pcie_init_2_7_0,
> +	.deinit = qcom_pcie_deinit_2_7_0,
> +	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +	.post_init = qcom_pcie_post_init_2_7_0,
> +	.post_deinit = qcom_pcie_post_deinit_2_7_0,
> +};
> +
>  static const struct dw_pcie_ops dw_pcie_ops = {
>  	.link_up = qcom_pcie_link_up,
>  };
> @@ -1476,6 +1486,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 },
>  	{ .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 },
>  	{ .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 },
> +	{ .compatible = "qcom,pcie-sm8250", .data = &ops_sm8250 },
>  	{ }
>  };
>  
> 

-- 
regards,
Stan