[PATCH v5 10/15] misc: bcm-vk: reset_pid support
From: Scott Branden
Date: Wed Sep 30 2020 - 21:29:17 EST
Add reset support via ioctl.
Kill user processes that are open when VK card is reset.
If a particular PID has issued the reset request do not kill that process
as it issued the ioctl.
Co-developed-by: Desmond Yan <desmond.yan@xxxxxxxxxxxx>
Signed-off-by: Desmond Yan <desmond.yan@xxxxxxxxxxxx>
Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
drivers/misc/bcm-vk/bcm_vk.h | 1 +
drivers/misc/bcm-vk/bcm_vk_dev.c | 158 +++++++++++++++++++++++++++++--
drivers/misc/bcm-vk/bcm_vk_msg.c | 40 +++++++-
3 files changed, 191 insertions(+), 8 deletions(-)
diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h
index 38b2bd575b97..92251a56516f 100644
--- a/drivers/misc/bcm-vk/bcm_vk.h
+++ b/drivers/misc/bcm-vk/bcm_vk.h
@@ -463,6 +463,7 @@ irqreturn_t bcm_vk_msgq_irqhandler(int irq, void *dev_id);
irqreturn_t bcm_vk_notf_irqhandler(int irq, void *dev_id);
int bcm_vk_msg_init(struct bcm_vk *vk);
void bcm_vk_msg_remove(struct bcm_vk *vk);
+void bcm_vk_drain_msg_on_reset(struct bcm_vk *vk);
int bcm_vk_sync_msgq(struct bcm_vk *vk, bool force_sync);
void bcm_vk_blk_drv_access(struct bcm_vk *vk);
s32 bcm_to_h_msg_dequeue(struct bcm_vk *vk);
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index c23bfaa71a31..7fdf245b0436 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -478,7 +478,9 @@ void bcm_vk_blk_drv_access(struct bcm_vk *vk)
int i;
/*
- * kill all the apps
+ * kill all the apps except for the process that is resetting.
+ * If not called during reset, reset_pid will be 0, and all will be
+ * killed.
*/
spin_lock(&vk->ctx_lock);
@@ -489,10 +491,12 @@ void bcm_vk_blk_drv_access(struct bcm_vk *vk)
struct bcm_vk_ctx *ctx;
list_for_each_entry(ctx, &vk->pid_ht[i].head, node) {
- dev_dbg(&vk->pdev->dev,
- "Send kill signal to pid %d\n",
- ctx->pid);
- kill_pid(find_vpid(ctx->pid), SIGKILL, 1);
+ if (ctx->pid != vk->reset_pid) {
+ dev_dbg(&vk->pdev->dev,
+ "Send kill signal to pid %d\n",
+ ctx->pid);
+ kill_pid(find_vpid(ctx->pid), SIGKILL, 1);
+ }
}
}
spin_unlock(&vk->ctx_lock);
@@ -975,6 +979,49 @@ static long bcm_vk_load_image(struct bcm_vk *vk,
return ret;
}
+static int bcm_vk_reset_successful(struct bcm_vk *vk)
+{
+ struct device *dev = &vk->pdev->dev;
+ u32 fw_status, reset_reason;
+ int ret = -EAGAIN;
+
+ /*
+ * Reset could be triggered when the card in several state:
+ * i) in bootROM
+ * ii) after boot1
+ * iii) boot2 running
+ *
+ * i) & ii) - no status bits will be updated. If vkboot1
+ * runs automatically after reset, it will update the reason
+ * to be unknown reason
+ * iii) - reboot reason match + deinit done.
+ */
+ fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
+ /* immediate exit if interface goes down */
+ if (BCM_VK_INTF_IS_DOWN(fw_status)) {
+ dev_err(dev, "PCIe Intf Down!\n");
+ goto reset_exit;
+ }
+
+ reset_reason = (fw_status & VK_FWSTS_RESET_REASON_MASK);
+ if ((reset_reason == VK_FWSTS_RESET_MBOX_DB) ||
+ (reset_reason == VK_FWSTS_RESET_UNKNOWN))
+ ret = 0;
+
+ /*
+ * if some of the deinit bits are set, but done
+ * bit is not, this is a failure if triggered while boot2 is running
+ */
+ if ((fw_status & VK_FWSTS_DEINIT_TRIGGERED) &&
+ !(fw_status & VK_FWSTS_RESET_DONE))
+ ret = -EAGAIN;
+
+reset_exit:
+ dev_dbg(dev, "FW status = 0x%x ret %d\n", fw_status, ret);
+
+ return ret;
+}
+
static void bcm_to_v_reset_doorbell(struct bcm_vk *vk, u32 db_val)
{
vkwrite32(vk, db_val, BAR_0, VK_BAR0_RESET_DB_BASE);
@@ -984,7 +1031,11 @@ static int bcm_vk_trigger_reset(struct bcm_vk *vk)
{
u32 i;
u32 value, boot_status;
+ bool is_stdalone, is_boot2;
+ /* clean up before pressing the door bell */
+ bcm_vk_drain_msg_on_reset(vk);
+ vkwrite32(vk, 0, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
/* make tag '\0' terminated */
vkwrite32(vk, 0, BAR_1, VK_BAR1_BOOT1_VER_TAG);
@@ -995,6 +1046,11 @@ static int bcm_vk_trigger_reset(struct bcm_vk *vk)
for (i = 0; i < VK_BAR1_SOTP_REVID_MAX; i++)
vkwrite32(vk, 0, BAR_1, VK_BAR1_SOTP_REVID_ADDR(i));
+ memset(&vk->card_info, 0, sizeof(vk->card_info));
+ memset(&vk->peerlog_info, 0, sizeof(vk->peerlog_info));
+ memset(&vk->proc_mon_info, 0, sizeof(vk->proc_mon_info));
+ memset(&vk->alert_cnts, 0, sizeof(vk->alert_cnts));
+
/*
* When boot request fails, the CODE_PUSH_OFFSET stays persistent.
* Allowing us to debug the failure. When we call reset,
@@ -1015,17 +1071,103 @@ static int bcm_vk_trigger_reset(struct bcm_vk *vk)
}
vkwrite32(vk, value, BAR_0, BAR_CODEPUSH_SBL);
+ /* special reset handling */
+ is_stdalone = boot_status & BOOT_STDALONE_RUNNING;
+ is_boot2 = (boot_status & BOOT_STATE_MASK) == BOOT2_RUNNING;
+ if (vk->peer_alert.flags & ERR_LOG_RAMDUMP) {
+ /*
+ * if card is in ramdump mode, it is hitting an error. Don't
+ * reset the reboot reason as it will contain valid info that
+ * is important - simply use special reset
+ */
+ vkwrite32(vk, VK_BAR0_RESET_RAMPDUMP, BAR_0, VK_BAR_FWSTS);
+ return VK_BAR0_RESET_RAMPDUMP;
+ } else if (is_stdalone && !is_boot2) {
+ dev_info(&vk->pdev->dev, "Hard reset on Standalone mode");
+ bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_HARD);
+ return VK_BAR0_RESET_DB_HARD;
+ }
+
/* reset fw_status with proper reason, and press db */
vkwrite32(vk, VK_FWSTS_RESET_MBOX_DB, BAR_0, VK_BAR_FWSTS);
bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_SOFT);
- /* clear other necessary registers records */
+ /* clear other necessary registers and alert records */
vkwrite32(vk, 0, BAR_0, BAR_OS_UPTIME);
vkwrite32(vk, 0, BAR_0, BAR_INTF_VER);
+ memset(&vk->host_alert, 0, sizeof(vk->host_alert));
+ memset(&vk->peer_alert, 0, sizeof(vk->peer_alert));
+ /* clear 4096 bits of bitmap */
+ bitmap_clear(vk->bmap, 0, VK_MSG_ID_BITMAP_SIZE);
return 0;
}
+static long bcm_vk_reset(struct bcm_vk *vk, struct vk_reset __user *arg)
+{
+ struct device *dev = &vk->pdev->dev;
+ struct vk_reset reset;
+ int ret = 0;
+ u32 ramdump_reset;
+ int special_reset;
+
+ if (copy_from_user(&reset, arg, sizeof(struct vk_reset)))
+ return -EFAULT;
+
+ /* check if any download is in-progress, if so return error */
+ if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0) {
+ dev_err(dev, "Download operation pending - skip reset.\n");
+ return -EPERM;
+ }
+
+ ramdump_reset = vk->peer_alert.flags & ERR_LOG_RAMDUMP;
+ dev_info(dev, "Issue Reset %s\n",
+ ramdump_reset ? "in ramdump mode" : "");
+
+ /*
+ * The following is the sequence of reset:
+ * - send card level graceful shut down
+ * - wait enough time for VK to handle its business, stopping DMA etc
+ * - kill host apps
+ * - Trigger interrupt with DB
+ */
+ bcm_vk_send_shutdown_msg(vk, VK_SHUTDOWN_GRACEFUL, 0, 0);
+
+ spin_lock(&vk->ctx_lock);
+ if (!vk->reset_pid) {
+ vk->reset_pid = task_pid_nr(current);
+ } else {
+ dev_err(dev, "Reset already launched by process pid %d\n",
+ vk->reset_pid);
+ ret = -EACCES;
+ }
+ spin_unlock(&vk->ctx_lock);
+ if (ret)
+ goto err_exit;
+
+ bcm_vk_blk_drv_access(vk);
+ special_reset = bcm_vk_trigger_reset(vk);
+
+ /*
+ * Wait enough time for card os to deinit
+ * and populate the reset reason.
+ */
+ msleep(BCM_VK_DEINIT_TIME_MS);
+
+ if (special_reset) {
+ /* if it is special ramdump reset, return the type to user */
+ reset.arg2 = special_reset;
+ if (copy_to_user(arg, &reset, sizeof(reset)))
+ ret = -EFAULT;
+ } else {
+ ret = bcm_vk_reset_successful(vk);
+ }
+
+err_exit:
+ clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
+ return ret;
+}
+
static long bcm_vk_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret = -EINVAL;
@@ -1044,6 +1186,10 @@ static long bcm_vk_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
ret = bcm_vk_load_image(vk, argp);
break;
+ case VK_IOCTL_RESET:
+ ret = bcm_vk_reset(vk, argp);
+ break;
+
default:
break;
}
diff --git a/drivers/misc/bcm-vk/bcm_vk_msg.c b/drivers/misc/bcm-vk/bcm_vk_msg.c
index 3f2876484b7a..e31d41400199 100644
--- a/drivers/misc/bcm-vk/bcm_vk_msg.c
+++ b/drivers/misc/bcm-vk/bcm_vk_msg.c
@@ -204,6 +204,15 @@ static struct bcm_vk_ctx *bcm_vk_get_ctx(struct bcm_vk *vk, const pid_t pid)
spin_lock(&vk->ctx_lock);
+ /* check if it is in reset, if so, don't allow */
+ if (vk->reset_pid) {
+ dev_err(&vk->pdev->dev,
+ "No context allowed during reset by pid %d\n",
+ vk->reset_pid);
+
+ goto in_reset_exit;
+ }
+
for (i = 0; i < ARRAY_SIZE(vk->ctx); i++) {
if (!vk->ctx[i].in_use) {
vk->ctx[i].in_use = true;
@@ -232,6 +241,7 @@ static struct bcm_vk_ctx *bcm_vk_get_ctx(struct bcm_vk *vk, const pid_t pid)
init_waitqueue_head(&ctx->rd_wq);
all_in_use_exit:
+in_reset_exit:
spin_unlock(&vk->ctx_lock);
return ctx;
@@ -376,6 +386,12 @@ static void bcm_vk_drain_all_pend(struct device *dev,
num, ctx->idx);
}
+void bcm_vk_drain_msg_on_reset(struct bcm_vk *vk)
+{
+ bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_v_msg_chan, NULL);
+ bcm_vk_drain_all_pend(&vk->pdev->dev, &vk->to_h_msg_chan, NULL);
+}
+
/*
* Function to sync up the messages queue info that is provided by BAR1
*/
@@ -700,13 +716,22 @@ static int bcm_vk_handle_last_sess(struct bcm_vk *vk, const pid_t pid,
/*
* don't send down or do anything if message queue is not initialized
+ * and if it is the reset session, clear it.
*/
- if (!bcm_vk_drv_access_ok(vk))
+ if (!bcm_vk_drv_access_ok(vk)) {
+ if (vk->reset_pid == pid)
+ vk->reset_pid = 0;
return -EPERM;
+ }
dev_dbg(dev, "No more sessions, shut down pid %d\n", pid);
- rc = bcm_vk_send_shutdown_msg(vk, VK_SHUTDOWN_PID, pid, q_num);
+ /* only need to do it if it is not the reset process */
+ if (vk->reset_pid != pid)
+ rc = bcm_vk_send_shutdown_msg(vk, VK_SHUTDOWN_PID, pid, q_num);
+ else
+ /* put reset_pid to 0 if it is exiting last session */
+ vk->reset_pid = 0;
return rc;
}
@@ -1110,6 +1135,17 @@ ssize_t bcm_vk_write(struct file *p_file,
int dir;
struct _vk_data *data;
+ /*
+ * check if we are in reset, if so, no buffer transfer is
+ * allowed and return error.
+ */
+ if (vk->reset_pid) {
+ dev_dbg(dev, "No Transfer allowed during reset, pid %d.\n",
+ ctx->pid);
+ rc = -EACCES;
+ goto write_free_msgid;
+ }
+
num_planes = entry->to_v_msg[0].cmd & VK_CMD_PLANES_MASK;
if ((entry->to_v_msg[0].cmd & VK_CMD_MASK) == VK_CMD_DOWNLOAD)
dir = DMA_FROM_DEVICE;
--
2.17.1