[PATCH net-next 1/4] net: dsa: Call dsa_untag_bridge_pvid() from dsa_switch_rcv()

[Florian Fainelli]

When a DSA switch driver needs to call dsa_untag_bridge_pvid(), it can
set dsa_switch::untag_brige_pvid to indicate this is necessary.

This is a pre-requisite to making sure that we are always calling
dsa_untag_bridge_pvid() after eth_type_trans() has been called.

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 include/net/dsa.h | 8 ++++++++
 net/dsa/dsa.c     | 9 +++++++++
 2 files changed, 17 insertions(+)

diff --git a/include/net/dsa.h b/include/net/dsa.h
index b502a63d196e..8b0696e08cac 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -308,6 +308,14 @@ struct dsa_switch {
 	 */
 	bool			configure_vlan_while_not_filtering;
 
+	/* If the switch driver always programs the CPU port as egress tagged
+	 * despite the VLAN configuration indicating otherwise, then setting
+	 * @untag_bridge_pvid will force the DSA receive path to pop the bridge's
+	 * default_pvid VLAN tagged frames to offer a consistent behavior
+	 * between a vlan_filtering=0 and vlan_filtering=1 bridge device.
+	 */
+	bool			untag_bridge_pvid;
+
 	/* In case vlan_filtering_is_global is set, the VLAN awareness state
 	 * should be retrieved from here and not from the per-port settings.
 	 */
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 5c18c0214aac..dec4ab59b7c4 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -225,6 +225,15 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
 	skb->pkt_type = PACKET_HOST;
 	skb->protocol = eth_type_trans(skb, skb->dev);
 
+	if (unlikely(cpu_dp->ds->untag_bridge_pvid)) {
+		nskb = dsa_untag_bridge_pvid(skb);
+		if (!nskb) {
+			kfree_skb(skb);
+			return 0;
+		}
+		skb = nskb;
+	}
+
 	s = this_cpu_ptr(p->stats64);
 	u64_stats_update_begin(&s->syncp);
 	s->rx_packets++;
-- 
2.25.1