Re: [PATCH] usb: cdns3: platform_get_irq_byname_optional instead platform_get_irq_byname

[Roger Quadros]

Pawel,

On 30/09/2020 09:57, Pawel Laszczak wrote:
> To avoid duplicate error information patch replaces platform_get_irq_byname
> into platform_get_irq_byname_optional.

What is duplicate error information?

> A change was suggested during reviewing CDNSP driver by Chunfeng Yun.
>
> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
> ---
>   drivers/usb/cdns3/core.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> index a0f73d4711ae..a3f6dc44cf3a 100644
> --- a/drivers/usb/cdns3/core.c
> +++ b/drivers/usb/cdns3/core.c
> @@ -465,7 +465,7 @@ static int cdns3_probe(struct platform_device *pdev)
>   
>   	cdns->xhci_res[1] = *res;
>   
> -	cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral");
> +	cdns->dev_irq = platform_get_irq_byname_optional(pdev, "peripheral");

As per DT binding document, these are mandatory properties

 - interrupts: Interrupts used by cdns3 controller:
        "host" - interrupt used by XHCI driver.
        "peripheral" - interrupt used by device driver
        "otg" - interrupt used by DRD/OTG  part of driver

for dr_mode == "otg" -> all 3 are mandatory.
for dr_mode == "host" -> "otg" and "peripheral" IRQs are not required.
for dr_mode == "periphearal" -> "otg" and "host" IRQs are not required.

>   	if (cdns->dev_irq == -EPROBE_DEFER)
>   		return cdns->dev_irq;
>   
> @@ -477,7 +477,7 @@ static int cdns3_probe(struct platform_device *pdev)
>   		return PTR_ERR(regs);
>   	cdns->dev_regs	= regs;
>   
> -	cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
> +	cdns->otg_irq = platform_get_irq_byname_optional(pdev, "otg");
>   	if (cdns->otg_irq == -EPROBE_DEFER)
>   		return cdns->otg_irq;
>   

cheers,
-roger
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki