[PATCH v2 2/2] media: dt-bindings: media: i2c: Add bindings for ADDI9036

[Bogdan Togorean]

Add YAML device tree bindings for Analog Devices Inc. ADDI9036 CCD TOF
front-end.

Signed-off-by: Bogdan Togorean <bogdan.togorean@xxxxxxxxxx>
---
v2: added reg property description
---
 .../bindings/media/i2c/adi,addi9036.yaml      | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
new file mode 100644
index 000000000000..7c4af704db98
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adi,addi9036.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADDI9036 VGA CCD Time of Flight Sensor
+
+maintainers:
+  - Bogdan Togorean <bogdan.togorean@xxxxxxxxxx>
+
+description: |-
+  The ADDI9036 is a complete, 45 MHz, front-end solution for charge coupled
+  device (CCD) time of flight (TOF) imaging applications. It is programmable
+  through I2C interface. Image data is sent through MIPI CSI-2 2 lanes and
+  can output two RAW12 packed data streams. One is IR and the other is Depth.
+  Each data stream is on a separate or same MIPI Virtual Channel, depending
+  on configuration and each have 640x480 resolution.
+
+properties:
+  compatible:
+    const: adi,addi9036
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the RST/SYNC pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  # See ../video-interfaces.txt for more details
+  port:
+    type: object
+    properties:
+      endpoint:
+        type: object
+        properties:
+          data-lanes:
+            description: |-
+              The sensor supports two-lane operation.
+              For two-lane operation the property must be set to <1 2>.
+            items:
+              - const: 1
+              - const: 2
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        addi9036: addi9036_tof@64 {
+            compatible = "adi,addi9036";
+            reg = <0x64>;
+
+            reset-gpios = <&gpio 41 1>;
+
+            port {
+                addi9036_ep: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.28.0