[PATCH v6 03/14] misc: bcm-vk: add autoload support
From: Scott Branden
Date: Fri Oct 02 2020 - 17:24:17 EST
Add support to load and boot images on card automatically.
The kernel module parameter auto_load can be passed in as false to disable
such support on probe.
As well, nr_scratch_pages can be specified to allocate more or less scratch
memory on init as needed for desired card operation.
Co-developed-by: Desmond Yan <desmond.yan@xxxxxxxxxxxx>
Signed-off-by: Desmond Yan <desmond.yan@xxxxxxxxxxxx>
Co-developed-by: James Hu <james.hu@xxxxxxxxxxxx>
Signed-off-by: James Hu <james.hu@xxxxxxxxxxxx>
Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
drivers/misc/bcm-vk/bcm_vk.h | 250 +++++++++++
drivers/misc/bcm-vk/bcm_vk_dev.c | 718 +++++++++++++++++++++++++++++++
2 files changed, 968 insertions(+)
diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h
index 9152785199ab..c4fb61a84e41 100644
--- a/drivers/misc/bcm-vk/bcm_vk.h
+++ b/drivers/misc/bcm-vk/bcm_vk.h
@@ -6,10 +6,187 @@
#ifndef BCM_VK_H
#define BCM_VK_H
+#include <linux/firmware.h>
#include <linux/pci.h>
+#include <linux/sched/signal.h>
#define DRV_MODULE_NAME "bcm-vk"
+/*
+ * Load Image is completed in two stages:
+ *
+ * 1) When the VK device boot-up, M7 CPU runs and executes the BootROM.
+ * The Secure Boot Loader (SBL) as part of the BootROM will run
+ * to open up ITCM for host to push BOOT1 image.
+ * SBL will authenticate the image before jumping to BOOT1 image.
+ *
+ * 2) Because BOOT1 image is a secured image, we also called it the
+ * Secure Boot Image (SBI). At second stage, SBI will initialize DDR
+ * and wait for host to push BOOT2 image to DDR.
+ * SBI will authenticate the image before jumping to BOOT2 image.
+ *
+ */
+/* Location of registers of interest in BAR0 */
+
+/* Request register for Secure Boot Loader (SBL) download */
+#define BAR_CODEPUSH_SBL 0x400
+/* Start of ITCM */
+#define CODEPUSH_BOOT1_ENTRY 0x00400000
+#define CODEPUSH_MASK 0xfffff000
+#define CODEPUSH_BOOTSTART BIT(0)
+
+/* Boot Status register */
+#define BAR_BOOT_STATUS 0x404
+
+#define SRAM_OPEN BIT(16)
+#define DDR_OPEN BIT(17)
+
+/* Firmware loader progress status definitions */
+#define FW_LOADER_ACK_SEND_MORE_DATA BIT(18)
+#define FW_LOADER_ACK_IN_PROGRESS BIT(19)
+#define FW_LOADER_ACK_RCVD_ALL_DATA BIT(20)
+
+/* Boot1/2 is running in standalone mode */
+#define BOOT_STDALONE_RUNNING BIT(21)
+
+/* definitions for boot status register */
+#define BOOT_STATE_MASK (0xffffffff & \
+ ~(FW_LOADER_ACK_SEND_MORE_DATA | \
+ FW_LOADER_ACK_IN_PROGRESS | \
+ BOOT_STDALONE_RUNNING))
+
+#define BOOT_ERR_SHIFT 4
+#define BOOT_ERR_MASK (0xf << BOOT_ERR_SHIFT)
+#define BOOT_PROG_MASK 0xf
+
+#define BROM_STATUS_NOT_RUN 0x2
+#define BROM_NOT_RUN (SRAM_OPEN | BROM_STATUS_NOT_RUN)
+#define BROM_STATUS_COMPLETE 0x6
+#define BROM_RUNNING (SRAM_OPEN | BROM_STATUS_COMPLETE)
+#define BOOT1_STATUS_COMPLETE 0x6
+#define BOOT1_RUNNING (DDR_OPEN | BOOT1_STATUS_COMPLETE)
+#define BOOT2_STATUS_COMPLETE 0x6
+#define BOOT2_RUNNING (FW_LOADER_ACK_RCVD_ALL_DATA | \
+ BOOT2_STATUS_COMPLETE)
+
+/* Boot request for Secure Boot Image (SBI) */
+#define BAR_CODEPUSH_SBI 0x408
+/* 64M mapped to BAR2 */
+#define CODEPUSH_BOOT2_ENTRY 0x60000000
+
+#define BAR_CARD_STATUS 0x410
+
+#define BAR_BOOT1_STDALONE_PROGRESS 0x420
+#define BOOT1_STDALONE_SUCCESS (BIT(13) | BIT(14))
+#define BOOT1_STDALONE_PROGRESS_MASK BOOT1_STDALONE_SUCCESS
+
+#define BAR_METADATA_VERSION 0x440
+#define BAR_OS_UPTIME 0x444
+#define BAR_CHIP_ID 0x448
+#define MAJOR_SOC_REV(_chip_id) (((_chip_id) >> 20) & 0xf)
+
+#define BAR_CARD_TEMPERATURE 0x45c
+
+#define BAR_CARD_VOLTAGE 0x460
+
+#define BAR_CARD_ERR_LOG 0x464
+
+#define BAR_CARD_ERR_MEM 0x468
+
+#define BAR_CARD_PWR_AND_THRE 0x46c
+
+#define BAR_CARD_STATIC_INFO 0x470
+
+#define BAR_INTF_VER 0x47c
+#define BAR_INTF_VER_MAJOR_SHIFT 16
+#define BAR_INTF_VER_MASK 0xffff
+/*
+ * major and minor semantic version numbers supported
+ * Please update as required on interface changes
+ */
+#define SEMANTIC_MAJOR 1
+#define SEMANTIC_MINOR 0
+
+/*
+ * first door bell reg, ie for queue = 0. Only need the first one, as
+ * we will use the queue number to derive the others
+ */
+#define VK_BAR0_REGSEG_DB_BASE 0x484
+#define VK_BAR0_REGSEG_DB_REG_GAP 8 /*
+ * DB register gap,
+ * DB1 at 0x48c and DB2 at 0x494
+ */
+
+/* reset register and specific values */
+#define VK_BAR0_RESET_DB_NUM 3
+#define VK_BAR0_RESET_DB_SOFT 0xffffffff
+#define VK_BAR0_RESET_DB_HARD 0xfffffffd
+#define VK_BAR0_RESET_RAMPDUMP 0xa0000000
+
+#define VK_BAR0_Q_DB_BASE(q_num) (VK_BAR0_REGSEG_DB_BASE + \
+ ((q_num) * VK_BAR0_REGSEG_DB_REG_GAP))
+#define VK_BAR0_RESET_DB_BASE (VK_BAR0_REGSEG_DB_BASE + \
+ (VK_BAR0_RESET_DB_NUM * VK_BAR0_REGSEG_DB_REG_GAP))
+
+#define BAR_BOOTSRC_SELECT 0xc78
+/* BOOTSRC definitions */
+#define BOOTSRC_SOFT_ENABLE BIT(14)
+
+/* Card OS Firmware version size */
+#define BAR_FIRMWARE_TAG_SIZE 50
+#define FIRMWARE_STATUS_PRE_INIT_DONE 0x1f
+
+/*
+ * BAR1
+ */
+
+/* BAR1 message q definition */
+
+/* indicate if msgq ctrl in BAR1 is populated */
+#define VK_BAR1_MSGQ_DEF_RDY 0x60c0
+/* ready marker value for the above location, normal boot2 */
+#define VK_BAR1_MSGQ_RDY_MARKER 0xbeefcafe
+/* ready marker value for the above location, normal boot2 */
+#define VK_BAR1_DIAG_RDY_MARKER 0xdeadcafe
+/* number of msgqs in BAR1 */
+#define VK_BAR1_MSGQ_NR 0x60c4
+/* BAR1 queue control structure offset */
+#define VK_BAR1_MSGQ_CTRL_OFF 0x60c8
+
+/* BAR1 ucode and boot1 version tag */
+#define VK_BAR1_UCODE_VER_TAG 0x6170
+#define VK_BAR1_BOOT1_VER_TAG 0x61b0
+#define VK_BAR1_VER_TAG_SIZE 64
+
+/* Memory to hold the DMA buffer memory address allocated for boot2 download */
+#define VK_BAR1_DMA_BUF_OFF_HI 0x61e0
+#define VK_BAR1_DMA_BUF_OFF_LO (VK_BAR1_DMA_BUF_OFF_HI + 4)
+#define VK_BAR1_DMA_BUF_SZ (VK_BAR1_DMA_BUF_OFF_HI + 8)
+
+/* Scratch memory allocated on host for VK */
+#define VK_BAR1_SCRATCH_OFF_HI 0x61f0
+#define VK_BAR1_SCRATCH_OFF_LO (VK_BAR1_SCRATCH_OFF_HI + 4)
+#define VK_BAR1_SCRATCH_SZ_ADDR (VK_BAR1_SCRATCH_OFF_HI + 8)
+#define VK_BAR1_SCRATCH_DEF_NR_PAGES 32
+
+/* BAR1 DAUTH info */
+#define VK_BAR1_DAUTH_BASE_ADDR 0x6200
+#define VK_BAR1_DAUTH_STORE_SIZE 0x48
+#define VK_BAR1_DAUTH_VALID_SIZE 0x8
+#define VK_BAR1_DAUTH_MAX 4
+#define VK_BAR1_DAUTH_STORE_ADDR(x) \
+ (VK_BAR1_DAUTH_BASE_ADDR + \
+ (x) * (VK_BAR1_DAUTH_STORE_SIZE + VK_BAR1_DAUTH_VALID_SIZE))
+#define VK_BAR1_DAUTH_VALID_ADDR(x) \
+ (VK_BAR1_DAUTH_STORE_ADDR(x) + VK_BAR1_DAUTH_STORE_SIZE)
+
+/* BAR1 SOTP AUTH and REVID info */
+#define VK_BAR1_SOTP_REVID_BASE_ADDR 0x6340
+#define VK_BAR1_SOTP_REVID_SIZE 0x10
+#define VK_BAR1_SOTP_REVID_MAX 2
+#define VK_BAR1_SOTP_REVID_ADDR(x) \
+ (VK_BAR1_SOTP_REVID_BASE_ADDR + (x) * VK_BAR1_SOTP_REVID_SIZE)
+
/* VK device supports a maximum of 3 bars */
#define MAX_BAR 3
@@ -21,9 +198,82 @@ enum pci_barno {
#define BCM_VK_NUM_TTY 2
+/* DAUTH related info */
+struct bcm_vk_dauth_key {
+ char store[VK_BAR1_DAUTH_STORE_SIZE];
+ char valid[VK_BAR1_DAUTH_VALID_SIZE];
+};
+
+struct bcm_vk_dauth_info {
+ struct bcm_vk_dauth_key keys[VK_BAR1_DAUTH_MAX];
+};
+
struct bcm_vk {
struct pci_dev *pdev;
void __iomem *bar[MAX_BAR];
+
+ struct bcm_vk_dauth_info dauth_info;
+
+ int devid; /* dev id allocated */
+
+ struct workqueue_struct *wq_thread;
+ struct work_struct wq_work; /* work queue for deferred job */
+ unsigned long wq_offload[1]; /* various flags on wq requested */
+ void *tdma_vaddr; /* test dma segment virtual addr */
+ dma_addr_t tdma_addr; /* test dma segment bus addr */
+};
+
+/* wq offload work items bits definitions */
+enum bcm_vk_wq_offload_flags {
+ BCM_VK_WQ_DWNLD_PEND = 0,
+ BCM_VK_WQ_DWNLD_AUTO = 1,
};
+/*
+ * check if PCIe interface is down on read. Use it when it is
+ * certain that _val should never be all ones.
+ */
+#define BCM_VK_INTF_IS_DOWN(val) ((val) == 0xffffffff)
+
+static inline u32 vkread32(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
+{
+ return readl(vk->bar[bar] + offset);
+}
+
+static inline void vkwrite32(struct bcm_vk *vk,
+ u32 value,
+ enum pci_barno bar,
+ u64 offset)
+{
+ writel(value, vk->bar[bar] + offset);
+}
+
+static inline u8 vkread8(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
+{
+ return readb(vk->bar[bar] + offset);
+}
+
+static inline void vkwrite8(struct bcm_vk *vk,
+ u8 value,
+ enum pci_barno bar,
+ u64 offset)
+{
+ writeb(value, vk->bar[bar] + offset);
+}
+
+static inline bool bcm_vk_msgq_marker_valid(struct bcm_vk *vk)
+{
+ u32 rdy_marker = 0;
+ u32 fw_status;
+
+ fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
+
+ if ((fw_status & VK_FWSTS_READY) == VK_FWSTS_READY)
+ rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
+
+ return (rdy_marker == VK_BAR1_MSGQ_RDY_MARKER);
+}
+
+int bcm_vk_auto_load_all_images(struct bcm_vk *vk);
+
#endif
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index 14afe2477b97..3fbfcd9b9de8 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -3,16 +3,72 @@
* Copyright 2018-2020 Broadcom.
*/
+#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/fs.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
+#include <uapi/linux/misc/bcm_vk.h>
#include "bcm_vk.h"
#define PCI_DEVICE_ID_VALKYRIE 0x5e87
#define PCI_DEVICE_ID_VIPER 0x5e88
+static DEFINE_IDA(bcm_vk_ida);
+
+enum soc_idx {
+ VALKYRIE_A0 = 0,
+ VALKYRIE_B0,
+ VIPER,
+ VK_IDX_INVALID
+};
+
+enum img_idx {
+ IMG_PRI = 0,
+ IMG_SEC,
+ IMG_PER_TYPE_MAX
+};
+
+struct load_image_entry {
+ const u32 image_type;
+ const char *image_name[IMG_PER_TYPE_MAX];
+};
+
+#define NUM_BOOT_STAGES 2
+/* default firmware images names */
+static const struct load_image_entry image_tab[][NUM_BOOT_STAGES] = {
+ [VALKYRIE_A0] = {
+ {VK_IMAGE_TYPE_BOOT1, {"vk_a0-boot1.bin", "vk-boot1.bin"}},
+ {VK_IMAGE_TYPE_BOOT2, {"vk_a0-boot2.bin", "vk-boot2.bin"}}
+ },
+ [VALKYRIE_B0] = {
+ {VK_IMAGE_TYPE_BOOT1, {"vk_b0-boot1.bin", "vk-boot1.bin"}},
+ {VK_IMAGE_TYPE_BOOT2, {"vk_b0-boot2.bin", "vk-boot2.bin"}}
+ },
+
+ [VIPER] = {
+ {VK_IMAGE_TYPE_BOOT1, {"vp-boot1.bin", ""}},
+ {VK_IMAGE_TYPE_BOOT2, {"vp-boot2.bin", ""}}
+ },
+};
+
+/* Location of memory base addresses of interest in BAR1 */
+/* Load Boot1 to start of ITCM */
+#define BAR1_CODEPUSH_BASE_BOOT1 0x100000
+
+/* Allow minimum 1s for Load Image timeout responses */
+#define LOAD_IMAGE_TIMEOUT_MS (1 * MSEC_PER_SEC)
+
+/* Image startup timeouts */
+#define BOOT1_STARTUP_TIMEOUT_MS (5 * MSEC_PER_SEC)
+#define BOOT2_STARTUP_TIMEOUT_MS (10 * MSEC_PER_SEC)
+
+/* 1ms wait for checking the transfer complete status */
+#define TXFR_COMPLETE_TIMEOUT_MS 1
+
/* MSIX usages */
#define VK_MSIX_MSGQ_MAX 3
#define VK_MSIX_NOTF_MAX 1
@@ -24,13 +80,565 @@
/* Number of bits set in DMA mask*/
#define BCM_VK_DMA_BITS 64
+/* Ucode boot wait time */
+#define BCM_VK_UCODE_BOOT_US (100 * USEC_PER_MSEC)
+/* 50% margin */
+#define BCM_VK_UCODE_BOOT_MAX_US ((BCM_VK_UCODE_BOOT_US * 3) >> 1)
+
+/* deinit time for the card os after receiving doorbell */
+#define BCM_VK_DEINIT_TIME_MS (2 * MSEC_PER_SEC)
+
+/*
+ * module parameters
+ */
+static bool auto_load = true;
+module_param(auto_load, bool, 0444);
+MODULE_PARM_DESC(auto_load,
+ "Load images automatically at PCIe probe time.\n");
+static uint nr_scratch_pages = VK_BAR1_SCRATCH_DEF_NR_PAGES;
+module_param(nr_scratch_pages, uint, 0444);
+MODULE_PARM_DESC(nr_scratch_pages,
+ "Number of pre allocated DMAable coherent pages.\n");
+
+static int bcm_vk_intf_ver_chk(struct bcm_vk *vk)
+{
+ struct device *dev = &vk->pdev->dev;
+ u32 reg;
+ u16 major, minor;
+ int ret = 0;
+
+ /* read interface register */
+ reg = vkread32(vk, BAR_0, BAR_INTF_VER);
+ major = (reg >> BAR_INTF_VER_MAJOR_SHIFT) & BAR_INTF_VER_MASK;
+ minor = reg & BAR_INTF_VER_MASK;
+
+ /*
+ * if major number is 0, it is pre-release and it would be allowed
+ * to continue, else, check versions accordingly
+ */
+ if (!major) {
+ dev_warn(dev, "Pre-release major.minor=%d.%d - drv %d.%d\n",
+ major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
+ } else if (major != SEMANTIC_MAJOR) {
+ dev_err(dev,
+ "Intf major.minor=%d.%d rejected - drv %d.%d\n",
+ major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
+ ret = -EPFNOSUPPORT;
+ } else {
+ dev_dbg(dev,
+ "Intf major.minor=%d.%d passed - drv %d.%d\n",
+ major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
+ }
+ return ret;
+}
+
+static inline int bcm_vk_wait(struct bcm_vk *vk, enum pci_barno bar,
+ u64 offset, u32 mask, u32 value,
+ unsigned long timeout_ms)
+{
+ struct device *dev = &vk->pdev->dev;
+ unsigned long start_time;
+ unsigned long timeout;
+ u32 rd_val, boot_status;
+
+ start_time = jiffies;
+ timeout = start_time + msecs_to_jiffies(timeout_ms);
+
+ do {
+ rd_val = vkread32(vk, bar, offset);
+ dev_dbg(dev, "BAR%d Offset=0x%llx: 0x%x\n",
+ bar, offset, rd_val);
+
+ /* check for any boot err condition */
+ boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+ if (boot_status & BOOT_ERR_MASK) {
+ dev_err(dev, "Boot Err 0x%x, progress 0x%x after %d ms\n",
+ (boot_status & BOOT_ERR_MASK) >> BOOT_ERR_SHIFT,
+ boot_status & BOOT_PROG_MASK,
+ jiffies_to_msecs(jiffies - start_time));
+ return -EFAULT;
+ }
+
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ cpu_relax();
+ cond_resched();
+ } while ((rd_val & mask) != value);
+
+ return 0;
+}
+
+static int bcm_vk_sync_card_info(struct bcm_vk *vk)
+{
+ u32 rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
+
+ /* check for marker, but allow diags mode to skip sync */
+ if (!bcm_vk_msgq_marker_valid(vk))
+ return (rdy_marker == VK_BAR1_DIAG_RDY_MARKER ? 0 : -EINVAL);
+
+ /*
+ * Write down scratch addr which is used for DMA. For
+ * signed part, BAR1 is accessible only after boot2 has come
+ * up
+ */
+ if (vk->tdma_addr) {
+ vkwrite32(vk, (u64)vk->tdma_addr >> 32, BAR_1,
+ VK_BAR1_SCRATCH_OFF_HI);
+ vkwrite32(vk, (u32)vk->tdma_addr, BAR_1,
+ VK_BAR1_SCRATCH_OFF_LO);
+ vkwrite32(vk, nr_scratch_pages * PAGE_SIZE, BAR_1,
+ VK_BAR1_SCRATCH_SZ_ADDR);
+ }
+ return 0;
+}
+
+static void bcm_vk_buf_notify(struct bcm_vk *vk, void *bufp,
+ dma_addr_t host_buf_addr, u32 buf_size)
+{
+ /* update the dma address to the card */
+ vkwrite32(vk, (u64)host_buf_addr >> 32, BAR_1,
+ VK_BAR1_DMA_BUF_OFF_HI);
+ vkwrite32(vk, (u32)host_buf_addr, BAR_1,
+ VK_BAR1_DMA_BUF_OFF_LO);
+ vkwrite32(vk, buf_size, BAR_1, VK_BAR1_DMA_BUF_SZ);
+}
+
+static int bcm_vk_load_image_by_type(struct bcm_vk *vk, u32 load_type,
+ const char *filename)
+{
+ struct device *dev = &vk->pdev->dev;
+ const struct firmware *fw = NULL;
+ void *bufp = NULL;
+ size_t max_buf, offset;
+ int ret;
+ u64 offset_codepush;
+ u32 codepush;
+ u32 value;
+ dma_addr_t boot_dma_addr;
+ bool is_stdalone;
+
+ if (load_type == VK_IMAGE_TYPE_BOOT1) {
+ /*
+ * After POR, enable VK soft BOOTSRC so bootrom do not clear
+ * the pushed image (the TCM memories).
+ */
+ value = vkread32(vk, BAR_0, BAR_BOOTSRC_SELECT);
+ value |= BOOTSRC_SOFT_ENABLE;
+ vkwrite32(vk, value, BAR_0, BAR_BOOTSRC_SELECT);
+
+ codepush = CODEPUSH_BOOTSTART + CODEPUSH_BOOT1_ENTRY;
+ offset_codepush = BAR_CODEPUSH_SBL;
+
+ /* Write a 1 to request SRAM open bit */
+ vkwrite32(vk, CODEPUSH_BOOTSTART, BAR_0, offset_codepush);
+
+ /* Wait for VK to respond */
+ ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, SRAM_OPEN,
+ SRAM_OPEN, LOAD_IMAGE_TIMEOUT_MS);
+ if (ret < 0) {
+ dev_err(dev, "boot1 wait SRAM err - ret(%d)\n", ret);
+ goto err_buf_out;
+ }
+
+ max_buf = SZ_256K;
+ bufp = dma_alloc_coherent(dev,
+ max_buf,
+ &boot_dma_addr, GFP_KERNEL);
+ if (!bufp) {
+ dev_err(dev, "Error allocating 0x%zx\n", max_buf);
+ ret = -ENOMEM;
+ goto err_buf_out;
+ }
+ } else if (load_type == VK_IMAGE_TYPE_BOOT2) {
+ codepush = CODEPUSH_BOOT2_ENTRY;
+ offset_codepush = BAR_CODEPUSH_SBI;
+
+ /* Wait for VK to respond */
+ ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, DDR_OPEN,
+ DDR_OPEN, LOAD_IMAGE_TIMEOUT_MS);
+ if (ret < 0) {
+ dev_err(dev, "boot2 wait DDR open error - ret(%d)\n",
+ ret);
+ goto err_buf_out;
+ }
+
+ max_buf = SZ_4M;
+ bufp = dma_alloc_coherent(dev,
+ max_buf,
+ &boot_dma_addr, GFP_KERNEL);
+ if (!bufp) {
+ dev_err(dev, "Error allocating 0x%zx\n", max_buf);
+ ret = -ENOMEM;
+ goto err_buf_out;
+ }
+
+ bcm_vk_buf_notify(vk, bufp, boot_dma_addr, max_buf);
+ } else {
+ dev_err(dev, "Error invalid image type 0x%x\n", load_type);
+ ret = -EINVAL;
+ goto err_buf_out;
+ }
+
+ offset = 0;
+ ret = request_partial_firmware_into_buf(&fw, filename, dev,
+ bufp, max_buf, offset);
+ if (ret) {
+ dev_err(dev, "Error %d requesting firmware file: %s\n",
+ ret, filename);
+ goto err_firmware_out;
+ }
+ dev_dbg(dev, "size=0x%zx\n", fw->size);
+ if (load_type == VK_IMAGE_TYPE_BOOT1)
+ memcpy_toio(vk->bar[BAR_1] + BAR1_CODEPUSH_BASE_BOOT1,
+ bufp,
+ fw->size);
+
+ dev_dbg(dev, "Signaling 0x%x to 0x%llx\n", codepush, offset_codepush);
+ vkwrite32(vk, codepush, BAR_0, offset_codepush);
+
+ if (load_type == VK_IMAGE_TYPE_BOOT1) {
+ u32 boot_status;
+
+ /* wait until done */
+ ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
+ BOOT1_RUNNING,
+ BOOT1_RUNNING,
+ BOOT1_STARTUP_TIMEOUT_MS);
+
+ boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+ is_stdalone = !BCM_VK_INTF_IS_DOWN(boot_status) &&
+ (boot_status & BOOT_STDALONE_RUNNING);
+ if (ret && !is_stdalone) {
+ dev_err(dev,
+ "Timeout %ld ms waiting for boot1 to come up - ret(%d)\n",
+ BOOT1_STARTUP_TIMEOUT_MS, ret);
+ goto err_firmware_out;
+ } else if (is_stdalone) {
+ u32 reg;
+
+ reg = vkread32(vk, BAR_0, BAR_BOOT1_STDALONE_PROGRESS);
+ if ((reg & BOOT1_STDALONE_PROGRESS_MASK) ==
+ BOOT1_STDALONE_SUCCESS) {
+ dev_info(dev, "Boot1 standalone success\n");
+ ret = 0;
+ } else {
+ dev_err(dev, "Timeout %ld ms - Boot1 standalone failure\n",
+ BOOT1_STARTUP_TIMEOUT_MS);
+ ret = -EINVAL;
+ goto err_firmware_out;
+ }
+ }
+ } else if (load_type == VK_IMAGE_TYPE_BOOT2) {
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
+
+ /* To send more data to VK than max_buf allowed at a time */
+ do {
+ /*
+ * Check for ack from card. when Ack is received,
+ * it means all the data is received by card.
+ * Exit the loop after ack is received.
+ */
+ ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
+ FW_LOADER_ACK_RCVD_ALL_DATA,
+ FW_LOADER_ACK_RCVD_ALL_DATA,
+ TXFR_COMPLETE_TIMEOUT_MS);
+ if (ret == 0) {
+ dev_dbg(dev, "Exit boot2 download\n");
+ break;
+ } else if (ret == -EFAULT) {
+ dev_err(dev, "Error detected during ACK waiting");
+ goto err_firmware_out;
+ }
+
+ /* exit the loop, if there is no response from card */
+ if (time_after(jiffies, timeout)) {
+ dev_err(dev, "Error. No reply from card\n");
+ ret = -ETIMEDOUT;
+ goto err_firmware_out;
+ }
+
+ /* Wait for VK to open BAR space to copy new data */
+ ret = bcm_vk_wait(vk, BAR_0, offset_codepush,
+ codepush, 0,
+ TXFR_COMPLETE_TIMEOUT_MS);
+ if (ret == 0) {
+ offset += max_buf;
+ ret = request_partial_firmware_into_buf
+ (&fw,
+ filename,
+ dev, bufp,
+ max_buf,
+ offset);
+ if (ret) {
+ dev_err(dev,
+ "Error %d requesting firmware file: %s offset: 0x%zx\n",
+ ret, filename, offset);
+ goto err_firmware_out;
+ }
+ dev_dbg(dev, "size=0x%zx\n", fw->size);
+ dev_dbg(dev, "Signaling 0x%x to 0x%llx\n",
+ codepush, offset_codepush);
+ vkwrite32(vk, codepush, BAR_0, offset_codepush);
+ /* reload timeout after every codepush */
+ timeout = jiffies +
+ msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
+ } else if (ret == -EFAULT) {
+ dev_err(dev, "Error detected waiting for transfer\n");
+ goto err_firmware_out;
+ }
+ } while (1);
+
+ /* wait for fw status bits to indicate app ready */
+ ret = bcm_vk_wait(vk, BAR_0, VK_BAR_FWSTS,
+ VK_FWSTS_READY,
+ VK_FWSTS_READY,
+ BOOT2_STARTUP_TIMEOUT_MS);
+ if (ret < 0) {
+ dev_err(dev, "Boot2 not ready - ret(%d)\n", ret);
+ goto err_firmware_out;
+ }
+
+ is_stdalone = vkread32(vk, BAR_0, BAR_BOOT_STATUS) &
+ BOOT_STDALONE_RUNNING;
+ if (!is_stdalone) {
+ ret = bcm_vk_intf_ver_chk(vk);
+ if (ret) {
+ dev_err(dev, "failure in intf version check\n");
+ goto err_firmware_out;
+ }
+
+ /* sync & channel other info */
+ ret = bcm_vk_sync_card_info(vk);
+ if (ret) {
+ dev_err(dev, "Syncing Card Info failure\n");
+ goto err_firmware_out;
+ }
+ }
+ }
+
+err_firmware_out:
+ release_firmware(fw);
+
+err_buf_out:
+ if (bufp)
+ dma_free_coherent(dev, max_buf, bufp, boot_dma_addr);
+
+ return ret;
+}
+
+static u32 bcm_vk_next_boot_image(struct bcm_vk *vk)
+{
+ u32 boot_status;
+ u32 fw_status;
+ u32 load_type = 0; /* default for unknown */
+
+ boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+ fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
+
+ if (!BCM_VK_INTF_IS_DOWN(boot_status) && (boot_status & SRAM_OPEN))
+ load_type = VK_IMAGE_TYPE_BOOT1;
+ else if (boot_status == BOOT1_RUNNING)
+ load_type = VK_IMAGE_TYPE_BOOT2;
+
+ /* Log status so that we know different stages */
+ dev_info(&vk->pdev->dev,
+ "boot-status value for next image: 0x%x : fw-status 0x%x\n",
+ boot_status, fw_status);
+
+ return load_type;
+}
+
+static enum soc_idx get_soc_idx(struct bcm_vk *vk)
+{
+ struct pci_dev *pdev = vk->pdev;
+ enum soc_idx idx = VK_IDX_INVALID;
+ u32 rev;
+ static enum soc_idx const vk_soc_tab[] = { VALKYRIE_A0, VALKYRIE_B0 };
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_VALKYRIE:
+ /* get the chip id to decide sub-class */
+ rev = MAJOR_SOC_REV(vkread32(vk, BAR_0, BAR_CHIP_ID));
+ if (rev < ARRAY_SIZE(vk_soc_tab)) {
+ idx = vk_soc_tab[rev];
+ } else {
+ /* Default to A0 firmware for all other chip revs */
+ idx = VALKYRIE_A0;
+ dev_warn(&pdev->dev,
+ "Rev %d not in image lookup table, default to idx=%d\n",
+ rev, idx);
+ }
+ break;
+
+ case PCI_DEVICE_ID_VIPER:
+ idx = VIPER;
+ break;
+
+ default:
+ dev_err(&pdev->dev, "no images for 0x%x\n", pdev->device);
+ }
+ return idx;
+}
+
+static const char *get_load_fw_name(struct bcm_vk *vk,
+ const struct load_image_entry *entry)
+{
+ const struct firmware *fw;
+ struct device *dev = &vk->pdev->dev;
+ int ret;
+ unsigned long dummy;
+ int i;
+
+ for (i = 0; i < IMG_PER_TYPE_MAX; i++) {
+ fw = NULL;
+ ret = request_partial_firmware_into_buf(&fw,
+ entry->image_name[i],
+ dev, &dummy,
+ sizeof(dummy),
+ 0);
+ release_firmware(fw);
+ if (!ret)
+ return entry->image_name[i];
+ }
+ return NULL;
+}
+
+int bcm_vk_auto_load_all_images(struct bcm_vk *vk)
+{
+ int i, ret = -1;
+ enum soc_idx idx;
+ struct device *dev = &vk->pdev->dev;
+ u32 curr_type;
+ const char *curr_name;
+
+ idx = get_soc_idx(vk);
+ if (idx == VK_IDX_INVALID)
+ goto auto_load_all_exit;
+
+ /* log a message to know the relative loading order */
+ dev_dbg(dev, "Load All for device %d\n", vk->devid);
+
+ for (i = 0; i < NUM_BOOT_STAGES; i++) {
+ curr_type = image_tab[idx][i].image_type;
+ if (bcm_vk_next_boot_image(vk) == curr_type) {
+ curr_name = get_load_fw_name(vk, &image_tab[idx][i]);
+ if (!curr_name) {
+ dev_err(dev, "No suitable firmware exists for type %d",
+ curr_type);
+ ret = -ENOENT;
+ goto auto_load_all_exit;
+ }
+ ret = bcm_vk_load_image_by_type(vk, curr_type,
+ curr_name);
+ dev_info(dev, "Auto load %s, ret %d\n",
+ curr_name, ret);
+
+ if (ret) {
+ dev_err(dev, "Error loading default %s\n",
+ curr_name);
+ goto auto_load_all_exit;
+ }
+ }
+ }
+
+auto_load_all_exit:
+ return ret;
+}
+
+static int bcm_vk_trigger_autoload(struct bcm_vk *vk)
+{
+ if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0)
+ return -EPERM;
+
+ set_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
+ queue_work(vk->wq_thread, &vk->wq_work);
+
+ return 0;
+}
+
+/*
+ * deferred work queue for auto download.
+ */
+static void bcm_vk_wq_handler(struct work_struct *work)
+{
+ struct bcm_vk *vk = container_of(work, struct bcm_vk, wq_work);
+
+ if (test_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload)) {
+ bcm_vk_auto_load_all_images(vk);
+
+ /*
+ * at the end of operation, clear AUTO bit and pending
+ * bit
+ */
+ clear_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
+ clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
+ }
+}
+
+static void bcm_to_v_reset_doorbell(struct bcm_vk *vk, u32 db_val)
+{
+ vkwrite32(vk, db_val, BAR_0, VK_BAR0_RESET_DB_BASE);
+}
+
+static int bcm_vk_trigger_reset(struct bcm_vk *vk)
+{
+ u32 i;
+ u32 value, boot_status;
+
+ /* make tag '\0' terminated */
+ vkwrite32(vk, 0, BAR_1, VK_BAR1_BOOT1_VER_TAG);
+
+ for (i = 0; i < VK_BAR1_DAUTH_MAX; i++) {
+ vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_STORE_ADDR(i));
+ vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_VALID_ADDR(i));
+ }
+ for (i = 0; i < VK_BAR1_SOTP_REVID_MAX; i++)
+ vkwrite32(vk, 0, BAR_1, VK_BAR1_SOTP_REVID_ADDR(i));
+
+ /*
+ * When boot request fails, the CODE_PUSH_OFFSET stays persistent.
+ * Allowing us to debug the failure. When we call reset,
+ * we should clear CODE_PUSH_OFFSET so ROM does not execute
+ * boot again (and fails again) and instead waits for a new
+ * codepush. And, if previous boot has encountered error, need
+ * to clear the entry values
+ */
+ boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+ if (boot_status & BOOT_ERR_MASK) {
+ dev_info(&vk->pdev->dev,
+ "Card in boot error 0x%x, clear CODEPUSH val\n",
+ boot_status);
+ value = 0;
+ } else {
+ value = vkread32(vk, BAR_0, BAR_CODEPUSH_SBL);
+ value &= CODEPUSH_MASK;
+ }
+ vkwrite32(vk, value, BAR_0, BAR_CODEPUSH_SBL);
+
+ /* reset fw_status with proper reason, and press db */
+ vkwrite32(vk, VK_FWSTS_RESET_MBOX_DB, BAR_0, VK_BAR_FWSTS);
+ bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_SOFT);
+
+ /* clear other necessary registers records */
+ vkwrite32(vk, 0, BAR_0, BAR_OS_UPTIME);
+ vkwrite32(vk, 0, BAR_0, BAR_INTF_VER);
+
+ return 0;
+}
+
static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err;
int i;
+ int id;
int irq;
+ char name[20];
struct bcm_vk *vk;
struct device *dev = &pdev->dev;
+ u32 boot_status;
vk = kzalloc(sizeof(*vk), GFP_KERNEL);
if (!vk)
@@ -57,6 +665,18 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_disable_pdev;
}
+ /* The tdma is a scratch area for some DMA testings. */
+ if (nr_scratch_pages) {
+ vk->tdma_vaddr = dma_alloc_coherent
+ (dev,
+ nr_scratch_pages * PAGE_SIZE,
+ &vk->tdma_addr, GFP_KERNEL);
+ if (!vk->tdma_vaddr) {
+ err = -ENOMEM;
+ goto err_disable_pdev;
+ }
+ }
+
pci_set_master(pdev);
pci_set_drvdata(pdev, vk);
@@ -85,8 +705,53 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
+ id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ err = id;
+ dev_err(dev, "unable to get id\n");
+ goto err_iounmap;
+ }
+
+ vk->devid = id;
+ snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
+
+ INIT_WORK(&vk->wq_work, bcm_vk_wq_handler);
+
+ /* create dedicated workqueue */
+ vk->wq_thread = create_singlethread_workqueue(name);
+ if (!vk->wq_thread) {
+ dev_err(dev, "Fail to create workqueue thread\n");
+ err = -ENOMEM;
+ goto err_ida_remove;
+ }
+
+ /* sync other info */
+ bcm_vk_sync_card_info(vk);
+
+ /*
+ * lets trigger an auto download. We don't want to do it serially here
+ * because at probing time, it is not supposed to block for a long time.
+ */
+ boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+ if (auto_load) {
+ if ((boot_status & BOOT_STATE_MASK) == BROM_RUNNING) {
+ if (bcm_vk_trigger_autoload(vk))
+ goto err_destroy_workqueue;
+ } else {
+ dev_err(dev,
+ "Auto-load skipped - BROM not in proper state (0x%x)\n",
+ boot_status);
+ }
+ }
+
return 0;
+err_destroy_workqueue:
+ destroy_workqueue(vk->wq_thread);
+
+err_ida_remove:
+ ida_simple_remove(&bcm_vk_ida, id);
+
err_iounmap:
for (i = 0; i < MAX_BAR; i++) {
if (vk->bar[i])
@@ -95,6 +760,10 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_release_regions(pdev);
err_disable_pdev:
+ if (vk->tdma_vaddr)
+ dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
+ vk->tdma_vaddr, vk->tdma_addr);
+
pci_free_irq_vectors(pdev);
pci_disable_device(pdev);
pci_dev_put(pdev);
@@ -110,6 +779,22 @@ static void bcm_vk_remove(struct pci_dev *pdev)
int i;
struct bcm_vk *vk = pci_get_drvdata(pdev);
+ /*
+ * Trigger a reset to card and wait enough time for UCODE to rerun,
+ * which re-initialize the card into its default state.
+ * This ensures when driver is re-enumerated it will start from
+ * a completely clean state.
+ */
+ bcm_vk_trigger_reset(vk);
+ usleep_range(BCM_VK_UCODE_BOOT_US, BCM_VK_UCODE_BOOT_MAX_US);
+
+ if (vk->tdma_vaddr)
+ dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
+ vk->tdma_vaddr, vk->tdma_addr);
+
+ cancel_work_sync(&vk->wq_work);
+ destroy_workqueue(vk->wq_thread);
+
for (i = 0; i < MAX_BAR; i++) {
if (vk->bar[i])
pci_iounmap(pdev, vk->bar[i]);
@@ -120,6 +805,38 @@ static void bcm_vk_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
+static void bcm_vk_shutdown(struct pci_dev *pdev)
+{
+ struct bcm_vk *vk = pci_get_drvdata(pdev);
+ u32 reg, boot_stat;
+
+ reg = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
+ boot_stat = reg & BOOT_STATE_MASK;
+
+ if (boot_stat == BOOT1_RUNNING) {
+ /* simply trigger a reset interrupt to park it */
+ bcm_vk_trigger_reset(vk);
+ } else if (boot_stat == BROM_NOT_RUN) {
+ int err;
+ u16 lnksta;
+
+ /*
+ * The boot status only reflects boot condition since last reset
+ * As ucode will run only once to configure pcie, if multiple
+ * resets happen, we lost track if ucode has run or not.
+ * Here, read the current link speed and use that to
+ * sync up the bootstatus properly so that on reboot-back-up,
+ * it has the proper state to start with autoload
+ */
+ err = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
+ if (!err &&
+ (lnksta & PCI_EXP_LNKSTA_CLS) != PCI_EXP_LNKSTA_CLS_2_5GB) {
+ reg |= BROM_STATUS_COMPLETE;
+ vkwrite32(vk, reg, BAR_0, BAR_BOOT_STATUS);
+ }
+ }
+}
+
static const struct pci_device_id bcm_vk_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VALKYRIE), },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VIPER), },
@@ -132,6 +849,7 @@ static struct pci_driver pci_driver = {
.id_table = bcm_vk_ids,
.probe = bcm_vk_probe,
.remove = bcm_vk_remove,
+ .shutdown = bcm_vk_shutdown,
};
module_pci_driver(pci_driver);
--
2.17.1