[PATCH v5 0/4] TI K3 R5F remoteproc support

[Suman Anna]

Hi Bjorn,

The following is v5 of the TI K3 R5F remoteproc driver series supporting all
the R5F processor clusters/subsystems on TI AM65x and J721E SoCs. Please
see the v1 cover-letter [1] for the features supported on these R5F processors.

This series has only 1 line change w.r.t v4 version [4], the example in 
dt-bindings is updated to fix couple of dt_binding_check warnings when 
applied against the latest linux-next version due to a base TI binding
conversion to YAML.

Rob has left it to your discretion w.r.t the bindings, so appreciate it
if you can review the binding and pick up the series for 5.10.

regards
Suman

[1] R5F v1: https://patchwork.kernel.org/cover/11456367/
[2] R5F v2: https://patchwork.kernel.org/cover/11632993/
[3] R5F v3: https://patchwork.kernel.org/cover/11679327/
[4] R5F v4: https://patchwork.kernel.org/cover/11763783/

Suman Anna (4):
  dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
  remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem
  remoteproc: k3-r5: Initialize TCM memories for ECC
  remoteproc: k3-r5: Add loading support for on-chip SRAM regions

 .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  |  281 ++++
 drivers/remoteproc/Kconfig                    |   13 +
 drivers/remoteproc/Makefile                   |    1 +
 drivers/remoteproc/ti_k3_r5_remoteproc.c      | 1395 +++++++++++++++++
 4 files changed, 1690 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
 create mode 100644 drivers/remoteproc/ti_k3_r5_remoteproc.c

-- 
2.28.0