Re: [PATCH 1/2] usb: serial: qmi_wwan: add Cellient MPL200 card

[Wilken Gottwalt]

On Sun, 04 Oct 2020 17:29:38 +0200
Bjørn Mork <bjorn@xxxxxxx> wrote:

> Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxxx> writes:
> 
> > Add usb ids of the Cellient MPL200 card.
> >
> > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxxx>
> > ---
> >  drivers/net/usb/qmi_wwan.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
> > index 07c42c0719f5..0bf2b19d5d54 100644
> > --- a/drivers/net/usb/qmi_wwan.c
> > +++ b/drivers/net/usb/qmi_wwan.c
> 
> This is not a 'usb: serial' driver. Please resend with a less confusing
> subject prefix.
> 
> > @@ -1432,6 +1432,7 @@ static const struct usb_device_id products[] = {
> >  	{QMI_GOBI_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
> >  	{QMI_GOBI_DEVICE(0x12d1, 0x14f1)},	/* Sony Gobi 3000 Composite */
> >  	{QMI_GOBI_DEVICE(0x1410, 0xa021)},	/* Foxconn Gobi 3000 Modem device (Novatel
> > E396) */
> > +	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},	/* Cellient MPL200 (rebranded Qualcomm
> > 0x05c6) */ 
> >  	{ }					/* END */
> >  };
> 
> 
> This table is supposed to be organized by device type.  The last section
> is for Gobi2k and Gobi3k devices.  Please try to put new devices into
> the correct section.

Oh sorry, looks like I got it mixed up a bit. It was my first attempt to submit
a patch set. Which is the best way to resubmit an update if the other part of
the patch set gets accepted? The documentation about re-/submitting patch sets
is a bit thin.

Will