[GIT PULL v2] extcon next for v5.10

[Chanwoo Choi]

Dear Greg,

This is extcon-next pull request for v5.10. I add detailed description of
this pull request on below. Please pull extcon with following updates.

Changes from v1:
- Fix the wrong commit id of patch.

Best Regards,
Chanwoo Choi


The following changes since commit 856deb866d16e29bd65952e0289066f6078af773:

  Linux 5.9-rc5 (2020-09-13 16:06:00 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-next-for-5.10-v2

for you to fetch changes up to dbc888072a976c2a7f74ad2df1ca3e6894f96002:

  extcon: axp288: Use module_platform_driver to simplify the code (2020-09-30 00:40:06 +0900)

----------------------------------------------------------------

Detailed description for this pull request:

1. Update extcon driver with minor updates:
- Covert the devicetree binding format from txt to yaml and edit
  the bidning document for extcon-ptn5150.c.

- Clean-up the code of extcon-ptn5150.c without any behavior changes.

- Replace HTTP links with HTTPS ones on extcon-palmas.c and extcon-usb-gpio.c.

- Return the proper error code on extcon-max14577/max77693/max77843.c.

- Simplify with dev_err_probe() on extcon-palmas.c.

- Use module_platform_driver to simplify the code on extcon-axp288.c.

2. Update MAINTAINERS
- Add Krzysztof Kozlowski as maintainer of NXP PTN5150A CC/extcon driver
to provide review, feedback and testing.

----------------------------------------------------------------
Alexander A. Klimov (1):
      extcon: Replace HTTP links with HTTPS ones

Andy Shevchenko (1):
      extcon: ptn5150: Deduplicate parts of dev_err_probe()

Krzysztof Kozlowski (20):
      dt-bindings: extcon: ptn5150: Convert binding to DT schema
      dt-bindings: extcon: ptn5150: Use generic "interrupts" property
      dt-bindings: extcon: ptn5150: Make 'vbus-gpios' optional
      extcon: ptn5150: Fix usage of atomic GPIO with sleeping GPIO chips
      extcon: ptn5150: Use generic "interrupts" property
      extcon: ptn5150: Simplify getting vbus-gpios with flags
      extcon: ptn5150: Lower the noisiness of probe
      extcon: ptn5150: Check current USB mode when probing
      extcon: ptn5150: Make 'vbus-gpios' optional
      extcon: ptn5150: Reduce the amount of logs on deferred probe
      extcon: ptn5150: Convert to module_i2c_driver
      extcon: ptn5150: Convert to .probe_new
      MAINTAINERS: Add entry for NXP PTN5150A CC driver
      extcon: max14577: Return error code of extcon_dev_allocate()
      extcon: max77693: Return error code of extcon_dev_allocate()
      extcon: max77843: Return error code of extcon_dev_allocate()
      extcon: max8997: Return error code of extcon_dev_allocate()
      extcon: palmas: Simplify with dev_err_probe()
      extcon: ptn5150: Use defines for registers
      extcon: ptn5150: Do not print error during probe if nothing is attached

Liu Shixin (1):
      extcon: axp288: Use module_platform_driver to simplify the code

Ramuthevar Vadivel Murugan (2):
      extcon: ptn5150: Switch to GENMASK() and BIT() macros
      extcon: ptn5150: Set the VBUS and POLARITY property capability

 .../devicetree/bindings/extcon/extcon-ptn5150.txt  |  27 ---
 .../devicetree/bindings/extcon/extcon-ptn5150.yaml |  60 ++++++
 MAINTAINERS                                        |   7 +
 drivers/extcon/extcon-axp288.c                     |  13 +-
 drivers/extcon/extcon-max14577.c                   |   2 +-
 drivers/extcon/extcon-max77693.c                   |   2 +-
 drivers/extcon/extcon-max77843.c                   |   2 +-
 drivers/extcon/extcon-max8997.c                    |   2 +-
 drivers/extcon/extcon-palmas.c                     |  20 +-
 drivers/extcon/extcon-ptn5150.c                    | 226 ++++++++++-----------
 drivers/extcon/extcon-usb-gpio.c                   |   2 +-
 11 files changed, 185 insertions(+), 178 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
 create mode 100644 Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml