Re: [PATCH 01/25] ASoC: sun8i-codec: Set up clock tree at probe time

[Maxime Ripard]

On Wed, Sep 30, 2020 at 09:11:24PM -0500, Samuel Holland wrote:
> The sun8i codec is effectively an on-die variant of the X-Powers AC100
> codec. The AC100 can derive its clocks from either of two I2S master
> clocks or an internal PLL. For the on-die variant, Allwinner replaced
> the codec's own PLL with a connection to SoC's existing PLL_AUDIO, and
> they connected both I2S MCLK inputs to the same source -- which happens
> to be an integer divider from the same PLL_AUDIO.
> 
> So there's actually no clocking flexibility. To run SYSCLK at the
> required rate, it must be run straight from the PLL. The only choice is
> whether it goes through AIF1CLK or AIF2CLK. Since both run at the same
> rate, the only effect of that choice is which field in SYS_SR_CTRL
> (AIF1_FS or AIF2_FS) controls the system sample rate.
> 
> Since AIFnCLK is required to bring up the corresponding DAI, and AIF1
> (connected to the CPU) is used most often, let's use AIF1CLK as the
> SYSCLK parent. That means we no longer need to set AIF2_FS.
> 
> Since this clock tree never changes, we can program it from the
> component probe function, instead of using DAPM widgets. The DAPM
> widgets unnecessarily change clock parents when the codec goes in/out
> of idle and the supply widgets are powered up/down.
> 
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>

Acked-by: Maxime Ripard <mripard@xxxxxxxxxx>

Maxime

Attachment: signature.asc
Description: PGP signature