[PATCH v3] regmap: irq: Add support to clear ack registers

[Laxminath Kasam]

For particular codec HWs have requirement to toggle interrupt clear
register twice 0->1->0. To accommodate it, need to add one more field
(clear_ack) in the regmap_irq struct and update regmap-irq driver to
support it.

Signed-off-by: Laxminath Kasam <lkasam@xxxxxxxxxxxxxx>
---
Changes from v2:
Updated commit text
---
 drivers/base/regmap/regmap-irq.c | 33 ++++++++++++++++++++++++++++++++-
 include/linux/regmap.h           |  2 ++
 2 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 369a57e..ad5c2de 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -168,6 +168,14 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
 				ret = regmap_write(map, reg, ~d->mask_buf[i]);
 			else
 				ret = regmap_write(map, reg, d->mask_buf[i]);
+			if (d->chip->clear_ack) {
+				if (d->chip->ack_invert && !ret)
+					ret = regmap_write(map, reg,
+							   d->mask_buf[i]);
+				else if (!ret)
+					ret = regmap_write(map, reg,
+							   ~d->mask_buf[i]);
+			}
 			if (ret != 0)
 				dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
 					reg, ret);
@@ -493,7 +501,20 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 		if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) {
 			reg = chip->ack_base +
 				(i * map->reg_stride * data->irq_reg_stride);
-			ret = regmap_write(map, reg, data->status_buf[i]);
+			if (chip->ack_invert)
+				ret = regmap_write(map, reg,
+						~data->status_buf[i]);
+			else
+				ret = regmap_write(map, reg,
+						data->status_buf[i]);
+			if (chip->clear_ack) {
+				if (chip->ack_invert && !ret)
+					ret = regmap_write(map, reg,
+							data->status_buf[i]);
+				else if (!ret)
+					ret = regmap_write(map, reg,
+							~data->status_buf[i]);
+			}
 			if (ret != 0)
 				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
 					reg, ret);
@@ -722,6 +743,16 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
 			else
 				ret = regmap_write(map, reg,
 					d->status_buf[i] & d->mask_buf[i]);
+			if (chip->clear_ack) {
+				if (chip->ack_invert && !ret)
+					ret = regmap_write(map, reg,
+						(d->status_buf[i] &
+						 d->mask_buf[i]));
+				else if (!ret)
+					ret = regmap_write(map, reg,
+						~(d->status_buf[i] &
+						  d->mask_buf[i]));
+			}
 			if (ret != 0) {
 				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
 					reg, ret);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 1970ed5..0701671 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1305,6 +1305,7 @@ struct regmap_irq_sub_irq_map {
  * @mask_invert: Inverted mask register: cleared bits are masked out.
  * @use_ack:     Use @ack register even if it is zero.
  * @ack_invert:  Inverted ack register: cleared bits for ack.
+ * @clear_ack:  Use this to set 1 and 0 or vice-versa to clear interrupts.
  * @wake_invert: Inverted wake register: cleared bits are wake enabled.
  * @type_invert: Invert the type flags.
  * @type_in_mask: Use the mask registers for controlling irq type. For
@@ -1353,6 +1354,7 @@ struct regmap_irq_chip {
 	bool mask_invert:1;
 	bool use_ack:1;
 	bool ack_invert:1;
+	bool clear_ack:1;
 	bool wake_invert:1;
 	bool runtime_pm:1;
 	bool type_invert:1;
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.