[PATCH v7 10/12] ARM: dts: stm32: Fix schema warnings for pwm-leds

[Alexander Dahl]

The node names for devices using the pwm-leds driver follow a certain
naming scheme (now).  Parent node name is not enforced, but recommended
by DT project.

  DTC     arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
  CHECK   arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml: led-rgb: 'led-blue', 'led-green', 'led-red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
        From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml

Signed-off-by: Alexander Dahl <post@xxxxxxxxxxx>
---

Notes:
    v6 -> v7:
      * split up patch (one per sub arch)
      * added actual warnings to commit message

 arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 5700e6b700d3..25d548cb975b 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -36,34 +36,34 @@
 		stdout-path = &uart4;
 	};
 
-	led-act {
+	led-controller-1 {
 		compatible = "gpio-leds";
 
-		led-green {
+		led-1 {
 			label = "mc1:green:act";
 			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	led-rgb {
+	led-controller-2 {
 		compatible = "pwm-leds";
 
-		led-red {
+		led-2 {
 			label = "mc1:red:rgb";
 			pwms = <&leds_pwm 1 1000000 0>;
 			max-brightness = <255>;
 			active-low;
 		};
 
-		led-green {
+		led-3 {
 			label = "mc1:green:rgb";
 			pwms = <&leds_pwm 2 1000000 0>;
 			max-brightness = <255>;
 			active-low;
 		};
 
-		led-blue {
+		led-4 {
 			label = "mc1:blue:rgb";
 			pwms = <&leds_pwm 3 1000000 0>;
 			max-brightness = <255>;
-- 
2.20.1