Re: [PATCH v3 06/24] dt-bindings: mediatek: Add binding for mt8192 IOMMU

[Krzysztof Kozlowski]

On Tue, Oct 06, 2020 at 12:26:45PM +0800, Yong Wu wrote:
> Hi Krzysztof,
> 
> On Fri, 2020-10-02 at 13:10 +0200, Krzysztof Kozlowski wrote:
> > On Wed, Sep 30, 2020 at 03:06:29PM +0800, Yong Wu wrote:
> > > This patch adds decriptions for mt8192 IOMMU and SMI.
> > > 
> > > mt8192 also is MTK IOMMU gen2 which uses ARM Short-Descriptor translation
> > > table format. The M4U-SMI HW diagram is as below:
> > > 
> > >                           EMI
> > >                            |
> > >                           M4U
> > >                            |
> > >                       ------------
> > >                        SMI Common
> > >                       ------------
> > >                            |
> > >   +-------+------+------+----------------------+-------+
> > >   |       |      |      |       ......         |       |
> > >   |       |      |      |                      |       |
> > > larb0   larb1  larb2  larb4     ......      larb19   larb20
> > > disp0   disp1   mdp    vdec                   IPE      IPE
> > > 
> > > All the connections are HW fixed, SW can NOT adjust it.
> > > 
> > > mt8192 M4U support 0~16GB iova range. we preassign different engines
> > > into different iova ranges:
> > > 
> > > domain-id  module     iova-range                  larbs
> > >    0       disp        0 ~ 4G                      larb0/1
> > >    1       vcodec      4G ~ 8G                     larb4/5/7
> > >    2       cam/mdp     8G ~ 12G             larb2/9/11/13/14/16/17/18/19/20
> > >    3       CCU0    0x4000_0000 ~ 0x43ff_ffff     larb13: port 9/10
> > >    4       CCU1    0x4400_0000 ~ 0x47ff_ffff     larb14: port 4/5
> > > 
> > > The iova range for CCU0/1(camera control unit) is HW requirement.
> > > 
> > > Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > > ---
> > >  .../bindings/iommu/mediatek,iommu.yaml        |   9 +-
> > >  .../mediatek,smi-common.yaml                  |   5 +-
> > >  .../memory-controllers/mediatek,smi-larb.yaml |   3 +-
> > >  include/dt-bindings/memory/mt8192-larb-port.h | 239 ++++++++++++++++++
> > >  4 files changed, 251 insertions(+), 5 deletions(-)
> > >  create mode 100644 include/dt-bindings/memory/mt8192-larb-port.h
> > 
> > I see it depends on previous patches but does it have to be within one
> > commit? Is it not bisectable? The memory changes/bindings could go via
> > memory tree if this is split.
> 
> Thanks for the view.
> 
> I can split this into two patchset in next version, one is for iommu and
> the other is for smi.
> 
> Only the patch [18/24] change both the code(iommu and smi). I don't plan
> to split it, and the smi patch[24/24] don't depend on it(won't
> conflict).

It got too late in the cycle, so I am not going to take the 24/24 now.

> 
> since 18/24 also touch the smi code, I expect it could get Acked-by from
> you or Matthias, then Joerg could take it.

Sure. I acked it.

Best regards,
Krzysztof