Re: [PATCH v2] mtd: spi-nor: Fix address width on flash chips > 16MB

[Joel Stanley]

On Sun, 4 Oct 2020 at 21:33, Bert Vermeulen <bert@xxxxxxxx> wrote:
>
> If a flash chip has more than 16MB capacity but its BFPT reports
> BFPT_DWORD1_ADDRESS_BYTES_3_OR_4, the spi-nor framework defaults to 3.
>
> The check in spi_nor_set_addr_width() doesn't catch it because addr_width
> did get set. This fixes that check.
>
> Signed-off-by: Bert Vermeulen <bert@xxxxxxxx>

After replying to the other thread, I just saw this one.

Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
Tested-by: Joel Stanley <joel@xxxxxxxxx>

Thanks Bert!

Cheers,

Joel

> ---
>  drivers/mtd/spi-nor/core.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 0369d98b2d12..a2c35ad9645c 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -3009,13 +3009,15 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
>                 /* already configured from SFDP */
>         } else if (nor->info->addr_width) {
>                 nor->addr_width = nor->info->addr_width;
> -       } else if (nor->mtd.size > 0x1000000) {
> -               /* enable 4-byte addressing if the device exceeds 16MiB */
> -               nor->addr_width = 4;
>         } else {
>                 nor->addr_width = 3;
>         }
>
> +       if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
> +               /* enable 4-byte addressing if the device exceeds 16MiB */
> +               nor->addr_width = 4;
> +       }
> +
>         if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
>                 dev_dbg(nor->dev, "address width is too large: %u\n",
>                         nor->addr_width);
> --
> 2.17.1
>