Re: [PATCH v8 0/5] arm: dts: add and modify device node in NPCM7xx device tree

[Joel Stanley]

Hi Arm/SoC maintainers,

On Tue, 29 Sep 2020 at 13:18, Tomer Maimon <tmaimon77@xxxxxxxxx> wrote:
>
> This patch set adds and modify device tree nodes in the NPCM7xx
> Baseboard Management Controller (BMC) device tree.

This series has been reviewed by myself and we would like to see it
merged for 5.10.

Tomer isn't set up to send pull requests himself at this stage, so I
can send you a pull request (and perhaps continue doing so in the
future, as the "BMC maintainer"). Alternatively if you could merge
this series directly that would be appreciated.

Let me know what you would prefer.

Cheers,

Joel

>
> The following device node add:
>         - NPCM7xx Pin controller and GPIO
>         - NPCM7xx PWM and FAN.
>         - NPCM7xx EHCI USB.
>         - NPCM7xx KCS.
>         - NPCM Reset.
>         - NPCM Peripheral SPI.
>         - NPCM FIU SPI.
>         - NPCM HWRNG.
>         - NPCM I2C.
>         - STMicro STMMAC.
>
> The following device node modified:
>         - NPCM7xx timer.
>         - NPCM7xx clock constants parameters.
>
> NPCM7xx device tree tested on NPCM750 evaluation board.
>
> Changes since version 7:
> Address comments from Joel Stanely: https://www.spinics.net/lists/devicetree/msg380191.html
>
> Changes since version 6:
> Split commits.
>
> Changes since version 5:
> Address comments from Joel Stanely: https://lkml.org/lkml/2020/9/16/994
>
> Changes since version 4:
>  - Tested patches in Linux kernel 5.9.
>
> Changes since version 3:
>  - Tested patches in Linux kernel 5.6.
>
> Changes since version 2:
>  - Remove unnecessary output-enable flags.
>
> Changes since version 1:
>  - Add NPCM reset device node.
>  - Add reset parameters to NPCM driver device nodes.
>
>
> Tomer Maimon (5):
>   arm: dts: modify NPCM7xx device tree clock parameter
>   arm: dts: modify NPCM7xx device tree timer register size
>   arm: dts: add pinctrl and GPIO node to NPCM7XX device tree
>   arm: dts: add new device nodes to NPCM7XX device tree
>   arm: dts: add new device nodes to NPCM750 device tree EVB
>
>  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 967 +++++++++++++++++-
>  arch/arm/boot/dts/nuvoton-npcm750-evb.dts     | 367 ++++++-
>  .../boot/dts/nuvoton-npcm750-pincfg-evb.dtsi  | 157 +++
>  arch/arm/boot/dts/nuvoton-npcm750.dtsi        |  24 +-
>  4 files changed, 1495 insertions(+), 20 deletions(-)
>  create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
>
> --
> 2.22.0
>