[PATCH 1/3] thermal: power_allocator: respect upper and lower bounds for cooling device

[Lukasz Luba]

The thermal cooling device specified in DT might be instantiated for
a thermal zone trip point with a limited set of OPPs to operate on. This
configuration should be supported by Intelligent Power Allocation (IPA),
since it is a standard for other governors. Change the code and allow IPA
to get power value of lower and upper bound set for a given cooling
device.

Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx>
---
 drivers/thermal/gov_power_allocator.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index dd59085f38f5..f9ee7787b325 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -96,7 +96,8 @@ static u32 estimate_sustainable_power(struct thermal_zone_device *tz)
 		if (instance->trip != params->trip_max_desired_temperature)
 			continue;
 
-		if (power_actor_get_min_power(cdev, tz, &min_power))
+		if (cdev->ops->state2power(cdev, tz, instance->upper,
+					   &min_power))
 			continue;
 
 		sustainable_power += min_power;
@@ -404,7 +405,8 @@ static int allocate_power(struct thermal_zone_device *tz,
 
 		weighted_req_power[i] = frac_to_int(weight * req_power[i]);
 
-		if (power_actor_get_max_power(cdev, tz, &max_power[i]))
+		if (cdev->ops->state2power(cdev, tz, instance->lower,
+					   &max_power[i]))
 			continue;
 
 		total_req_power += req_power[i];
-- 
2.17.1