[PATCH v10 05/15] dt-bindings: connector: Add property to set initial current cap for FRS

From: Badhri Jagan Sridharan
Date: Thu Oct 08 2020 - 02:16:22 EST


This change adds frs-typec-current which allows setting the initial current
capability of the new source when vSafe5V is applied during PD3.0
sink Fast Role Swap.

Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
---
Changes since v1:
- Changing patch version to v6 to fix version number confusion.

Changes since v6:
- Removed the redundant usb-connector.txt that I created by mistake.
- Moved to yaml.

Changes since v7:
- Rebase

Changes since v8:
- Redefine new-source-frs-typec-current as string enums to address
Rob Herring's comment.

Changes since v9:
- Removed FRS constants from usb bindings.
---
.../bindings/connector/usb-connector.yaml | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 9bd52e63c935..d9f65e81065e 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -142,6 +142,32 @@ properties:
required:
- port@0

+ new-source-frs-typec-current:
+ description: Initial current capability of the new source when vSafe5V
+ is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
+ of "USB Power Delivery Specification Revision 3.0, Version 1.2" provides the
+ different power levels and "6.4.1.3.1.6 Fast Role Swap USB Type-C Current"
+ provides a detailed description of the field. The sink PDO from current source
+ reflects the current source's(i.e. transmitter of the FRS signal) power
+ requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
+ a.k.a new source, should check if it will be able to satisfy the current source's,
+ new sink's, requirement during frswap before enabling the frs signal reception.
+ This property refers to maximum current capability that the current sink can
+ satisfy. During FRS, VBUS voltage is at 5V, as the partners are in implicit
+ contract, hence, the power level is only a function of the current capability.
+ "not-supported" implies sink to source fast role swap not supported.
+ "default" refers to default USB power level as described by
+ "Table 6-14 Fixed Supply PDO - Sink".
+ "1.5A" refers to 1.5A@5V.
+ "3.0A" refers to 3.0A@5V.
+
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - not-supported
+ - default
+ - 1.5A
+ - 3.0A
+
required:
- compatible

--
2.28.0.806.g8561365e88-goog