[PATCH V2] arm64: dts imx8mn: Remove non-existent USB OTG2

[Adam Ford]

According to the i.MX8MN TRM, there is only one OTG port.  The
address for OTG2 is reserved on Nano.

This patch removes the non-existent OTG2, usbphynop2, and the usbmisc2
nodes.

Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support")

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
---
V2:  Remove usbmisc2 and usbphynop2 in addition to the otg2 node.

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 746faf1cf2fb..16c7202885d7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -790,28 +790,6 @@ usbmisc1: usbmisc@32e40200 {
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
-
-			usbotg2: usb@32e50000 {
-				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
-				reg = <0x32e50000 0x200>;
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
-						  <&clk IMX8MN_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
-							 <&clk IMX8MN_SYS_PLL1_100M>;
-				fsl,usbphy = <&usbphynop2>;
-				fsl,usbmisc = <&usbmisc2 0>;
-				status = "disabled";
-			};
-
-			usbmisc2: usbmisc@32e50200 {
-				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
-				#index-cells = <1>;
-				reg = <0x32e50200 0x200>;
-			};
-
 		};
 
 		dma_apbh: dma-controller@33000000 {
@@ -876,12 +854,4 @@ usbphynop1: usbphynop1 {
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
 	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
-		clock-names = "main_clk";
-	};
 };
-- 
2.25.1