Re: PCI: Race condition in pci_create_sysfs_dev_files

[Bjorn Helgaas]

On Wed, Oct 07, 2020 at 11:14:34AM -0500, Bjorn Helgaas wrote:
> On Wed, Oct 07, 2020 at 10:14:00AM +0200, Pali Rohár wrote:
> > On Wednesday 07 October 2020 12:47:40 Oliver O'Halloran wrote:
> > > On Wed, Oct 7, 2020 at 10:26 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > > >
> > > > I'm not really a fan of this because pci_sysfs_init() is a bit of a
> > > > hack to begin with, and this makes it even more complicated.
> > > >
> > > > It's not obvious from the code why we need pci_sysfs_init(), but
> > > > Yinghai hinted [1] that we need to create sysfs after assigning
> > > > resources.  I experimented by removing pci_sysfs_init() and skipping
> > > > the ROM BAR sizing.  In that case, we create sysfs files in
> > > > pci_bus_add_device() and later assign space for the ROM BAR, so we
> > > > fail to create the "rom" sysfs file.
> > > >
> > > > The current solution to that is to delay the sysfs files until
> > > > pci_sysfs_init(), a late_initcall(), which runs after resource
> > > > assignments.  But I think it would be better if we could create the
> > > > sysfs file when we assign the BAR.  Then we could get rid of the
> > > > late_initcall() and that implicit ordering requirement.
> > > 
> > > You could probably fix that by using an attribute_group to control
> > > whether the attribute shows up in sysfs or not. The .is_visible() for
> > > the group can look at the current state of the device and hide the rom
> > > attribute if the BAR isn't assigned or doesn't exist. That way we
> > > don't need to care when the actual assignment occurs.
> > 
> > And cannot we just return e.g. -ENODATA (or other error code) for those
> > problematic sysfs nodes until late_initcall() is called?
> 
> I really like Oliver's idea and I think we should push on that to see
> if it can be made to work.  If so, we can remove the late_initcall()
> completely.
> 
> > > > But I haven't tried to code it up, so it's probably more complicated
> > > > than this.  I guess ideally we would assign all the resources before
> > > > pci_bus_add_device().  If we could do that, we could just remove
> > > > pci_sysfs_init() and everything would just work, but I think that's a
> > > > HUGE can of worms.
> > > 
> > > I was under the impression the whole point of pci_bus_add_device() was
> > > to handle any initialisation that needed to be done after resources
> > > were assigned. Is the ROM BAR being potentially unassigned an x86ism
> > > or is there some bigger point I'm missing?
> 
> We can't assign resources for each device as we enumerate it because
> we don't know what's in use by other devices yet to be enumerated.
> That part is generic, not x86-specific.
> 
> The part that is x86-specific (or at least specific to systems using
> ACPI) is that the ACPI core doesn't reserve resources used by ACPI
> devices.  Sometimes those resources are included in the PCI host
> bridge windows, and we don't want to assign them to PCI devices.
> 
> I didn't trace this all the way, but the pcibios_assign_resources()
> and pnp_system_init() comments look relevant.  It's a little concerning
> that they're both fs_initcalls() and the ordering looks important, but
> it would only be by accident of link ordering that pnp_system_init()
> happens first.

Pali, what's your thought on this?  Do you plan to work on this
yourself?  If not and if you can live with your workaround a while
longer, I think Krzysztof might be interested in taking a crack at it.
I would just hate to see you guys duplicate each others' work :)

Bjorn