[tip: locking/core] bitops, kcsan: Partially revert instrumentation for non-atomic bitops

[tip-bot2 for Marco Elver]

The following commit has been merged into the locking/core branch of tip:

Commit-ID:     068df05363b79f54241bd6bd612055b8c16c5964
Gitweb:        https://git.kernel.org/tip/068df05363b79f54241bd6bd612055b8c16c5964
Author:        Marco Elver <elver@xxxxxxxxxx>
AuthorDate:    Thu, 13 Aug 2020 18:38:59 +02:00
Committer:     Paul E. McKenney <paulmck@xxxxxxxxxx>
CommitterDate: Mon, 24 Aug 2020 15:10:24 -07:00

bitops, kcsan: Partially revert instrumentation for non-atomic bitops

Previous to the change to distinguish read-write accesses, when
CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y is set, KCSAN would consider
the non-atomic bitops as atomic. We want to partially revert to this
behaviour, but with one important distinction: report racing
modifications, since lost bits due to non-atomicity are certainly
possible.

Given the operations here only modify a single bit, assuming
non-atomicity of the writer is sufficient may be reasonable for certain
usage (and follows the permissible nature of the "assume plain writes
atomic" rule). In other words:

	1. We want non-atomic read-modify-write races to be reported;
	   this is accomplished by kcsan_check_read(), where any
	   concurrent write (atomic or not) will generate a report.

	2. We do not want to report races with marked readers, but -do-
	   want to report races with unmarked readers; this is
	   accomplished by the instrument_write() ("assume atomic
	   write" with Kconfig option set).

With the above rules, when KCSAN_ASSUME_PLAIN_WRITES_ATOMIC is selected,
it is hoped that KCSAN's reporting behaviour is better aligned with
current expected permissible usage for non-atomic bitops.

Note that, a side-effect of not telling KCSAN that the accesses are
read-writes, is that this information is not displayed in the access
summary in the report. It is, however, visible in inline-expanded stack
traces. For now, it does not make sense to introduce yet another special
case to KCSAN's runtime, only to cater to the case here.

Cc: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
Cc: Paul E. McKenney <paulmck@xxxxxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Daniel Axtens <dja@xxxxxxxxxx>
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: <linux-arch@xxxxxxxxxxxxxxx>
Signed-off-by: Marco Elver <elver@xxxxxxxxxx>
Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
---
 include/asm-generic/bitops/instrumented-non-atomic.h | 30 +++++++++--
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/include/asm-generic/bitops/instrumented-non-atomic.h b/include/asm-generic/bitops/instrumented-non-atomic.h
index f86234c..37363d5 100644
--- a/include/asm-generic/bitops/instrumented-non-atomic.h
+++ b/include/asm-generic/bitops/instrumented-non-atomic.h
@@ -58,6 +58,30 @@ static inline void __change_bit(long nr, volatile unsigned long *addr)
 	arch___change_bit(nr, addr);
 }
 
+static inline void __instrument_read_write_bitop(long nr, volatile unsigned long *addr)
+{
+	if (IS_ENABLED(CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC)) {
+		/*
+		 * We treat non-atomic read-write bitops a little more special.
+		 * Given the operations here only modify a single bit, assuming
+		 * non-atomicity of the writer is sufficient may be reasonable
+		 * for certain usage (and follows the permissible nature of the
+		 * assume-plain-writes-atomic rule):
+		 * 1. report read-modify-write races -> check read;
+		 * 2. do not report races with marked readers, but do report
+		 *    races with unmarked readers -> check "atomic" write.
+		 */
+		kcsan_check_read(addr + BIT_WORD(nr), sizeof(long));
+		/*
+		 * Use generic write instrumentation, in case other sanitizers
+		 * or tools are enabled alongside KCSAN.
+		 */
+		instrument_write(addr + BIT_WORD(nr), sizeof(long));
+	} else {
+		instrument_read_write(addr + BIT_WORD(nr), sizeof(long));
+	}
+}
+
 /**
  * __test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
@@ -68,7 +92,7 @@ static inline void __change_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool __test_and_set_bit(long nr, volatile unsigned long *addr)
 {
-	instrument_read_write(addr + BIT_WORD(nr), sizeof(long));
+	__instrument_read_write_bitop(nr, addr);
 	return arch___test_and_set_bit(nr, addr);
 }
 
@@ -82,7 +106,7 @@ static inline bool __test_and_set_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool __test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
-	instrument_read_write(addr + BIT_WORD(nr), sizeof(long));
+	__instrument_read_write_bitop(nr, addr);
 	return arch___test_and_clear_bit(nr, addr);
 }
 
@@ -96,7 +120,7 @@ static inline bool __test_and_clear_bit(long nr, volatile unsigned long *addr)
  */
 static inline bool __test_and_change_bit(long nr, volatile unsigned long *addr)
 {
-	instrument_read_write(addr + BIT_WORD(nr), sizeof(long));
+	__instrument_read_write_bitop(nr, addr);
 	return arch___test_and_change_bit(nr, addr);
 }