Re: [PATCH net-next v4 07/10] bridge: cfm: Netlink SET configuration Interface.
From: Nikolay Aleksandrov
Date: Fri Oct 09 2020 - 17:53:34 EST
On Fri, 2020-10-09 at 14:35 +0000, Henrik Bjoernlund wrote:
> This is the implementation of CFM netlink configuration
> set information interface.
>
> Add new nested netlink attributes. These attributes are used by the
> user space to create/delete/configure CFM instances.
>
> SETLINK:
> IFLA_BRIDGE_CFM:
> Indicate that the following attributes are CFM.
>
> IFLA_BRIDGE_CFM_MEP_CREATE:
> This indicate that a MEP instance must be created.
> IFLA_BRIDGE_CFM_MEP_DELETE:
> This indicate that a MEP instance must be deleted.
> IFLA_BRIDGE_CFM_MEP_CONFIG:
> This indicate that a MEP instance must be configured.
> IFLA_BRIDGE_CFM_CC_CONFIG:
> This indicate that a MEP instance Continuity Check (CC)
> functionality must be configured.
> IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD:
> This indicate that a CC Peer MEP must be added.
> IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE:
> This indicate that a CC Peer MEP must be removed.
> IFLA_BRIDGE_CFM_CC_CCM_TX:
> This indicate that the CC transmitted CCM PDU must be configured.
> IFLA_BRIDGE_CFM_CC_RDI:
> This indicate that the CC transmitted CCM PDU RDI must be
> configured.
>
> CFM nested attribute has the following attributes in next level.
>
> SETLINK RTEXT_FILTER_CFM_CONFIG:
> IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
> The created MEP instance number.
> The type is u32.
> IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
> The created MEP domain.
> The type is u32 (br_cfm_domain).
> It must be BR_CFM_PORT.
> This means that CFM frames are transmitted and received
> directly on the port - untagged. Not in a VLAN.
> IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
> The created MEP direction.
> The type is u32 (br_cfm_mep_direction).
> It must be BR_CFM_MEP_DIRECTION_DOWN.
> This means that CFM frames are transmitted and received on
> the port. Not in the bridge.
> IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
> The created MEP residence port ifindex.
> The type is u32 (ifindex).
>
> IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
> The deleted MEP instance number.
> The type is u32.
>
> IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
> The configured MEP instance number.
> The type is u32.
> IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
> The configured MEP unicast MAC address.
> The type is 6*u8 (array).
> This is used as SMAC in all transmitted CFM frames.
> IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
> The configured MEP unicast MD level.
> The type is u32.
> It must be in the range 1-7.
> No CFM frames are passing through this MEP on lower levels.
> IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
> The configured MEP ID.
> The type is u32.
> It must be in the range 0-0x1FFF.
> This MEP ID is inserted in any transmitted CCM frame.
>
> IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
> The configured MEP instance number.
> The type is u32.
> IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
> The Continuity Check (CC) functionality is enabled or disabled.
> The type is u32 (bool).
> IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
> The CC expected receive interval of CCM frames.
> The type is u32 (br_cfm_ccm_interval).
> This is also the transmission interval of CCM frames when enabled.
> IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
> The CC expected receive MAID in CCM frames.
> The type is CFM_MAID_LENGTH*u8.
> This is MAID is also inserted in transmitted CCM frames.
>
> IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
> The configured MEP instance number.
> The type is u32.
> IFLA_BRIDGE_CFM_CC_PEER_MEPID:
> The CC Peer MEP ID added.
> The type is u32.
> When a Peer MEP ID is added and CC is enabled it is expected to
> receive CCM frames from that Peer MEP.
>
> IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
> The configured MEP instance number.
> The type is u32.
> IFLA_BRIDGE_CFM_CC_RDI_RDI:
> The RDI that is inserted in transmitted CCM PDU.
> The type is u32 (bool).
>
> IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
> The configured MEP instance number.
> The type is u32.
> IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
> The transmitted CCM frame destination MAC address.
> The type is 6*u8 (array).
> This is used as DMAC in all transmitted CFM frames.
> IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
> The transmitted CCM frame update (increment) of sequence
> number is enabled or disabled.
> The type is u32 (bool).
> IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
> The period of time where CCM frame are transmitted.
> The type is u32.
> The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
> must be done before timeout to keep transmission alive.
> When period is zero any ongoing CCM frame transmission
> will be stopped.
> IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
> The transmitted CCM frame update with Interface Status TLV
> is enabled or disabled.
> The type is u32 (bool).
> IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
> The transmitted Interface Status TLV value field.
> The type is u8.
> IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
> The transmitted CCM frame update with Port Status TLV is enabled
> or disabled.
> The type is u32 (bool).
> IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
> The transmitted Port Status TLV value field.
> The type is u8.
>
> Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@xxxxxxxxxxxxx>
> Reviewed-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> ---
> include/uapi/linux/if_bridge.h | 90 +++++++
> include/uapi/linux/rtnetlink.h | 1 +
> net/bridge/Makefile | 2 +-
> net/bridge/br_cfm.c | 5 +
> net/bridge/br_cfm_netlink.c | 458 +++++++++++++++++++++++++++++++++
> net/bridge/br_netlink.c | 5 +
> net/bridge/br_private.h | 17 +-
> 7 files changed, 576 insertions(+), 2 deletions(-)
> create mode 100644 net/bridge/br_cfm_netlink.c
>
Acked-by: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>