[PATCH v2 1/1] PCI/ERR: don't clobber status after reset_link()

From: Hedi Berriche
Date: Fri Oct 09 2020 - 20:22:14 EST


Commit 6d2c89441571 ("PCI/ERR: Update error status after reset_link()")
broke pcie_do_recovery(): updating status after reset_link() has the ill
side effect of causing recovery to fail if the error status is
PCI_ERS_RESULT_CAN_RECOVER or PCI_ERS_RESULT_NEED_RESET as the following
code will *never* run in the case of a successful reset_link()

177 if (status == PCI_ERS_RESULT_CAN_RECOVER) {
...
181 }

183 if (status == PCI_ERS_RESULT_NEED_RESET) {
...
192 }

For instance in the case of PCI_ERS_RESULT_NEED_RESET we end up not
calling ->slot_reset() (because we skip report_slot_reset()) thus
breaking driver (re)initialisation.

Don't clobber status after reset_link(), use a boolean instead to track
the outcome of reset_link().

Fixes: 6d2c89441571 ("PCI/ERR: Update error status after reset_link()")
Signed-off-by: Hedi Berriche <hedi.berriche@xxxxxxx>
Cc: Russ Anderson <rja@xxxxxxx>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Ashok Raj <ashok.raj@xxxxxxxxx>
Cc: Joerg Roedel <jroedel@xxxxxxxx>

Cc: stable@xxxxxxxxxx # v5.7+
---
drivers/pci/pcie/err.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index c543f419d8f9..b4bfa87fc49d 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -152,6 +152,7 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
{
pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
struct pci_bus *bus;
+ bool reset_failed = false;

/*
* Error recovery runs on all subordinates of the first downstream port.
@@ -165,8 +166,8 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
pci_dbg(dev, "broadcast error_detected message\n");
if (state == pci_channel_io_frozen) {
pci_walk_bus(bus, report_frozen_detected, &status);
- status = reset_link(dev);
- if (status != PCI_ERS_RESULT_RECOVERED) {
+ reset_failed = (reset_link(dev) != PCI_ERS_RESULT_RECOVERED);
+ if (reset_failed) {
pci_warn(dev, "link reset failed\n");
goto failed;
}
@@ -174,6 +175,12 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
pci_walk_bus(bus, report_normal_detected, &status);
}

+ if ((status == PCI_ERS_RESULT_DISCONNECT ||
+ status == PCI_ERS_RESULT_NO_AER_DRIVER) &&
+ !reset_failed) {
+ status = PCI_ERS_RESULT_RECOVERED;
+ }
+
if (status == PCI_ERS_RESULT_CAN_RECOVER) {
status = PCI_ERS_RESULT_RECOVERED;
pci_dbg(dev, "broadcast mmio_enabled message\n");
--
2.28.0