Re: [PATCH v2] net: usb: rtl8150: don't incorrectly assign random MAC addresses
From: Petko Manolov
Date: Sun Oct 11 2020 - 15:31:39 EST
On 20-10-11 11:33:00, Joe Perches wrote:
> On Sun, 2020-10-11 at 10:59 -0700, Jakub Kicinski wrote:
> > On Sun, 11 Oct 2020 23:00:30 +0530 Anant Thazhemadam wrote:
> > > In set_ethernet_addr(), if get_registers() succeeds, the ethernet address
> > > that was read must be copied over. Otherwise, a random ethernet address
> > > must be assigned.
> > >
> > > get_registers() returns 0 if successful, and negative error number
> > > otherwise. However, in set_ethernet_addr(), this return value is
> > > incorrectly checked.
> > >
> > > Since this return value will never be equal to sizeof(node_id), a
> > > random MAC address will always be generated and assigned to the
> > > device; even in cases when get_registers() is successful.
> > >
> > > Correctly modifying the condition that checks if get_registers() was
> > > successful or not fixes this problem, and copies the ethernet address
> > > appropriately.
>
> There are many unchecked uses of set_registers and get_registers
> in this file.
>
> If failures are really expected, then it might be better to fix
> them up too.
Checking the return value of each get/set_registers() is going to be a PITA and
not very helpful. Doing so when setting the MAC address _does_ make sense as in
that case it is not a hard error.
In almost all other occasions if usb_control_msg_send/recv() return an error i'd
rather dump an error message (from within get/set_registers()) and let the user
decide whether to get rid of this adapter or start debugging it.
cheers,
Petko
> $ git grep -w '[gs]et_registers' drivers/net/usb/rtl8150.c
> drivers/net/usb/rtl8150.c:static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
> drivers/net/usb/rtl8150.c:static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data)
> drivers/net/usb/rtl8150.c: set_registers(dev, PHYADD, sizeof(data), data);
> drivers/net/usb/rtl8150.c: set_registers(dev, PHYCNT, 1, &tmp);
> drivers/net/usb/rtl8150.c: get_registers(dev, PHYCNT, 1, data);
> drivers/net/usb/rtl8150.c: get_registers(dev, PHYDAT, 2, data);
> drivers/net/usb/rtl8150.c: set_registers(dev, PHYADD, sizeof(data), data);
> drivers/net/usb/rtl8150.c: set_registers(dev, PHYCNT, 1, &tmp);
> drivers/net/usb/rtl8150.c: get_registers(dev, PHYCNT, 1, data);
> drivers/net/usb/rtl8150.c: ret = get_registers(dev, IDR, sizeof(node_id), node_id);
> drivers/net/usb/rtl8150.c: set_registers(dev, IDR, netdev->addr_len, netdev->dev_addr);
> drivers/net/usb/rtl8150.c: get_registers(dev, CR, 1, &cr);
> drivers/net/usb/rtl8150.c: set_registers(dev, CR, 1, &cr);
> drivers/net/usb/rtl8150.c: set_registers(dev, IDR_EEPROM + (i * 2), 2,
> drivers/net/usb/rtl8150.c: set_registers(dev, CR, 1, &cr);
> drivers/net/usb/rtl8150.c: set_registers(dev, CR, 1, &data);
> drivers/net/usb/rtl8150.c: get_registers(dev, CR, 1, &data);
> drivers/net/usb/rtl8150.c: set_registers(dev, RCR, 1, &rcr);
> drivers/net/usb/rtl8150.c: set_registers(dev, TCR, 1, &tcr);
> drivers/net/usb/rtl8150.c: set_registers(dev, CR, 1, &cr);
> drivers/net/usb/rtl8150.c: get_registers(dev, MSR, 1, &msr);
> drivers/net/usb/rtl8150.c: get_registers(dev, CR, 1, &cr);
> drivers/net/usb/rtl8150.c: set_registers(dev, CR, 1, &cr);
> drivers/net/usb/rtl8150.c: get_registers(dev, CSCR, 2, &tmp);
> drivers/net/usb/rtl8150.c: set_registers(dev, IDR, 6, netdev->dev_addr);
> drivers/net/usb/rtl8150.c: get_registers(dev, BMCR, 2, &bmcr);
> drivers/net/usb/rtl8150.c: get_registers(dev, ANLP, 2, &lpa);
>
>
>