[PATCH 03/11] arm64: dts: hisilicon: write the values of property-units into a uint32 array

[Zhen Lei]

Use <> to separate the values of property-units will be treated as
multiple arrays. The errors similar to the following will be reported by
property-units.yaml.

ufs@ff3c0000: freq-table-hz: [[0, 0], [0, 0]] is too long

Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi      | 3 ++-
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi      | 3 ++-
 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 9 ++++-----
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 994140fbc916eea..3f6b1715835af06 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1045,7 +1045,8 @@
 			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
 				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
 			clock-names = "ref_clk", "phy_clk";
-			freq-table-hz = <0 0>, <0 0>;
+			freq-table-hz = <0 0
+					 0 0>;
 			/* offset: 0x84; bit: 12 */
 			resets = <&crg_rst 0x84 12>;
 			reset-names = "rst";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 2dcffa3ed2189eb..668977d1acba94c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -667,7 +667,8 @@
 			clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
 				<&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
 			clock-names = "ref_clk", "phy_clk";
-			freq-table-hz = <0 0>, <0 0>;
+			freq-table-hz = <0 0
+					 0 0>;
 			/* offset: 0x84; bit: 12 */
 			resets = <&crg_rst 0x84 12>;
 			reset-names = "rst";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 12bc1d3ed4243f5..993998ac27c503c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -91,11 +91,10 @@
 			gmacphyrst: reset-controller {
 				compatible = "ti,syscon-reset";
 				#reset-cells = <1>;
-				ti,reset-bits =
-					<0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
-					 DEASSERT_SET|STATUS_NONE)>,
-					<0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
-					 DEASSERT_SET|STATUS_NONE)>;
+				ti,reset-bits = <
+					0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+					0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+				>;
 			};
 		};
 
-- 
1.8.3