[PATCH 5.4 42/85] i2c: owl: Clear NACK and BUS error bits

[Greg Kroah-Hartman]

From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>

commit f5b3f433641c543ebe5171285a42aa6adcdb2d22 upstream.

When the NACK and BUS error bits are set by the hardware, the driver is
responsible for clearing them by writing "1" into the corresponding
status registers.

Hence perform the necessary operations in owl_i2c_interrupt().

Fixes: d211e62af466 ("i2c: Add Actions Semiconductor Owl family S900 I2C driver")
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/i2c/busses/i2c-owl.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -179,6 +179,9 @@ static irqreturn_t owl_i2c_interrupt(int
 	fifostat = readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT);
 	if (fifostat & OWL_I2C_FIFOSTAT_RNB) {
 		i2c_dev->err = -ENXIO;
+		/* Clear NACK error bit by writing "1" */
+		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
+				   OWL_I2C_FIFOSTAT_RNB, true);
 		goto stop;
 	}
 
@@ -186,6 +189,9 @@ static irqreturn_t owl_i2c_interrupt(int
 	stat = readl(i2c_dev->base + OWL_I2C_REG_STAT);
 	if (stat & OWL_I2C_STAT_BEB) {
 		i2c_dev->err = -EIO;
+		/* Clear BUS error bit by writing "1" */
+		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
+				   OWL_I2C_STAT_BEB, true);
 		goto stop;
 	}