On Wed, Oct 7, 2020 at 9:33 PM <vgarodia@xxxxxxxxxxxxxx> wrote:
Hi Tomasz,
On 2020-10-01 20:47, Tomasz Figa wrote:
> On Thu, Oct 1, 2020 at 3:32 AM Stanimir Varbanov
> <stanimir.varbanov@xxxxxxxxxx> wrote:
>>
>> Hi Tomasz,
>>
>> On 9/25/20 11:55 PM, Tomasz Figa wrote:
>> > Hi Dikshita, Stanimir,
>> >
>> > On Thu, Sep 24, 2020 at 7:31 PM Dikshita Agarwal
>> > <dikshita@xxxxxxxxxxxxxx> wrote:
>> >>
>> >> From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
>> >>
>> >> - return correct width and height for G_SELECTION
>> >> - if requested rectangle wxh doesn't match with capture port wxh
>> >> adjust the rectangle to supported wxh.
>> >>
>> >> Signed-off-by: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>
>> >> ---
>> >> drivers/media/platform/qcom/venus/venc.c | 20 ++++++++++++--------
>> >> 1 file changed, 12 insertions(+), 8 deletions(-)
>> >>
>> >> diff --git a/drivers/media/platform/qcom/venus/venc.c b/drivers/media/platform/qcom/venus/venc.c
>> >> index 7d2aaa8..a2cc12d 100644
>> >> --- a/drivers/media/platform/qcom/venus/venc.c
>> >> +++ b/drivers/media/platform/qcom/venus/venc.c
>> >> @@ -463,13 +463,13 @@ static int venc_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
>> >> switch (s->target) {
>> >> case V4L2_SEL_TGT_CROP_DEFAULT:
>> >> case V4L2_SEL_TGT_CROP_BOUNDS:
>> >> - s->r.width = inst->width;
>> >> - s->r.height = inst->height;
>> >> - break;
>> >> - case V4L2_SEL_TGT_CROP:
>> >> s->r.width = inst->out_width;
>> >> s->r.height = inst->out_height;
>> >> break;
>> >> + case V4L2_SEL_TGT_CROP:
>> >> + s->r.width = inst->width;
>> >> + s->r.height = inst->height;
>> >> + break;
>> >> default:
>> >> return -EINVAL;
>> >> }inter
>> >> @@ -490,10 +490,14 @@ static int venc_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
>> >>
>> >> switch (s->target) {
>> >> case V4L2_SEL_TGT_CROP:
>> >> - if (s->r.width != inst->out_width ||
>> >> - s->r.height != inst->out_height ||
>> >> - s->r.top != 0 || s->r.left != 0)
>> >> - return -EINVAL;
>> >> + if (s->r.width != inst->width ||
>> >> + s->r.height != inst->height ||
>> >> + s->r.top != 0 || s->r.left != 0) {
>> >> + s->r.top = 0;
>> >> + s->r.left = 0;
>> >> + s->r.width = inst->width;
>> >> + s->r.height = inst->height;
>> >
>> > What's the point of exposing the selection API if no selection can
>> > actually be done?
>>
>> If someone can guarantee that dropping of s_selection will not break
>> userspace applications I'm fine with removing it.
>
> Indeed the specification could be made more clear about this. The
> visible rectangle configuration is described as optional, so I'd
> consider the capability to be optional as well.
>
> Of course it doesn't change the fact that something that is optional
> in the API may be mandatory for some specific integrations, like
> Chrome OS or Android.
>
>>
>> I implemented g/s_selection with the idea to add crop functionality
>> later because with current firmware interface it needs more work.
>
> I suggested one thing internally, but not sure if it was understood
> correctly:
>
> Most of the encoders only support partial cropping, with the rectangle
> limited to top = 0 and left = 0, in other words, only setting the
> visible width and height. This can be easily implemented on most of
> the hardware, even those that don't have dedicated cropping
> capability, by configuring the hardware as follows:
>
> stride = CAPTURE format width (or bytesperline)
> width = CROP width
> height = CROP height
Assuming the bitstream height and width would be configured with capture
plane
setting (s_fmt), configuring the crop as height/width would indicate to
venus
hardware as scaling. To distinguish scaling with crop, firmware needs to
be
configured separately indicating crop rectangle.
The V4L2 encoder API does _not_ configure the bitstream width and
height currently. Scaling is not defined in the API at the moment. As
per the spec [1], the CAPTURE width and height fields are
ignored/read-only.
[1]
https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/dev-encoder.html#initialization
Currently there are following parameters configured by the V4L2 API:
OUTPUT format width: the number of pixels per line of the input
buffer, including any padding pixels, i.e. stride in pixels,
OUTPUT format height: the total number of lines of the input buffer.
including or not, any padding lines (for NV12 non-M format any padding
lines must be included, as plane offsets are calculated based on
this),
CROP left, width: horizontal position of valid pixel data in the
buffer; left is typically 0 and width can be less than OUTPUT format
width,
CROP top, height: vertical position of valid pixel data in the buffer:
top is typically 0 and height can be less than OUTPUT format height,
> I believe Android requires the hardware to support stride and AFAIK
> this hardware is also commonly used on Android, so perhaps it's
> possible to achieve the above without any firmware changes?
Yes, the hardware is used and also supported in android. The interface
to configure
crop rectangle to firmware is via extradata. This extradata info is
passed from v4l2
clients via a separate plane in v4l2 buffer. The extradata payload is
passed to
firmware as is and the firmware parses it to know if crop, roi, etc.
Okay, so do I get it correctly that without extradata, the firmware
can only handle the case where width == stride?
If so, it sounds like this extradata should be generated by the driverIIRC, Stan has done some experiments around the same. Would let him share his
internally based on the selection CROP rectangle. In fact, the driver
already seems to have a definition of struct hfi_extradata_input_crop
[2]. So perhaps it wouldn't require much effort to implement the crop
properly?
[2]
https://elixir.bootlin.com/linux/v5.9-rc8/source/drivers/media/platform/qcom/venus/hfi_helper.h#L817
Best regards,
Tomasz