Re: [PATCH 3/3] soc: qcom: geni: Optimize select fifo/dma mode

[Doug Anderson]

Hi,

On Fri, Oct 9, 2020 at 5:32 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Quoting Douglas Anderson (2020-10-08 15:52:35)
> > diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
> > index 751a49f6534f..746854745b15 100644
> > --- a/drivers/soc/qcom/qcom-geni-se.c
> > +++ b/drivers/soc/qcom/qcom-geni-se.c
> > @@ -266,49 +266,53 @@ EXPORT_SYMBOL(geni_se_init);
> >  static void geni_se_select_fifo_mode(struct geni_se *se)
> >  {
> >         u32 proto = geni_se_read_proto(se);
> > -       u32 val;
> > +       u32 val, val_old;
> >
> >         geni_se_irq_clear(se);
> >
> > -       val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
> >         if (proto != GENI_SE_UART) {
> > +               val_old = val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
> >                 val |= M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN;
> >                 val |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
> > -       }
> > -       writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
> > +               if (val != val_old)
> > +                       writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
> >
> > -       val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
> > -       if (proto != GENI_SE_UART)
> > -               val |= S_CMD_DONE_EN;
> > -       writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
> > +               val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
>
> Can we use the val_old trick here too?
>
> > +               if (!(val & S_CMD_DONE_EN))
> > +                       writel_relaxed(val | S_CMD_DONE_EN,
>
> Because this val | S_CMD_DONE_EN thing is just hard to read :/

This is done in v2.  Thanks for your review!

-Doug