[PATCH v5 0/5] arm64: Add framework to turn an IPI as NMI
From: Sumit Garg
Date: Wed Oct 14 2020 - 07:12:44 EST
With pseudo NMIs support available its possible to configure SGIs to be
triggered as pseudo NMIs running in NMI context. And kernel features
such as:
- NMI backtrace can leverage IPI turned as NMI to get a backtrace of CPU
stuck in hard lockup using magic SYSRQ.
- kgdb relies on NMI support to round up CPUs which are stuck in hard
lockup state with interrupts disabled.
This patch-set adds framework to turn an IPI as NMI which can be triggered
as a pseudo NMI which in turn invokes registered NMI handlers.
After this patch-set we should be able to get a backtrace for a CPU
stuck in HARDLOCKUP. Have a look at an examples below from a hard lockup
testcase run on Developerbox:
$ echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
NMI backtrace:
==============
# Issue Magic SysRq to dump backtrace
[ 376.894502] NMI backtrace for cpu 8
[ 376.894506] CPU: 8 PID: 555 Comm: bash Not tainted 5.9.0-rc3-00740-g06ff047-dirty #242
[ 376.894510] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #73 Apr 6 2020
[ 376.894514] pstate: 40000005 (nZcv daif -PAN -UAO BTYPE=--)
[ 376.894517] pc : lkdtm_HARDLOCKUP+0x8/0x18
[ 376.894520] lr : lkdtm_do_action+0x24/0x30
[ 376.894524] sp : ffff800012cebd20
[ 376.894527] pmr_save: 00000060
[ 376.894530] x29: ffff800012cebd20 x28: ffff000875ae8000
[ 376.894540] x27: 0000000000000000 x26: 0000000000000000
[ 376.894550] x25: 000000000000001a x24: ffff800012cebe40
[ 376.894560] x23: 000000000000000b x22: ffff800010fc5040
[ 376.894569] x21: ffff000878b61000 x20: ffff8000113b2870
[ 376.894579] x19: 000000000000001b x18: 0000000000000010
[ 376.894588] x17: 0000000000000000 x16: 0000000000000000
[ 376.894598] x15: ffff000875ae8470 x14: 00000000000002ad
[ 376.894613] x13: 0000000000000000 x12: 0000000000000000
[ 376.894622] x11: 0000000000000007 x10: 00000000000009c0
[ 376.894631] x9 : ffff800012ceba80 x8 : ffff000875ae8a20
[ 376.894641] x7 : ffff00087f6b3280 x6 : ffff00087f6b3200
[ 376.894651] x5 : 0000000000000000 x4 : ffff00087f6a91f8
[ 376.894660] x3 : ffff00087f6b0120 x2 : 1aa310cec69eb500
[ 376.894670] x1 : 0000000000000000 x0 : 0000000000000060
[ 376.894679] Call trace:
[ 376.894683] lkdtm_HARDLOCKUP+0x8/0x18
[ 376.894686] direct_entry+0x124/0x1c0
[ 376.894689] full_proxy_write+0x60/0xb0
[ 376.894693] vfs_write+0xf0/0x230
[ 376.894696] ksys_write+0x6c/0xf8
[ 376.894699] __arm64_sys_write+0x1c/0x28
[ 376.894703] el0_svc_common.constprop.0+0x74/0x1f0
[ 376.894707] do_el0_svc+0x24/0x90
[ 376.894710] el0_sync_handler+0x180/0x2f8
[ 376.894713] el0_sync+0x158/0x180
KGDB:
=====
# Enter kdb via Magic SysRq
[6]kdb> btc
btc: cpu status: Currently on cpu 6
Available cpus: 0-5(I), 6, 7(I), 8, 9-23(I)
<snip>
Stack traceback for pid 555
0xffff000875ae8000 555 554 1 8 R 0xffff000875ae89c0 bash
CPU: 8 PID: 555 Comm: bash Not tainted 5.9.0-rc3-00740-g06ff047-dirty #242
Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #73 Apr 6 2020
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x18/0x28
dump_stack+0xc0/0x11c
kgdb_cpu_enter+0x648/0x660
kgdb_nmicallback+0xa0/0xa8
ipi_kgdb_nmicallback+0x24/0x30
ipi_nmi_handler+0x48/0x60
handle_percpu_devid_fasteoi_ipi+0x74/0x88
generic_handle_irq+0x30/0x48
handle_domain_nmi+0x48/0x80
gic_handle_irq+0x18c/0x34c
el1_irq+0xcc/0x180
lkdtm_HARDLOCKUP+0x8/0x18
direct_entry+0x124/0x1c0
full_proxy_write+0x60/0xb0
vfs_write+0xf0/0x230
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
el0_svc_common.constprop.0+0x74/0x1f0
do_el0_svc+0x24/0x90
el0_sync_handler+0x180/0x2f8
el0_sync+0x158/0x180
<snip>
Changes in v5:
- Rebased to head of upstream master.
- Remove redundant invocation of ipi_nmi_setup().
- Addressed misc. comments.
Changes in v4:
- Move IPI NMI framework to a separate file.
- Get rid of hard-coded IPI_CALL_NMI_FUNC allocation.
- Add NMI backtrace support leveraged via magic SYSRQ.
Changes in v3:
- Rebased to Marc's latest IPIs patch-set [1].
[1] https://lkml.org/lkml/2020/9/1/603
Changes since RFC version [1]:
- Switch to use generic interrupt framework to turn an IPI as NMI.
- Dependent on Marc's patch-set [2] which turns IPIs into normal
interrupts.
- Addressed misc. comments from Doug on patch #4.
- Posted kgdb NMI printk() fixup separately which has evolved since
to be solved using different approach via changing kgdb interception
of printk() in common printk() code (see patch [3]).
[1] https://lkml.org/lkml/2020/4/24/328
[2] https://lkml.org/lkml/2020/5/19/710
[3] https://lkml.org/lkml/2020/5/20/418
Sumit Garg (5):
arm64: Add framework to turn IPI as NMI
irqchip/gic-v3: Enable support for SGIs to act as NMIs
arm64: smp: Allocate and setup IPI as NMI
arm64: kgdb: Round up cpus using IPI as NMI
arm64: ipi_nmi: Add support for NMI backtrace
arch/arm64/include/asm/irq.h | 6 +++
arch/arm64/include/asm/kgdb.h | 8 ++++
arch/arm64/include/asm/nmi.h | 16 ++++++++
arch/arm64/kernel/Makefile | 2 +-
arch/arm64/kernel/ipi_nmi.c | 90 +++++++++++++++++++++++++++++++++++++++++++
arch/arm64/kernel/kgdb.c | 21 ++++++++++
arch/arm64/kernel/smp.c | 8 ++++
drivers/irqchip/irq-gic-v3.c | 13 ++++++-
8 files changed, 161 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/include/asm/nmi.h
create mode 100644 arch/arm64/kernel/ipi_nmi.c
--
2.7.4