Linux 5.9: smartpqi: controller is offline: status code 0x6100c

[Paul Menzel]

Dear Linux folks,


With Linux 5.9 and


    $ lspci -nn -s 89:
    89:00.0 Serial Attached SCSI controller [0107]: Adaptec Smart 
Storage PQI 12G SAS/PCIe 3 [9005:028f] (rev 01)
    $ more 
/sys/devices/pci0000:88/0000:88:00.0/0000:89:00.0/host15/scsi_host/host15/driver_version
    1.2.8-026
    $ more 
/sys/devices/pci0000:88/0000:88:00.0/0000:89:00.0/host15/scsi_host/host15/firmware_version
    2.62-0

the controller went offline with status code 0x6100c.

> Oct 14 14:54:01 done.molgen.mpg.de kernel: smartpqi 0000:89:00.0: controller is offline: status code 0x6100c
> Oct 14 14:54:01 done.molgen.mpg.de kernel: smartpqi 0000:89:00.0: controller offline
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:2:0: [sdu] tag#709 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=6s
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:15:0: [sdah] tag#274 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=6s
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:4:0: [sdw] tag#516 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=6s
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:4:0: [sdw] tag#516 CDB: Write(10) 2a 00 0d e6 9e 88 00 00 01 00
> Oct 14 14:54:01 done.molgen.mpg.de kernel: blk_update_request: I/O error, dev sdw, sector 1865741376 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:0:0: [sds] tag#529 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=6s
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:0:0: [sds] tag#529 CDB: Write(10) 2a 00 29 4e e8 ff 00 00 01 00
> Oct 14 14:54:01 done.molgen.mpg.de kernel: blk_update_request: I/O error, dev sds, sector 5544298488 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:0:0: [sds] tag#627 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=6s
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:0:0: [sds] tag#627 CDB: Read(10) 28 00 5d df 2c 04 00 00 04 00
> Oct 14 14:54:01 done.molgen.mpg.de kernel: blk_update_request: I/O error, dev sds, sector 12599255072 op 0x0:(READ) flags 0x1000 phys_seg 1 prio class
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:5:0: [sdx] tag#567 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=6s
> Oct 14 14:54:01 done.molgen.mpg.de kernel: sd 15:0:5:0: [sdx] tag#567 CDB: Write(10) 2a 00 21 4e ce 04 00 00 04 00

How can the status code 0x6100c be deciphered?


Kind regards,

Paul