Re: [PATCH v3 12/15] phy: tegra: xusb: Add wake/sleepwalk for Tegra186
From: JC Kuo
Date: Thu Oct 15 2020 - 04:08:31 EST
I will amend accordingly and submit new patch.
Thanks for review.
JC
On 9/28/20 9:50 PM, Thierry Reding wrote:
> On Wed, Sep 09, 2020 at 04:10:38PM +0800, JC Kuo wrote:
>> This commit implements Tegra186/Tegra194 XUSB PADCTL/AO wake and
>> sleepwalk operations.
>>
>> Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
>> ---
>> v3:
>> move 'ao_regs' to the top of 'struct tegra186_xusb_padctl'
>> change return data of .phy_remote_wake_detected() to 'bool'
>> change input parameter of .phy_remote_wake_detected() to 'struct phy*'
>> remove unnecessary 'else'
>> rename 'val' with 'value'
>>
>> drivers/phy/tegra/xusb-tegra186.c | 626 ++++++++++++++++++++++++++++++
>> 1 file changed, 626 insertions(+)
>>
>> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
>> index 5d64f69b39a9..104e2a8496b4 100644
>> --- a/drivers/phy/tegra/xusb-tegra186.c
>> +++ b/drivers/phy/tegra/xusb-tegra186.c
>> @@ -113,6 +113,117 @@
>> #define ID_OVERRIDE_FLOATING ID_OVERRIDE(8)
>> #define ID_OVERRIDE_GROUNDED ID_OVERRIDE(0)
>>
>> +/* XUSB AO registers */
>> +#define XUSB_AO_USB_DEBOUNCE_DEL (0x4)
>> +#define UHSIC_LINE_DEB_CNT(x) (((x) & 0xf) << 4)
>> +#define UTMIP_LINE_DEB_CNT(x) ((x) & 0xf)
>> +
>> +#define XUSB_AO_UTMIP_TRIGGERS(x) (0x40 + (x) * 4)
>> +#define CLR_WALK_PTR (1 << 0)
>> +#define CAP_CFG (1 << 1)
>> +#define CLR_WAKE_ALARM (1 << 3)
>> +
>> +#define XUSB_AO_UHSIC_TRIGGERS(x) (0x60 + (x) * 4)
>> +#define HSIC_CLR_WALK_PTR (1 << 0)
>> +#define HSIC_CLR_WAKE_ALARM (1 << 3)
>> +#define HSIC_CAP_CFG (1 << 4)
>> +
>> +#define XUSB_AO_UTMIP_SAVED_STATE(x) (0x70 + (x) * 4)
>> +#define SPEED(x) ((x) & 0x3)
>> +#define UTMI_HS SPEED(0)
>> +#define UTMI_FS SPEED(1)
>> +#define UTMI_LS SPEED(2)
>> +#define UTMI_RST SPEED(3)
>> +
>> +#define XUSB_AO_UHSIC_SAVED_STATE(x) (0x90 + (x) * 4)
>> +#define MODE(x) ((x) & 0x1)
>> +#define MODE_HS MODE(0)
>> +#define MODE_RST MODE(1)
>> +
>> +#define XUSB_AO_UTMIP_SLEEPWALK_CFG(x) (0xd0 + (x) * 4)
>> +#define XUSB_AO_UHSIC_SLEEPWALK_CFG(x) (0xf0 + (x) * 4)
>> +#define FAKE_USBOP_VAL (1 << 0)
>> +#define FAKE_USBON_VAL (1 << 1)
>> +#define FAKE_USBOP_EN (1 << 2)
>> +#define FAKE_USBON_EN (1 << 3)
>> +#define FAKE_STROBE_VAL (1 << 0)
>> +#define FAKE_DATA_VAL (1 << 1)
>> +#define FAKE_STROBE_EN (1 << 2)
>> +#define FAKE_DATA_EN (1 << 3)
>> +#define WAKE_WALK_EN (1 << 14)
>> +#define MASTER_ENABLE (1 << 15)
>> +#define LINEVAL_WALK_EN (1 << 16)
>> +#define WAKE_VAL(x) (((x) & 0xf) << 17)
>> +#define WAKE_VAL_NONE WAKE_VAL(12)
>> +#define WAKE_VAL_ANY WAKE_VAL(15)
>> +#define WAKE_VAL_DS10 WAKE_VAL(2)
>> +#define LINE_WAKEUP_EN (1 << 21)
>> +#define MASTER_CFG_SEL (1 << 22)
>> +
>> +#define XUSB_AO_UTMIP_SLEEPWALK(x) (0x100 + (x) * 4)
>> +/* phase A */
>> +#define USBOP_RPD_A (1 << 0)
>> +#define USBON_RPD_A (1 << 1)
>> +#define AP_A (1 << 4)
>> +#define AN_A (1 << 5)
>> +#define HIGHZ_A (1 << 6)
>> +/* phase B */
>> +#define USBOP_RPD_B (1 << 8)
>> +#define USBON_RPD_B (1 << 9)
>> +#define AP_B (1 << 12)
>> +#define AN_B (1 << 13)
>> +#define HIGHZ_B (1 << 14)
>> +/* phase C */
>> +#define USBOP_RPD_C (1 << 16)
>> +#define USBON_RPD_C (1 << 17)
>> +#define AP_C (1 << 20)
>> +#define AN_C (1 << 21)
>> +#define HIGHZ_C (1 << 22)
>> +/* phase D */
>> +#define USBOP_RPD_D (1 << 24)
>> +#define USBON_RPD_D (1 << 25)
>> +#define AP_D (1 << 28)
>> +#define AN_D (1 << 29)
>> +#define HIGHZ_D (1 << 30)
>> +
>> +#define XUSB_AO_UHSIC_SLEEPWALK(x) (0x120 + (x) * 4)
>> +/* phase A */
>> +#define RPD_STROBE_A (1 << 0)
>> +#define RPD_DATA0_A (1 << 1)
>> +#define RPU_STROBE_A (1 << 2)
>> +#define RPU_DATA0_A (1 << 3)
>> +/* phase B */
>> +#define RPD_STROBE_B (1 << 8)
>> +#define RPD_DATA0_B (1 << 9)
>> +#define RPU_STROBE_B (1 << 10)
>> +#define RPU_DATA0_B (1 << 11)
>> +/* phase C */
>> +#define RPD_STROBE_C (1 << 16)
>> +#define RPD_DATA0_C (1 << 17)
>> +#define RPU_STROBE_C (1 << 18)
>> +#define RPU_DATA0_C (1 << 19)
>> +/* phase D */
>> +#define RPD_STROBE_D (1 << 24)
>> +#define RPD_DATA0_D (1 << 25)
>> +#define RPU_STROBE_D (1 << 26)
>> +#define RPU_DATA0_D (1 << 27)
>> +
>> +#define XUSB_AO_UTMIP_PAD_CFG(x) (0x130 + (x) * 4)
>> +#define FSLS_USE_XUSB_AO (1 << 3)
>> +#define TRK_CTRL_USE_XUSB_AO (1 << 4)
>> +#define RPD_CTRL_USE_XUSB_AO (1 << 5)
>> +#define RPU_USE_XUSB_AO (1 << 6)
>> +#define VREG_USE_XUSB_AO (1 << 7)
>> +#define USBOP_VAL_PD (1 << 8)
>> +#define USBON_VAL_PD (1 << 9)
>> +#define E_DPD_OVRD_EN (1 << 10)
>> +#define E_DPD_OVRD_VAL (1 << 11)
>> +
>> +#define XUSB_AO_UHSIC_PAD_CFG(x) (0x150 + (x) * 4)
>> +#define STROBE_VAL_PD (1 << 0)
>> +#define DATA0_VAL_PD (1 << 1)
>> +#define USE_XUSB_AO (1 << 4)
>> +
>> #define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \
>> { \
>> .name = _name, \
>> @@ -130,7 +241,15 @@ struct tegra_xusb_fuse_calibration {
>> u32 rpd_ctrl;
>> };
>>
>> +struct tegra186_xusb_padctl_context {
>> + u32 vbus_id;
>> + u32 usb2_pad_mux;
>> + u32 usb2_port_cap;
>> + u32 ss_port_cap;
>> +};
>> +
>> struct tegra186_xusb_padctl {
>> + void __iomem *ao_regs;
>> struct tegra_xusb_padctl base;
>
> base should always be the first element in the structure to optimize
> container_of().
>
>>
>> struct tegra_xusb_fuse_calibration calib;
>> @@ -138,8 +257,25 @@ struct tegra186_xusb_padctl {
>> /* UTMI bias and tracking */
>> struct clk *usb2_trk_clk;
>> unsigned int bias_pad_enable;
>> +
>> + /* padctl context */
>> + struct tegra186_xusb_padctl_context context;
>> };
>>
>> +static inline void ao_writel(struct tegra186_xusb_padctl *priv, u32 value, unsigned long offset)
>
> I prefer offsets to be unsigned int because the _l_ in read_l_() and
> write_l_() was originally meant to be "long" (from back when long meant
> 32-bit). An unsigned long parameter can therefore be easily mistaken for
> the value. That's arguably less of an issue with 64-bit because u32 is
> an unsigned int. I guess making the offset unsigned int could also be
> confusing on 64-bit because now both the value and the offset are
> unsigned int, but for compatibility's sake I think that's okay.
>
> Also, offsets are usually pretty small, so a full 64-bit integer isn't
> really warranted.
>
> [...]
>> +static int tegra186_xusb_padctl_enable_phy_sleepwalk(struct tegra_xusb_padctl *padctl,
>> + struct phy *phy,
>> + enum usb_device_speed speed)
>> +{
>> + if (is_usb3_phy(phy))
>> + return tegra186_usb3_phy_enable_sleepwalk(phy);
>> +
>> + if (is_utmi_phy(phy))
>> + return tegra186_utmi_phy_enable_sleepwalk(phy, speed);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int tegra186_xusb_padctl_disable_phy_sleepwalk(struct tegra_xusb_padctl *padctl,
>> + struct phy *phy)
>> +{
>> + if (is_usb3_phy(phy))
>> + return tegra186_usb3_phy_disable_sleepwalk(phy);
>> +
>> + if (is_utmi_phy(phy))
>> + return tegra186_utmi_phy_disable_sleepwalk(phy);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int tegra186_xusb_padctl_enable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
>> +{
>> + if (is_usb3_phy(phy))
>> + return tegra186_usb3_phy_enable_wake(phy);
>> +
>> + if (is_utmi_phy(phy))
>> + return tegra186_utmi_phy_enable_wake(phy);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int tegra186_xusb_padctl_disable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
>> +{
>> + if (is_usb3_phy(phy))
>> + return tegra186_usb3_phy_disable_wake(phy);
>> +
>> + if (is_utmi_phy(phy))
>> + return tegra186_utmi_phy_disable_wake(phy);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static bool tegra186_xusb_padctl_remote_wake_detected(struct phy *phy)
>> +{
>> + if (is_utmi_phy(phy))
>> + return tegra186_utmi_phy_remote_wake_detected(phy);
>> +
>> + if (is_usb3_phy(phy))
>> + return tegra186_usb3_phy_remote_wake_detected(phy);
>> +
>> + return false;
>> +}
>
> These are pretty much the same multiplexers as for Tegra210. If we had
> lane ops function pointers we could make this code more generic.
>
>> +
>> static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
>> {
>> }
>> @@ -937,7 +1556,14 @@ static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
>> static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
>> .probe = tegra186_xusb_padctl_probe,
>> .remove = tegra186_xusb_padctl_remove,
>> + .suspend_noirq = tegra186_xusb_padctl_suspend_noirq,
>> + .resume_noirq = tegra186_xusb_padctl_resume_noirq,
>> .vbus_override = tegra186_xusb_padctl_vbus_override,
>> + .enable_phy_sleepwalk = tegra186_xusb_padctl_enable_phy_sleepwalk,
>> + .disable_phy_sleepwalk = tegra186_xusb_padctl_disable_phy_sleepwalk,
>> + .enable_phy_wake = tegra186_xusb_padctl_enable_phy_wake,
>> + .disable_phy_wake = tegra186_xusb_padctl_disable_phy_wake,
>> + .remote_wake_detected = tegra186_xusb_padctl_remote_wake_detected,
>
> We might even be able to get rid of these callbacks because the code
> that needs to call these can directly call into the lane ops.
>
> Thierry
>