Re: [PATCH] tpm_tis: Disable interrupts on ThinkPad T490s

From: Matthew Garrett
Date: Thu Oct 15 2020 - 18:39:14 EST


On Thu, Oct 15, 2020 at 2:44 PM Jerry Snitselaar <jsnitsel@xxxxxxxxxx> wrote:
>
> There is a misconfiguration in the bios of the gpio pin used for the
> interrupt in the T490s. When interrupts are enabled in the tpm_tis
> driver code this results in an interrupt storm. This was initially
> reported when we attempted to enable the interrupt code in the tpm_tis
> driver, which previously wasn't setting a flag to enable it. Due to
> the reports of the interrupt storm that code was reverted and we went back
> to polling instead of using interrupts. Now that we know the T490s problem
> is a firmware issue, add code to check if the system is a T490s and
> disable interrupts if that is the case. This will allow us to enable
> interrupts for everyone else. If the user has a fixed bios they can
> force the enabling of interrupts with tpm_tis.interrupts=1 on the
> kernel command line.

I think an implication of this is that systems haven't been
well-tested with interrupts enabled. In general when we've found a
firmware issue in one place it ends up happening elsewhere as well, so
it wouldn't surprise me if there are other machines that will also be
unhappy with interrupts enabled. Would it be possible to automatically
detect this case (eg, if we get more than a certain number of
interrupts in a certain timeframe immediately after enabling the
interrupt) and automatically fall back to polling in that case? It
would also mean that users with fixed firmware wouldn't need to pass a
parameter.