[GIT PULL] MTD updates for 5.10

From: Richard Weinberger
Date: Fri Oct 16 2020 - 08:14:30 EST

Next message: Coiby Xu: "[PATCH v3 8/8] staging: qlge: add documentation for debugging qlge"
Previous message: Coiby Xu: "[PATCH v3 7/8] staging: qlge: clean up debugging code in the QL_ALL_DUMP ifdef land"
Next in thread: pr-tracker-bot: "Re: [GIT PULL] MTD updates for 5.10"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Linus,

The following changes since commit ba4f184e126b751d1bffad5897f263108befc780:

Linux 5.9-rc6 (2020-09-20 16:33:55 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/mtd/for-5.10

for you to fetch changes up to 6402f4ce95811db7df72244ca84860332e4c2518:

mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled (2020-10-12 21:12:08 +0200)

----------------------------------------------------------------
NAND Core changes:
* Drop useless 'depends on' in Kconfig
* Add an extra level in the Kconfig hierarchy
* Trivial spellings
* Dynamic allocation of the interface configurations
* Dropping the default ONFI timing mode
* Various cleanup (types, structures, naming, comments)
* Hide the chip->data_interface indirection
* Add the generic rb-gpios property
* Add the ->choose_interface_config() hook
* Introduce nand_choose_best_sdr_timings()
* Use default values for tPROG_max and tBERS_max
* Avoid redefining tR_max and tCCS_min
* Add a helper to find the closest ONFI mode
* bcm63xx MTD parsers: simplify CFE detection

Raw NAND controller drivers changes:
* fsl-upm: Deprecation of specific DT properties
* fsl_upm: Driver rework and cleanup in favor of ->exec_op()
* Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
* brcmnand: ECC error handling on EDU transfers
* brcmnand: Don't default to EDU transfers
* qcom: Set BAM mode only if not set already
* qcom: Avoid write to unavailable register
* gpio: Driver rework in favor of ->exec_op()
* tango: ->exec_op() conversion
* mtk: ->exec_op() conversion

Raw NAND chip drivers changes:
* toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
* toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
* toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
* hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

HyperBus changes:
* DMA support for TI's AM654 HyperBus controller driver.
* HyperBus frontend driver for Renesas RPC-IF driver.

SPI NOR core changes:
* Support for Winbond w25q64jwm flash
* Enable 4K sector support for mx25l12805d

SPI NOR controller drivers changes:
* intel-spi Add Alder Lake-S PCI ID

MTD Core changes:
* mtdoops: Don't run panic write twice
* mtdconcat: Correctly handle panic write
* Use DEFINE_SHOW_ATTRIBUTE

----------------------------------------------------------------
Alex Dewar (1):
mtd: rawnand: atmel: Check return values for nand_read_data_op

Arnd Bergmann (1):
mtd: lpddr: fix excessive stack usage with clang

Bernard Zhao (1):
mtd: maps: vmu-flash: fix typos for struct memcard

Boris Brezillon (6):
mtd: rawnand: atmel: Enable the NFC controller at probe time
mtd: rawnand: atmel: Drop redundant nand_read_page_op()
mtd: rawnand: atmel: Use nand_{write,read}_data_op()
mtd: rawnand: atmel: Use nand_prog_page_end_op()
mtd: rawnand: atmel: Convert the driver to exec_op()
mtd: rawnand: atmel: Get rid of the legacy interface implementation

Chris Packham (2):
mtd: maps: physmap: Retain mtd-name property from dts
mtd: rawnand: marvell: Support panic_write for mtdoops

Christophe Kerello (1):
mtd: rawnand: stm32_fmc2: fix a buffer overflow

Colin Ian King (1):
mtd: mtdconcat: map: remove redundant assignment to variable 'size'

Douglas Anderson (1):
mtd: spi-nor: Prefer asynchronous probe

Evgeny Novikov (1):
mtd: rawnand: vf610: disable clk on error handling path in probe

Florian Fainelli (1):
mtd: parsers: bcm63xx: Do not make it modular

Gustavo A. R. Silva (3):
mtd: lpddr: Fix bad logic in print_drs_error
mtd: lpddr: Replace printk with pr_notice
mtd: lpddr: Move function print_drs_error to lpddr_cmds.c

Hauke Mehrtens (3):
mtd: spinand: gigadevice: Only one dummy byte in QUADIO
mtd: spinand: gigadevice: Add QE Bit
mtd: spinand: gigadevice: Add support for GD5F4GQ4xC

Ikjoon Jang (1):
mtd: spi-nor: winbond: Add support for w25q64jwm

Janusz Krzysztofik (1):
mtd: rawnand: ams-delta: Fix non-OF build warning

Joe Perches (1):
mtd: Avoid comma separated statements

Krzysztof Kozlowski (6):
mtd: onenand: Simplify with dev_err_probe()
mtd: rawnand: atmel: Simplify with dev_err_probe()
mtd: rawnand: gpmi: Simplify with dev_err_probe()
mtd: rawnand: marvell: Simplify with dev_err_probe()
mtd: rawnand: marvell: Fix and update kerneldoc
mtd: rawnand: qcom: Simplify with dev_err_probe()

Liu Shixin (3):
mtd: rawnand: cadence: remove a redundant dev_err call
mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu

Mark Tomlinson (1):
mtd: mtdoops: Don't write panic data twice

Matt Weber (1):
mtd: mtdconcat: map through panic write handler

Mika Westerberg (1):
mtd: spi-nor: intel-spi: Add support for Intel Alder Lake-S SPI serial flash

Miquel Raynal (21):
mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration
mtd: rawnand: Rename the ECC algorithm enumeration items
mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer
mtd: nand: Add a NAND page I/O request type
dt-bindings: mtd: Document nand-ecc-placement
dt-bindings: mtd: Document nand-ecc-engine
dt-bindings: mtd: Document boolean NAND ECC properties
mtd: nand: Introduce the ECC engine framework
mtd: rawnand: Separate the ECC engine type and the ECC byte placement
mtd: rawnand: Use the new ECC engine type enumeration
mtd: nand: Create a helper to extract the ECC configuration
mtd: spinand: Use nanddev_get_ecc_conf() when relevant
mtd: nand: Create helpers to set/extract the ECC requirements
mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
mtd: nand: Use the new generic ECC object
mtd: rawnand: Make use of the ECC framework
mtd: rawnand: Use the ECC framework OOB layouts
mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper
mtd: rawnand: Use the ECC framework user input parsing bits
mtd: rawnand: Use the NAND framework user_conf object for ECC flags
mtd: spear_smi: Enable compile testing

Pavel Machek (1):
mtd: rawnand: oxnas: cleanup/simplify code

Qinglang Miao (1):
mtd: spear_smi: use for_each_child_of_node() macro

Richard Weinberger (3):
Merge tag 'nand/for-5.10' of git://git.kernel.org/.../mtd/linux into mtd/next
Merge tag 'spi-nor/for-5.10' of git://git.kernel.org/.../mtd/linux into mtd/next
Merge tag 'cfi/for-5.10' of gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next

Robert Marko (1):
mtd: spi-nor: macronix: Add SECT_4K to mx25l12805d

Serge Semin (1):
mtd: physmap: Add Baikal-T1 physically mapped ROM support

Sergei Shtylyov (1):
mtd: hyperbus: add Renesas RPC-IF driver

Tudor Ambarus (2):
mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()

Vignesh Raghavendra (6):
mtd: hyperbus: Provide per device private pointer
mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access
mtd: hyperbus: hbmc-am654: Drop pm_runtime* calls from probe
mtd: hyperbus: hbmc-am654: Add DMA support for reads
Revert "mtd: spi-nor: Prefer asynchronous probe"
mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled

Wei Yongjun (1):
mtd: rawnand: pasemi: Make pasemi_device_ready() static

Yongqiang Liu (1):
mtd: mtdcore: Convert to DEFINE_SHOW_ATTRIBUTE

YouChing Lin (2):
mtd: spinand: macronix: Add support for MX31LF1GE4BC
mtd: spinand: macronix: Add support for MX31UF1GE4BC

YueHaibing (1):
mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()

.../devicetree/bindings/mtd/nand-controller.yaml | 31 ++
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 3 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-s3c24xx/common-smdk.c | 2 +-
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
drivers/mtd/devices/Kconfig | 2 +-
drivers/mtd/devices/lart.c | 10 +-
drivers/mtd/devices/spear_smi.c | 4 +-
drivers/mtd/hyperbus/Kconfig | 7 +
drivers/mtd/hyperbus/Makefile | 1 +
drivers/mtd/hyperbus/hbmc-am654.c | 144 +++++-
drivers/mtd/hyperbus/rpc-if.c | 170 +++++++
drivers/mtd/lpddr/lpddr2_nvm.c | 35 +-
drivers/mtd/lpddr/lpddr_cmds.c | 28 ++
drivers/mtd/maps/Kconfig | 11 +
drivers/mtd/maps/Makefile | 1 +
drivers/mtd/maps/physmap-bt1-rom.c | 126 +++++
drivers/mtd/maps/physmap-bt1-rom.h | 17 +
drivers/mtd/maps/physmap-core.c | 8 +-
drivers/mtd/maps/vmu-flash.c | 11 +-
drivers/mtd/mtdconcat.c | 43 ++
drivers/mtd/mtdcore.c | 28 +-
drivers/mtd/mtdoops.c | 11 +-
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/ecc.c | 484 ++++++++++++++++++
drivers/mtd/nand/onenand/onenand_base.c | 9 +-
drivers/mtd/nand/onenand/onenand_omap2.c | 5 +-
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/ams-delta.c | 6 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 16 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 457 +++++++++--------
drivers/mtd/nand/raw/au1550nd.c | 4 +-
drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 3 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 28 +-
drivers/mtd/nand/raw/cadence-nand-controller.c | 12 +-
drivers/mtd/nand/raw/cafe_nand.c | 3 +-
drivers/mtd/nand/raw/cs553x_nand.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 38 +-
drivers/mtd/nand/raw/denali.c | 3 +-
drivers/mtd/nand/raw/denali_pci.c | 2 +-
drivers/mtd/nand/raw/diskonchip.c | 3 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 20 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 12 +-
drivers/mtd/nand/raw/fsl_upm.c | 4 +-
drivers/mtd/nand/raw/fsmc_nand.c | 14 +-
drivers/mtd/nand/raw/gpio.c | 4 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 21 +-
drivers/mtd/nand/raw/hisi504_nand.c | 6 +-
drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 20 +-
drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 3 +-
drivers/mtd/nand/raw/marvell_nand.c | 101 ++--
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 4 +-
drivers/mtd/nand/raw/mtk_nand.c | 12 +-
drivers/mtd/nand/raw/mxc_nand.c | 25 +-
drivers/mtd/nand/raw/nand_base.c | 554 ++++++++-------------
drivers/mtd/nand/raw/nand_bch.c | 1 +
drivers/mtd/nand/raw/nand_esmt.c | 15 +-
drivers/mtd/nand/raw/nand_hynix.c | 44 +-
drivers/mtd/nand/raw/nand_jedec.c | 9 +-
drivers/mtd/nand/raw/nand_micron.c | 23 +-
drivers/mtd/nand/raw/nand_onfi.c | 17 +-
drivers/mtd/nand/raw/nand_samsung.c | 22 +-
drivers/mtd/nand/raw/nand_toshiba.c | 19 +-
drivers/mtd/nand/raw/nandsim.c | 8 +-
drivers/mtd/nand/raw/ndfc.c | 2 +-
drivers/mtd/nand/raw/omap2.c | 22 +-
drivers/mtd/nand/raw/orion_nand.c | 4 +-
drivers/mtd/nand/raw/oxnas_nand.c | 3 +-
drivers/mtd/nand/raw/pasemi_nand.c | 6 +-
drivers/mtd/nand/raw/plat_nand.c | 4 +-
drivers/mtd/nand/raw/qcom_nandc.c | 26 +-
drivers/mtd/nand/raw/r852.c | 3 +-
drivers/mtd/nand/raw/s3c2410.c | 20 +-
drivers/mtd/nand/raw/sh_flctl.c | 6 +-
drivers/mtd/nand/raw/sharpsl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 5 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 11 +-
drivers/mtd/nand/raw/sunxi_nand.c | 27 +-
drivers/mtd/nand/raw/tango_nand.c | 4 +-
drivers/mtd/nand/raw/tegra_nand.c | 37 +-
drivers/mtd/nand/raw/tmio_nand.c | 2 +-
drivers/mtd/nand/raw/txx9ndfmc.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 17 +-
drivers/mtd/nand/raw/xway_nand.c | 4 +-
drivers/mtd/nand/spi/core.c | 12 +-
drivers/mtd/nand/spi/gigadevice.c | 63 ++-
drivers/mtd/nand/spi/macronix.c | 27 +-
drivers/mtd/nand/spi/toshiba.c | 6 +-
drivers/mtd/parsers/Kconfig | 2 +-
drivers/mtd/spi-nor/controllers/intel-spi-pci.c | 1 +
drivers/mtd/spi-nor/macronix.c | 2 +-
drivers/mtd/spi-nor/winbond.c | 9 +
include/linux/mtd/hyperbus.h | 13 +
include/linux/mtd/nand.h | 188 ++++++-
include/linux/mtd/pfow.h | 33 --
include/linux/mtd/rawnand.h | 34 +-
include/linux/platform_data/mtd-davinci.h | 9 +-
include/linux/platform_data/mtd-nand-s3c2410.h | 2 +-
122 files changed, 2317 insertions(+), 1078 deletions(-)
create mode 100644 drivers/mtd/hyperbus/rpc-if.c
create mode 100644 drivers/mtd/maps/physmap-bt1-rom.c
create mode 100644 drivers/mtd/maps/physmap-bt1-rom.h
create mode 100644 drivers/mtd/nand/ecc.c

Next message: Coiby Xu: "[PATCH v3 8/8] staging: qlge: add documentation for debugging qlge"
Previous message: Coiby Xu: "[PATCH v3 7/8] staging: qlge: clean up debugging code in the QL_ALL_DUMP ifdef land"
Next in thread: pr-tracker-bot: "Re: [GIT PULL] MTD updates for 5.10"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]