Re: [PATCH v1] usb: dwc3: core: fix a issue about clear connect state

[Sergei Shtylyov]

Hello!

On 10/18/20 4:47 PM, Dejin Zheng wrote:

> According to Synopsys Programming Guide chapter 2.2 Register Resets,
> it cannot reset the DCTL register by set DCTL.CSFTRST for Core Soft Reset,

   s/set/setting/.

> if DWC3 controller as a slave device and stay connected with a usb host,
> then, reboot linux, it will fail to reinitialize dwc3 as a slave device

   s/reboot/while rebooting/.

> when the DWC3 controller did not power off. because the connection status
> is incorrect, so we also need clear DCTL.RUN_STOP bit for disable connect
                               ^ to                               ^ ing

> when do core soft reset.
         ^ ing

> Fixes: f59dcab176293b6 ("usb: dwc3: core: improve reset sequence")
> Signed-off-by: Dejin Zheng <zhengdejin5@xxxxxxxxx>
[...]

MBR, Sergei