[PATCH v5 00/17] HSM driver for ACRN hypervisor
From: shuo . a . liu
Date: Mon Oct 19 2020 - 02:18:40 EST
From: Shuo Liu <shuo.a.liu@xxxxxxxxx>
ACRN is a Type 1 reference hypervisor stack, running directly on the bare-metal
hardware, and is suitable for a variety of IoT and embedded device solutions.
ACRN implements a hybrid VMM architecture, using a privileged Service VM. The
Service VM manages the system resources (CPU, memory, etc.) and I/O devices of
User VMs. Multiple User VMs are supported, with each of them running Linux,
Android OS or Windows. Both Service VM and User VMs are guest VM.
Below figure shows the architecture.
Service VM User VM
+----------------------------+ | +------------------+
| +--------------+ | | | |
| |ACRN userspace| | | | |
| +--------------+ | | | |
|-----------------ioctl------| | | | ...
|kernel space +----------+ | | | |
| | HSM | | | | Drivers |
| +----------+ | | | |
+--------------------|-------+ | +------------------+
+---------------------hypercall----------------------------------------+
| ACRN Hypervisor |
+----------------------------------------------------------------------+
| Hardware |
+----------------------------------------------------------------------+
There is only one Service VM which could run Linux as OS.
In a typical case, the Service VM will be auto started when ACRN Hypervisor is
booted. Then the ACRN userspace (an application running in Service VM) could be
used to start/stop User VMs by communicating with ACRN Hypervisor Service
Module (HSM).
ACRN Hypervisor Service Module (HSM) is a middle layer that allows the ACRN
userspace and Service VM OS kernel to communicate with ACRN Hypervisor
and manage different User VMs. This middle layer provides the following
functionalities,
- Issues hypercalls to the hypervisor to manage User VMs:
* VM/vCPU management
* Memory management
* Device passthrough
* Interrupts injection
- I/O requests handling from User VMs.
- Exports ioctl through HSM char device.
- Exports function calls for other kernel modules
ACRN is focused on embedded system. So it doesn't support some features.
E.g.,
- ACRN doesn't support VM migration.
- ACRN doesn't support vCPU migration.
This patch set adds the HSM to the Linux kernel.
The basic ARCN support was merged to upstream already.
https://lore.kernel.org/lkml/1559108037-18813-3-git-send-email-yakui.zhao@xxxxxxxxx/
ChangeLog:
v5:
- Corrected typo in documentation.
- Removed unused pr_fmt().
- Used supported constraint with a explicit MOV to R8 at beginning of ASM for hypercall interface.
- Used dev_dbg() to replace dev_err() in places which might cause a DoS.
- Introduced acrn_vm_list_lock as a mutex for friendly review.
- Changed to use default attribute group list to add attribute files.
v4:
- Used acrn_dev.this_device directly for dev_*() (Reinette)
- Removed the odd usage of {get|put}_device() on &acrn_dev->this_device (Greg)
- Removed unused log code. (Greg)
- Corrected the return error values. (Greg)
- Mentioned that HSM relies hypervisor for sanity check in acrn_dev_ioctl() comments (Greg)
v3:
- Used {get|put}_device() helpers on &acrn_dev->this_device
- Moved unused code from front patches to later ones.
- Removed self-defined pr_fmt() and dev_fmt()
- Provided comments for acrn_vm_list_lock.
v2:
- Removed API version related code. (Dave)
- Replaced pr_*() by dev_*(). (Greg)
- Used -ENOTTY as the error code of unsupported ioctl. (Greg)
Shuo Liu (16):
docs: acrn: Introduce ACRN
x86/acrn: Introduce acrn_{setup, remove}_intr_handler()
x86/acrn: Introduce hypercall interfaces
virt: acrn: Introduce ACRN HSM basic driver
virt: acrn: Introduce VM management interfaces
virt: acrn: Introduce an ioctl to set vCPU registers state
virt: acrn: Introduce EPT mapping management
virt: acrn: Introduce I/O request management
virt: acrn: Introduce PCI configuration space PIO accesses combiner
virt: acrn: Introduce interfaces for PCI device passthrough
virt: acrn: Introduce interrupt injection interfaces
virt: acrn: Introduce interfaces to query C-states and P-states
allowed by hypervisor
virt: acrn: Introduce I/O ranges operation interfaces
virt: acrn: Introduce ioeventfd
virt: acrn: Introduce irqfd
virt: acrn: Introduce an interface for Service VM to control vCPU
Yin Fengwei (1):
x86/acrn: Introduce an API to check if a VM is privileged
.../userspace-api/ioctl/ioctl-number.rst | 1 +
Documentation/virt/acrn/index.rst | 11 +
Documentation/virt/acrn/introduction.rst | 40 ++
Documentation/virt/acrn/io-request.rst | 97 +++
Documentation/virt/index.rst | 1 +
MAINTAINERS | 9 +
arch/x86/include/asm/acrn.h | 71 ++
arch/x86/kernel/cpu/acrn.c | 33 +-
drivers/virt/Kconfig | 2 +
drivers/virt/Makefile | 1 +
drivers/virt/acrn/Kconfig | 15 +
drivers/virt/acrn/Makefile | 3 +
drivers/virt/acrn/acrn_drv.h | 229 +++++++
drivers/virt/acrn/hsm.c | 435 ++++++++++++
drivers/virt/acrn/hypercall.h | 254 +++++++
drivers/virt/acrn/ioeventfd.c | 273 ++++++++
drivers/virt/acrn/ioreq.c | 645 ++++++++++++++++++
drivers/virt/acrn/irqfd.c | 235 +++++++
drivers/virt/acrn/mm.c | 305 +++++++++
drivers/virt/acrn/vm.c | 126 ++++
include/uapi/linux/acrn.h | 486 +++++++++++++
21 files changed, 3271 insertions(+), 1 deletion(-)
create mode 100644 Documentation/virt/acrn/index.rst
create mode 100644 Documentation/virt/acrn/introduction.rst
create mode 100644 Documentation/virt/acrn/io-request.rst
create mode 100644 arch/x86/include/asm/acrn.h
create mode 100644 drivers/virt/acrn/Kconfig
create mode 100644 drivers/virt/acrn/Makefile
create mode 100644 drivers/virt/acrn/acrn_drv.h
create mode 100644 drivers/virt/acrn/hsm.c
create mode 100644 drivers/virt/acrn/hypercall.h
create mode 100644 drivers/virt/acrn/ioeventfd.c
create mode 100644 drivers/virt/acrn/ioreq.c
create mode 100644 drivers/virt/acrn/irqfd.c
create mode 100644 drivers/virt/acrn/mm.c
create mode 100644 drivers/virt/acrn/vm.c
create mode 100644 include/uapi/linux/acrn.h
base-commit: 18445bf405cb331117bc98427b1ba6f12418ad17
--
2.28.0