[PATCH 6/6] arm64: dts: exynos: add the WiFi/PCIe support to TM2(e) boards
From: Marek Szyprowski
Date: Mon Oct 19 2020 - 05:48:28 EST
From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Add the nodes relevant to PCIe PHY and PCIe support. PCIe is used for the
WiFi interface (Broadcom Limited BCM4358 802.11ac Wireless LAN SoC).
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
[mszyprow: rewrote commit message, reworked board/generic dts/dtsi split]
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
.../boot/dts/exynos/exynos5433-pinctrl.dtsi | 2 +-
.../dts/exynos/exynos5433-tm2-common.dtsi | 24 ++++++++++++-
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 36 +++++++++++++++++++
3 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 9df7c65593a1..32a6518517e5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -329,7 +329,7 @@
};
pcie_bus: pcie_bus {
- samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+ samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 829fea23d4ab..ef45ef86c48d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -969,6 +969,25 @@
bus-width = <4>;
};
+&pcie {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+ vdd10-supply = <&ldo6_reg>;
+ vdd18-supply = <&ldo7_reg>;
+ assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
+ <&cmu_top CLK_MOUT_SCLK_PCIE_100>;
+ assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+ assigned-clock-rates = <0>, <100000000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&ppmu_d0_general {
status = "okay";
events {
@@ -1085,8 +1104,11 @@
pinctrl-names = "default";
pinctrl-0 = <&initial_ese>;
+ pcie_wlanen: pcie-wlanen {
+ PIN(INPUT, gpj2-0, UP, FAST_SR4);
+ };
+
initial_ese: initial-state {
- PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 8eb4576da8f3..be2d1753d1d1 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1029,6 +1029,11 @@
reg = <0x145f0000 0x1038>;
};
+ syscon_fsys: syscon@156f0000 {
+ compatible = "syscon";
+ reg = <0x156f0000 0x1044>;
+ };
+
gsc_0: video-scaler@13c00000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c00000 0x1000>;
@@ -1830,6 +1835,37 @@
status = "disabled";
};
};
+
+ pcie_phy: pcie-phy@15680000 {
+ compatible = "samsung,exynos5433-pcie-phy";
+ reg = <0x15680000 0x1000>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ samsung,fsys-sysreg = <&syscon_fsys>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ pcie: pcie@15700000 {
+ compatible = "samsung,exynos5433-pcie";
+ reg = <0x156b0000 0x1000>, <0x15700000 0x1000>,
+ <0x0c000000 0x1000>;
+ reg-names = "elbi", "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_fsys CLK_PCIE>,
+ <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+ clock-names = "pcie", "pcie_bus";
+ num-lanes = <1>;
+ bus-range = <0x00 0xff>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>,
+ <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+ status = "disabled";
+ };
};
timer: timer {
--
2.17.1