Re: [PATCH 2/2] arm64: dts: mediatek: mt8516: add usb1 node

[Matthias Brugger]

On 14/10/2020 18:24, Fabien Parent wrote:
> The MT8516 has 2 USB instances. Add support for the second USB instance.
> usb1 can only work in host mode.
>
> Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>

Applied to v5.10-tmp/dts64

Thanks!

> ---
>   arch/arm64/boot/dts/mediatek/mt8516.dtsi | 21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> index 50049b6c1ba7..eca7969e15ab 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> @@ -455,6 +455,20 @@ usb0: usb@11100000 {
>   			status = "disabled";
>   		};
>   
> +		usb1: usb@11190000 {
> +			compatible = "mediatek,mtk-musb";
> +			reg = <0 0x11190000 0 0x1000>;
> +			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
> +			interrupt-names = "mc";
> +			phys = <&usb1_port PHY_TYPE_USB2>;
> +			clocks = <&topckgen CLK_TOP_USB>,
> +				 <&topckgen CLK_TOP_USBIF>,
> +				 <&topckgen CLK_TOP_USB_1P>;
> +			clock-names = "main","mcu","univpll";
> +			dr_mode = "host";
> +			status = "disabled";
> +		};
> +
>   		usb_phy: usb@11110000 {
>   			compatible = "mediatek,generic-tphy-v1";
>   			reg = <0 0x11110000 0 0x800>;
> @@ -469,6 +483,13 @@ usb0_port: usb-phy@11110800 {
>   				clock-names = "ref";
>   				#phy-cells = <1>;
>   			};
> +
> +			usb1_port: usb-phy@11110900 {
> +				reg = <0 0x11110900 0 0x100>;
> +				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +			};
>   		};
>   
>   		auxadc: adc@11003000 {