[RESEND PATCH] PCI: qcom: use PHY_REFCLK_USE_PAD only for ipq8064

[Ansuel Smith]

The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064
devices. It was tested that while apq doesn't require the padding, ipq
SoC must use it or the kernel hangs on boot.

Fixes: de3c4bf6489 ("PCI: qcom: Add support for tx term offset for rev 2.1.0")
Reported-by: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
Signed-off-by: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v4.19+
---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 3aac77a295ba..dad6e9ce66ba 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -387,7 +387,9 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 
 	/* enable external reference clock */
 	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-	val &= ~PHY_REFCLK_USE_PAD;
+	/* USE_PAD is required only for ipq806x */
+	if (!of_device_is_compatible(node, "qcom,pcie-apq8064"))
+		val &= ~PHY_REFCLK_USE_PAD;
 	val |= PHY_REFCLK_SSP_EN;
 	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
 
-- 
2.27.0