[PATCH 1/5] arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter

From: Adam Ford
Date: Mon Oct 19 2020 - 13:45:39 EST


The driver exists for the Enhanced Asynchronous Sample Rate Converter
(EASRC) Controller, but there isn't a device tree entry for it.

On the vendor kernel, they put this on a spba-bus for SDMA support.

Add the the node for the spba-bus with the easrc node inside.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 746faf1cf2fb..7d34281332e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -246,6 +246,34 @@ aips1: bus@30000000 {
#size-cells = <1>;
ranges;

+ spba-bus@30000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x100000>;
+ ranges;
+
+ easrc: easrc@300C0000 {
+ compatible = "fsl,imx8mn-easrc";
+ reg = <0x300C0000 0x10000>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+ clock-names = "mem";
+ dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+ <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+ <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+ <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+ dma-names = "ctx0_rx", "ctx0_tx",
+ "ctx1_rx", "ctx1_tx",
+ "ctx2_rx", "ctx2_tx",
+ "ctx3_rx", "ctx3_tx";
+ fsl,easrc-ram-script-name = "imx/easrc/easrc-imx8mn.bin";
+ fsl,asrc-rate = <8000>;
+ fsl,asrc-width = <16>;
+ status = "disabled";
+ };
+ };
+
gpio1: gpio@30200000 {
compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>;
--
2.25.1