[PATCH v2] pciehp: Add check for DL_ACTIVE bit in pciehp_check_link_status()

[Sanjay R Mehta]

From: Sanjay R Mehta <sanju.mehta@xxxxxxx>

if DL_ACTIVE bit is set it means that there is no need to check
PCI_EXP_LNKSTA_LT bit, as DL_ACTIVE would have set only if the link
is already trained. Hence adding a check which takes care of this
scenario.

Signed-off-by: Sanjay R Mehta <sanju.mehta@xxxxxxx>
---
 drivers/pci/hotplug/pciehp_hpc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 53433b37e181..8ab2f6a2f388 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -309,7 +309,8 @@ int pciehp_check_link_status(struct controller *ctrl)
 
 	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
 	ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
-	if ((lnk_status & PCI_EXP_LNKSTA_LT) ||
+	if (((lnk_status & PCI_EXP_LNKSTA_LT) &&
+	     !(lnk_status & PCI_EXP_LNKSTA_DLLLA)) ||
 	    !(lnk_status & PCI_EXP_LNKSTA_NLW)) {
 		ctrl_err(ctrl, "link training error: status %#06x\n",
 			 lnk_status);
-- 
2.25.1