Re: [PATCH v3 2/8] staging: qlge: Initialize devlink health dump framework
From: Shung-Hsi Yu
Date: Tue Oct 20 2020 - 04:57:34 EST
Hi,
This patch trigger the following KASAN error inside qlge_init_device().
[...] general protection fault, probably for non-canonical address 0xdffffc000000004b: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[...] KASAN: null-ptr-deref in range [0x0000000000000258-0x000000000000025f]
[...] CPU: 0 PID: 438 Comm: systemd-udevd Tainted: G C E 5.9.0-kvmsmall+ #7
[...] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-
g...ilt.opensuse.org 04/01/2014
[...] RIP: 0010:qlge_get_8000_flash_params+0x377/0x6e0 [qlge]
[...] Code: 03 80 3c 02 00 0f 85 57 03 00 00 49 8b af 68 08 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d bd 5f 02 00 00 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 c6 02 00 00
[...] RSP: 0018:ffffc90000f97788 EFLAGS: 00010207
[...] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[...] RDX: 000000000000004b RSI: ffffffffc08cb843 RDI: 000000000000025f
[...] R10: fffffbfff5f718a0 R11: 0000000000000001 R12: dffffc0000000000
[...] R13: ffff888111085d40 R14: ffff888111085d40 R15: ffff888111080280
[...] FS: 00007f315f5db280(0000) GS:ffff8881f5200000(0000) knlGS:0000000000000000
[...] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[...] CR2: 000055bb25297170 CR3: 0000000110674000 CR4: 00000000000006f0
[...] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[...] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[...] Call Trace:
[...] ? qlge_get_8012_flash_params+0x600/0x600 [qlge]
[...] ? static_obj+0x8a/0xc0
[...] ? lockdep_init_map_waits+0x26a/0x700
[...] qlge_init_device+0x425/0x1000 [qlge]
[...] ? debug_mutex_init+0x31/0x60
[...] qlge_probe+0xfe/0x6c0 [qlge]
[...] ? qlge_set_mac_addr+0x330/0x330 [qlge]
[...] local_pci_probe+0xd8/0x170
[...] pci_call_probe+0x156/0x3d0
[...] ? pci_match_device+0x30c/0x620
[...] ? pci_pm_suspend_noirq+0x980/0x980
[...] ? pci_match_device+0x33c/0x620
[...] ? kernfs_put+0x18/0x30
[...] pci_device_probe+0x1e0/0x270
[...] ? pci_dma_configure+0x57/0xd0
[...] really_probe+0x218/0xd20
[...] driver_probe_device+0x1e6/0x2c0
[...] device_driver_attach+0x209/0x270
[...] __driver_attach+0xf6/0x260
[...] ? device_driver_attach+0x270/0x270
[...] bus_for_each_dev+0x114/0x1a0
[...] ? subsys_find_device_by_id+0x2d0/0x2d0
[...] ? bus_add_driver+0x2d2/0x620
[...] bus_add_driver+0x352/0x620
[...] driver_register+0x1ee/0x4b0
[...] ? 0xffffffffc08e9000
[...] do_one_initcall+0xbb/0x400
[...] ? trace_event_raw_event_initcall_finish+0x1c0/0x1c0
[...] ? rcu_read_lock_sched_held+0x3f/0x70
[...] ? trace_kmalloc+0xa2/0xd0
[...] ? kasan_unpoison_shadow+0x33/0x40
[...] ? kasan_unpoison_shadow+0x33/0x40
[...] do_init_module+0x1ce/0x780
[...] load_module+0x14b1/0x16d0
[...] ? post_relocation+0x3a0/0x3a0
[...] ? device_driver_attach+0x270/0x270
[...] bus_for_each_dev+0x114/0x1a0
[...] ? subsys_find_device_by_id+0x2d0/0x2d0
[...] ? bus_add_driver+0x2d2/0x620
[...] bus_add_driver+0x352/0x620
[...] driver_register+0x1ee/0x4b0
[...] ? 0xffffffffc08e9000
[...] do_one_initcall+0xbb/0x400
[...] ? trace_event_raw_event_initcall_finish+0x1c0/0x1c0
[...] ? rcu_read_lock_sched_held+0x3f/0x70
[...] ? trace_kmalloc+0xa2/0xd0
[...] ? kasan_unpoison_shadow+0x33/0x40
[...] ? kasan_unpoison_shadow+0x33/0x40
[...] do_init_module+0x1ce/0x780
[...] load_module+0x14b1/0x16d0
[...] ? post_relocation+0x3a0/0x3a0
[...] ? kernel_read_file_from_fd+0x4b/0x90
[...] __do_sys_finit_module+0x110/0x1a0
[...] ? __ia32_sys_init_module+0xa0/0xa0
[...] do_syscall_64+0x33/0x80
[...] entry_SYSCALL_64_after_hwframe+0x44/0xa9
With qlge_get_8000_flash_params+0x377/0x6e0 corresponding to the following:
if (qdev->flash.flash_params_8000.data_type1 == 2)
memcpy(mac_addr,
qdev->flash.flash_params_8000.mac_addr1,
qdev->ndev->addr_len); // <---- Here
IIRC I didn't see this with v1. However I didn't test v2, so I'm not sure if
this issue is introduced during v2 or v3.
Best,
Shung-Hsi