[PATCH 2/8] dt-bindings: display: mediatek: dsi: add documentation for MT8167 SoC

[Fabien Parent]

Add binding documentation for the MT8167 SoC. The SoC needs
an additional clock compared to the already supported SoC: mipi26m.

Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>
---
 .../devicetree/bindings/display/mediatek/mediatek,dsi.txt  | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index f06f24d405a5..10ae6be7225e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,12 +7,13 @@ channel output.
 
 Required properties:
 - compatible: "mediatek,<chip>-dsi"
-- the supported chips are mt2701, mt7623, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
   See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "engine", "digital", and "hs"
+- clock-names: must contain "engine", "digital", "hs"
+  Can optionnally also contain "mipi26m"
 - phys: phandle link to the MIPI D-PHY controller.
 - phy-names: must contain "dphy"
 - port: Output port node with endpoint definitions as described in
@@ -26,7 +27,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
 
 Required properties:
 - compatible: "mediatek,<chip>-mipi-tx"
-- the supported chips are mt2701, 7623, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8167, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - clocks: PLL reference clock
 - clock-output-names: name of the output clock line to the DSI encoder
-- 
2.28.0