Re: [PATCH v3 1/3] net: dsa: mv88e6xxx: Don't force link when using in-band-status

[Chris Packham]

On 21/10/20 10:18 am, Russell King - ARM Linux admin wrote:
> On Tue, Oct 20, 2020 at 09:06:32PM +0000, Chris Packham wrote:
>> On 21/10/20 3:51 am, Marek Behun wrote:
>>> On Tue, 20 Oct 2020 15:15:25 +0100
>>> Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx> wrote:
>>>
>>>> On Tue, Oct 20, 2020 at 04:05:35PM +0200, Andrew Lunn wrote:
>>>>> On Tue, Oct 20, 2020 at 03:49:40PM +0200, Marek Behun wrote:
>>>>>> On Tue, 20 Oct 2020 11:15:52 +0100
>>>>>> Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx> wrote:
>>>>>>     
>>>>>>> On Tue, Oct 20, 2020 at 04:45:56PM +1300, Chris Packham wrote:
>>>>>>>> When a port is configured with 'managed = "in-band-status"' don't force
>>>>>>>> the link up, the switch MAC will detect the link status correctly.
>>>>>>>>
>>>>>>>> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>>>>>>>> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
>>>>>>> I thought we had issues with the 88E6390 where the PCS does not
>>>>>>> update the MAC with its results. Isn't this going to break the
>>>>>>> 6390? Andrew?
>>>>>>>     
>>>>>> Russell, I tested this patch on Turris MOX with 6390 on port 9 (cpu
>>>>>> port) which is configured in devicetree as 2500base-x, in-band-status,
>>>>>> and it works...
>>>>>>
>>>>>> Or will this break on user ports?
>>>>> User ports is what needs testing, ideally with an SFP.
>>>>>
>>>>> There used to be explicit code which when the SERDES reported link up,
>>>>> the MAC was configured in software with the correct speed etc. With
>>>>> the move to pcs APIs, it is less obvious how this works now, does it
>>>>> still software configure the MAC, or do we have the right magic so
>>>>> that the hardware updates itself.
>>>> It's still there. The speed/duplex etc are read from the serdes PHY
>>>> via mv88e6390_serdes_pcs_get_state(). When the link comes up, we
>>>> pass the negotiated link parameters read from there to the link_up()
>>>> functions. For ports where mv88e6xxx_port_ppu_updates() returns false
>>>> (no external PHY) we update the port's speed and duplex setting and
>>>> (currently, before this patch) force the link up.
>>>>
>>>> That was the behaviour before I converted the code, the one that you
>>>> referred to. I had assumed the code was correct, and _none_ of the
>>>> speed, duplex, nor link state was propagated from the serdes PCS to
>>>> the port on the 88E6390 - hence why the code you refer to existed.
>>>>
>>> Russell, you are right.
>>> SFP on 88E6390 does not work with this patch applied.
>>> So this patch breaks 88E6390.
>> Thanks for testing. It sounds like maybe if I make
>> mv88e6xxx_port_ppu_updates() return true for the 6097 in serdes mode I
>> can avoid the forced link up without affecting the 6390.
> Another option would be to make mv88e6xxx_mac_link_up() call a
> switch specific implementation function, which is probably way
> cleaner than introducing conditionals on the switch type in
> functions, and reflects the existing code structure.

I've spent most of the day plumbing in the serdes interrupts. And while 
I have that working I think even with interrupts I still have the 
problem that on the 88E6097 and similar there is no separation of PCS 
from the MAC so I'd have to do something like this anyway.

So I'll probably look at making the body of mv88e6xxx_mac_link_up a 
switch specific function.