[PATCH v2 5/6] dt-bindings: spi: Add compatible for Intel LGM SoC

From: Ramuthevar,Vadivel MuruganX
Date: Tue Oct 20 2020 - 22:37:07 EST


From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>

Add compatible string for Intel LGM SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/spi/cadence-quadspi.yaml | 68 +++++++++++-----------
1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
index 6ed8122a1326..57be1a730e7b 100644
--- a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
@@ -14,65 +14,61 @@ allOf:

properties:
compatible:
- items:
- - const: cdns,qspi-nor
- - const: ti,k2g-qspi, cdns,qspi-nor
- - const: ti,am654-ospi, cdns,qspi-nor
-
- description:
- Should be one of the above supported compatible strings.
- optional properties
- "cdns,is-decoded-cs" - Flag to indicate whether decoder is used or not.
- "cdns,rclk-en" - Flag to indicate that QSPI return clock is used to latch
- the read data rather than the QSPI clock. Make sure that QSPI return
- clock is populated on the board before using this property.
+ oneOf:
+ - items:
+ - const: cdns,qspi-nor
+ - const: ti,k2g-qspi, cdns,qspi-nor
+ - const: ti,am654-ospi, cdns,qspi-nor

reg:
- maxItems: 2
-
- description:
- Contains two entries, each of which is a tuple consisting of a
- physical address and length. The first entry is the address and
- length of the controller register set. The second entry is the
- address and length of the QSPI Controller data area.
+ items:
+ - description: the controller register set
+ - description: the controller data area

interrupts:
maxItems: 1
- description:
- Unit interrupt specifier for the controller interrupt.

clocks:
maxItems: 1
- description:
- phandle to the Quad SPI clock.

cdns,fifo-depth:
description:
Size of the data FIFO in words.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum: [ 128, 256 ]
- - default: 128
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [ 128, 256 ]
+ default: 128

cdns,fifo-width:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Bus width of the data FIFO in bytes.
- multipleOf: 4
+ default: 4

cdns,trigger-address:
$ref: /schemas/types.yaml#/definitions/uint32
description:
32-bit indirect AHB trigger address.

+ cdns,is-decoded-cs:
+ type: boolean
+ description:
+ Flag to indicate whether decoder is used or not.
+
+ cdns,rclk-en:
+ type: boolean
+ description:
+ Flag to indicate that QSPI return clock is used to latch the read
+ data rather than the QSPI clock. Make sure that QSPI return clock
+ is populated on the board before using this property.
+
resets:
- description:
- Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
+ maxItems : 2

reset-names:
- description:
- Must include either "qspi" and/or "qspi-ocp".
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ qspi, qspi-ocp ]

# subnode's properties
patternProperties:
@@ -114,13 +110,17 @@ required:
- cdns,fifo-depth
- cdns,fifo-width
- cdns,trigger-address
+ - cdns,is-decoded-cs
+ - cdns,rclk-en
- resets
- reset-names

+additionalProperties: false
+
examples:
- |
qspi: spi@ff705000 {
- compatible = "cadence,qspi";
+ compatible = "cadence,qspi","cdns,qpsi-nor";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xff705000 0x1000>,
--
2.11.0