Re: [RFC][PATCH] usb: dwc3: Add quirk to trigger a GCTL soft reset for Hisilicon Kirin Soc Platform

[John Stultz]

On Wed, Oct 21, 2020 at 12:14 PM Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> wrote:
>
> John Stultz wrote:
> > From: Yu Chen <chenyu56@xxxxxxxxxx>
> >
> > With the current dwc3 code on the HiKey960 we often see the
> > COREIDLE flag get stuck off in __dwc3_gadget_start(), which
> > seems to prevent the reset irq and causes the USB gadget to
> > fail to initialize.
> >
> > We had seen occasional initialization failures with older
> > kernels but with recent 5.x era kernels it seemed to be becoming
> > much more common, so I dug back through some older trees and
> > realized I dropped this quirk from Yu Chen during upstreaming
> > as I couldn't provide a proper rational for it and it didn't
> > seem to be necessary. I now realize I was wrong.
> >
> > On the upside, I can now understand more why such a quirk is
> > needed.
>
> This shouldn't be a quirk. It's part of the programming guide when
> switching mode in DRD. I don't know how we missed this.

Ah! That's great, as it should simplify the patch a bit and avoid
introducing another dt bindings!


> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index bdf0925da6b6..b138c67e3892 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -114,6 +114,19 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
> >       dwc->current_dr_role = mode;
> >  }
> >
> > +static void dwc3_gctl_core_soft_reset(struct dwc3 *dwc)
> > +{
> > +     int reg;
> > +
> > +     reg = dwc3_readl(dwc->regs, DWC3_GCTL);
> > +     reg |= (DWC3_GCTL_CORESOFTRESET);
> > +     dwc3_writel(dwc->regs, DWC3_GCTL, reg);
> > +
> > +     reg = dwc3_readl(dwc->regs, DWC3_GCTL);
> > +     reg &= ~(DWC3_GCTL_CORESOFTRESET);
> > +     dwc3_writel(dwc->regs, DWC3_GCTL, reg);
> > +}
> > +
> >  static void __dwc3_set_mode(struct work_struct *work)
> >  {
> >       struct dwc3 *dwc = work_to_dwc(work);
> > @@ -178,6 +191,10 @@ static void __dwc3_set_mode(struct work_struct *work)
> >               }
> >               break;
> >       case DWC3_GCTL_PRTCAP_DEVICE:
> > +             /* Execute a GCTL Core Soft Reset when switch mode */
> > +             if (dwc->gctl_reset_quirk)
> > +                     dwc3_gctl_core_soft_reset(dwc);
> > +
>
> This should be done before dwc3_set_prtcap(), and this applies when
> switching from device to host mode also. Make sure to check if the
> controller is DRD before doing this.

Sorry, by checking that the controller is DRD, I'm not sure exactly
what you mean.
Checking DWC3_GHWPARAMS0_MODE_DRD?  Or something else?

Thanks so much for the review and feedback!
-john