Re: [PATCH 4/4] clk: renesas: r8a774c0: Add RPC clocks

[Geert Uytterhoeven]

Hi Prabhakar,

On Fri, Oct 16, 2020 at 2:17 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
> as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR
> driver.
>
> Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/drivers/clk/renesas/r8a774c0-cpg-mssr.c
> +++ b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
> @@ -73,6 +74,12 @@ static const struct cpg_core_clk r8a774c0_core_clks[] __initconst = {
>         DEF_FIXED(".s2",       CLK_S2,             CLK_PLL1,       4, 1),
>         DEF_FIXED(".s3",       CLK_S3,             CLK_PLL1,       6, 1),
>         DEF_FIXED(".sdsrc",    CLK_SDSRC,          CLK_PLL1,       2, 1),
> +       DEF_BASE(".rpcsrc",    CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
> +
> +       DEF_BASE("rpc",        R8A774C0_CLK_RPC, CLK_TYPE_GEN3_RPC,
> +                CLK_RPCSRC),
> +       DEF_BASE("rpcd2",      R8A774C0_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
> +                R8A774C0_CLK_RPC),
>
>         DEF_DIV6_RO(".r",      CLK_RINT,           CLK_EXTAL, CPG_RCKCR, 32),
>

> @@ -275,6 +283,10 @@ static int __init r8a774c0_cpg_mssr_init(struct device *dev)
>         return rcar_gen3_cpg_init(cpg_pll_config, 0, cpg_mode);
>  }
>
> +static const struct clk_div_table cpg_rpcsrc_div_table[] = {
> +       { 0, 5 }, { 1, 3 }, { 2, 8 }, {3, 2}, {0, 0},
> +};

The above models RPCSRC as a clock generated by dividing PLL1 by either
5, 3, 8, or 2.  This does not match the hardware user's manual, which
states that RPCSRC is either PLL1 divided by 5 or 3, or PLL0 divided by
8 or 2.

I think you need a new clock type (CLK_TYPE_GEN3E_RPCSRC, as it applies
to RZ/G2E, and R-Car E3?), which registers a composite clock consisting
of a mux and divider.  This is a bit similar to the RPC/RPCD2 clocks,
which are composite clocks consisting of a divider and a gate.

Note that R-Car D3 is similar, except that PLL0 is divided by 5 or 2, which
means yet another clock type (and div_table).

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds