[PATCH v2 1/7] media: camss: ispif: Correctly reset based on the VFE ID

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>

Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
for dual-camera or simply because a secondary camera is connected
to it: in this case the reset will always happen on the VFE0 ctx
of the ISPIF, which is .. useless.

Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
where to do the (or what to) reset based on the VFE line id.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
 .../media/platform/qcom/camss/camss-ispif.c   | 85 ++++++++++++-------
 .../media/platform/qcom/camss/camss-ispif.h   |  2 +-
 2 files changed, 56 insertions(+), 31 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
index db94cfd6c508..754f0d044c38 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -26,6 +26,7 @@
 #define MSM_ISPIF_NAME "msm_ispif"
 
 #define ISPIF_RST_CMD_0			0x008
+#define ISPIF_RST_CMD_1			0x00c
 #define ISPIF_RST_CMD_0_STROBED_RST_EN		(1 << 0)
 #define ISPIF_RST_CMD_0_MISC_LOGIC_RST		(1 << 1)
 #define ISPIF_RST_CMD_0_SW_REG_RST		(1 << 2)
@@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
 	writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
 
 	if ((value0 >> 27) & 0x1)
-		complete(&ispif->reset_complete);
+		complete(&ispif->reset_complete[0]);
+
+	if ((value3 >> 27) & 0x1)
+		complete(&ispif->reset_complete[1]);
 
 	if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
 		dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
@@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
 	writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
 
 	if ((value0 >> 27) & 0x1)
-		complete(&ispif->reset_complete);
+		complete(&ispif->reset_complete[0]);
 
 	if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
 		dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
@@ -257,33 +261,18 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-/*
- * ispif_reset - Trigger reset on ISPIF module and wait to complete
- * @ispif: ISPIF device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int ispif_reset(struct ispif_device *ispif)
+static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
 {
 	unsigned long time;
 	u32 val;
-	int ret;
-
-	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
-	if (ret < 0)
-		return ret;
 
-	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
-	if (ret < 0)
-		return ret;
-
-	ret = camss_enable_clocks(ispif->nclocks_for_reset,
-				  ispif->clock_for_reset,
-				  to_device(ispif));
-	if (ret < 0)
-		return ret;
+	if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
+		dev_err(to_device(ispif),
+			"Error: asked reset for invalid VFE%d\n", vfe_id);
+		return -ENOENT;
+	}
 
-	reinit_completion(&ispif->reset_complete);
+	reinit_completion(&ispif->reset_complete[vfe_id]);
 
 	val = ISPIF_RST_CMD_0_STROBED_RST_EN |
 		ISPIF_RST_CMD_0_MISC_LOGIC_RST |
@@ -303,15 +292,50 @@ static int ispif_reset(struct ispif_device *ispif)
 		ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
 		ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
 
-	writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
+	if (vfe_id == 1)
+		writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1);
+	else
+		writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
 
-	time = wait_for_completion_timeout(&ispif->reset_complete,
+	time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
 		msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
 	if (!time) {
-		dev_err(to_device(ispif), "ISPIF reset timeout\n");
-		ret = -EIO;
+		dev_err(to_device(ispif),
+			"ISPIF for VFE%d reset timeout\n", vfe_id);
+		return -EIO;
 	}
 
+	return 0;
+}
+
+/*
+ * ispif_reset - Trigger reset on ISPIF module and wait to complete
+ * @ispif: ISPIF device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
+{
+	int ret;
+
+	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
+	if (ret < 0)
+		return ret;
+
+	ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
+	if (ret < 0)
+		return ret;
+
+	ret = camss_enable_clocks(ispif->nclocks_for_reset,
+				  ispif->clock_for_reset,
+				  to_device(ispif));
+	if (ret < 0)
+		return ret;
+
+	ret = ispif_vfe_reset(ispif, vfe_id);
+	if (ret)
+		dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
+
 	camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
 
 	camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
@@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
 			goto exit;
 		}
 
-		ret = ispif_reset(ispif);
+		ret = ispif_reset(ispif, line->vfe_id);
 		if (ret < 0) {
 			pm_runtime_put_sync(dev);
 			camss_disable_clocks(ispif->nclocks, ispif->clock);
@@ -1192,7 +1216,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
 
 	mutex_init(&ispif->config_lock);
 
-	init_completion(&ispif->reset_complete);
+	for (i = 0; i < MSM_ISPIF_VFE_NUM; i++)
+		init_completion(&ispif->reset_complete[i]);
 
 	return 0;
 }
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h
index 1a5ba2425a42..4132174f7ea1 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.h
+++ b/drivers/media/platform/qcom/camss/camss-ispif.h
@@ -56,7 +56,7 @@ struct ispif_device {
 	int nclocks;
 	struct camss_clock  *clock_for_reset;
 	int nclocks_for_reset;
-	struct completion reset_complete;
+	struct completion reset_complete[MSM_ISPIF_VFE_NUM];
 	int power_count;
 	struct mutex power_lock;
 	struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
-- 
2.28.0