Re: [RFC PATCH v1 0/6] add initial CAN PHY support

[Marc Kleine-Budde]

On 10/23/20 1:45 PM, Russell King - ARM Linux admin wrote:
> On Fri, Oct 23, 2020 at 12:56:20PM +0200, Oleksij Rempel wrote:
>> - The upcoming CAN SIC and CAN SIC XL PHYs use a different interface to
>>   the CAN controller. This means the controller needs to know which type
>>   of PHY is attached to configure the interface in the correct mode. Use
>>   PHY link for that, too.
> 
> Is this dynamic in some form?

There isn't any CAN SIC transceivers out there yet. I suspect there will be no
auto detection possible, so we would describe the type of the attached
transceiver via device tree.

In the future I can think of some devices that have a MUX and use the a classic
transceiver (CAN high-speed) for legacy deployments and CAN SIC transceivers if
connected to a "modern" CAN bus.

Someone (i.e. the user or the system integrator) has to configure the MUX to
select the correct transceiver.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Attachment: signature.asc
Description: OpenPGP digital signature