[PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data

[Tony Lindgren]

We need to enable no-reset-on-init quirk for GPMC if the config
option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC
driver code is unable to show the bootloader configured timings.

Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 drivers/bus/ti-sysc.c                 | 10 ++++++++++
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1382,6 +1382,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("gpmc", 0, 0, 0x10, 0x14, 0x00000060, 0xffffffff,
+		   SYSC_QUIRK_GPMC_DEBUG),
 	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff,
 		   SYSC_QUIRK_OPT_CLKS_NEEDED),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
@@ -1815,6 +1817,14 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+#ifdef CONFIG_OMAP_GPMC_DEBUG
+	if (ddata->cfg.quirks & SYSC_QUIRK_GPMC_DEBUG) {
+		ddata->cfg.quirks |= SYSC_QUIRK_NO_RESET_ON_INIT;
+
+		return;
+	}
+#endif
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_I2C) {
 		ddata->pre_reset_quirk = sysc_pre_reset_quirk_i2c;
 		ddata->post_reset_quirk = sysc_post_reset_quirk_i2c;
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -50,6 +50,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_GPMC_DEBUG		BIT(26)
 #define SYSC_MODULE_QUIRK_ENA_RESETDONE	BIT(25)
 #define SYSC_MODULE_QUIRK_PRUSS		BIT(24)
 #define SYSC_MODULE_QUIRK_DSS_RESET	BIT(23)
-- 
2.29.1