Re: [PATCH v2] media: staging: rkisp1: cap: refactor enable/disable stream to allow multistreaming

[Dafna Hirschfeld]

Hi,


Am 19.10.20 um 18:04 schrieb Helen Koike:
> Allow streaming from self picture path and main picture path at the same
> time.
>
> Take care for s_stream() callbacks to not be called twice.
> When starting a stream, s_stream(true) shouldn't be called for the isp
> and the sensor if the other stream is already enabled (since it was
> already called).
> When stopping a stream, s_stream(false) shouldn't be called for isp and
> the sensor if the other stream is still enabled.
>
> Remove the callback function scheme for navigating through the topology,
> simplifying the code, improving readability.
>
> Remove multistreaming item from the TODO list.
>
> Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx>
> ---
>
> Hello,
>
> Since we didn't reach an agreement on the helpers in the core[1], I'm
> sending this patch to fix this limitation only for rkisp1.
>
> [1] https://patchwork.linuxtv.org/project/linux-media/cover/20200415013044.1778572-1-helen.koike@xxxxxxxxxxxxx/
>
> If we decide to add the helpers in the future, we can clean up drivers
> even more, but I don't want to block this feature.
>
> This Patch depends on patch:
> "media: staging: rkisp1: validate links before powering and streaming"
> https://patchwork.linuxtv.org/project/linux-media/patch/20201002184222.7094-2-dafna.hirschfeld@xxxxxxxxxxxxx/
>
> Changes in V2:
> ==============
> - Rebase on top of patch
> "media: staging: rkisp1: validate links before powering and streaming"
> which fixes media_pipeline_{start,stop}() calling order.
> - Fix commit message
> - Fix disable order
> - Disable capture when s_stream(true) of the resizer fails
>
> Overview of the patch:
> ======================
>
> * Rename rkisp1_stream_{start,stop}() to
>    rkisp1_cap_stream_{enable,disable}() to clarify the difference between
>    other stream enable/disable functions
>
> * Implement rkisp1_pipeline_stream_{enable,disable}() to replace
>    rkisp1_pipeline_{enable,disable}_cb() and rkisp1_pipeline_sink_walk(),
>    which were removed.
>
> * Call rkisp1_cap_stream_{enable,disable}() from
>    rkisp1_pipeline_stream_{enable,disable}() for better
>    unwind handling and function name semantics.
>
> * Remove item from TODO list (I also reviewed the use of the
>    is_streaming var in the code and lgtm).
>
> This patch was tested on rockpi4 board with:
> ============================================
>
> "media-ctl" "-d" "platform:rkisp1" "-r"
> "media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]"
> "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]"
> "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [1]"
>
> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]'
>
> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]'
> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]'
>
> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 [fmt:YUYV8_2X8/900x800]'
>
> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "width=900,height=800,"
> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "pixelformat=422P"
>
> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_mainpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_mainpath":1 [fmt:YUYV8_2X8/900x800]'
>
> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "-v" "width=900,height=800,"
> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "-v" "pixelformat=422P"
>
> sleep 1
>
> time v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "--stream-mmap" "--stream-count" "100" &
> time v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" "--stream-count" "100" &
>
> wait
> echo "Completed"
>
> Thanks
> Helen
> ---
>   drivers/staging/media/rkisp1/TODO             |   3 -
>   drivers/staging/media/rkisp1/rkisp1-capture.c | 219 +++++++++---------
>   2 files changed, 110 insertions(+), 112 deletions(-)
>
> diff --git a/drivers/staging/media/rkisp1/TODO b/drivers/staging/media/rkisp1/TODO
> index e7c8398fc2cef..a2dd0ad951c25 100644
> --- a/drivers/staging/media/rkisp1/TODO
> +++ b/drivers/staging/media/rkisp1/TODO
> @@ -1,9 +1,6 @@
>   * Fix pad format size for statistics and parameters entities.
>   * Fix checkpatch errors.
>   * Add uapi docs. Remember to add documentation of how quantization is handled.
> -* streaming paths (mainpath and selfpath) check if the other path is streaming
> -in several places of the code, review this, specially that it doesn't seem it
> -supports streaming from both paths at the same time.
>   
>   NOTES:
>   * All v4l2-compliance test must pass.
> diff --git a/drivers/staging/media/rkisp1/rkisp1-capture.c b/drivers/staging/media/rkisp1/rkisp1-capture.c
> index 9b4a12e13f135..13463c899b009 100644
> --- a/drivers/staging/media/rkisp1/rkisp1-capture.c
> +++ b/drivers/staging/media/rkisp1/rkisp1-capture.c
> @@ -830,71 +830,43 @@ static void rkisp1_return_all_buffers(struct rkisp1_capture *cap,
>   }
>   
>   /*
> - * rkisp1_pipeline_sink_walk - Walk through the pipeline and call cb
> - * @from: entity at which to start pipeline walk
> - * @until: entity at which to stop pipeline walk
> - *
> - * Walk the entities chain starting at the pipeline video node and stop
> - * all subdevices in the chain.
> - *
> - * If the until argument isn't NULL, stop the pipeline walk when reaching the
> - * until entity. This is used to disable a partially started pipeline due to a
> - * subdev start error.
> + * Most of registers inside rockchip ISP1 have shadow register since
> + * they must be not be changed during processing a frame.
> + * Usually, each sub-module updates its shadow register after
> + * processing the last pixel of a frame.
>    */
> -static int rkisp1_pipeline_sink_walk(struct media_entity *from,
> -				     struct media_entity *until,
> -				     int (*cb)(struct media_entity *from,
> -					       struct media_entity *curr))
> +static void rkisp1_cap_stream_enable(struct rkisp1_capture *cap)
>   {
> -	struct media_entity *entity = from;
> -	struct media_pad *pad;
> -	unsigned int i;
> -	int ret;
> -
> -	while (1) {
> -		pad = NULL;
> -		/* Find remote source pad */
> -		for (i = 0; i < entity->num_pads; i++) {
> -			struct media_pad *spad = &entity->pads[i];
> -
> -			if (!(spad->flags & MEDIA_PAD_FL_SINK))
> -				continue;
> -			pad = media_entity_remote_pad(spad);
> -			if (pad && is_media_entity_v4l2_subdev(pad->entity))
> -				break;
> -		}
> -		if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> -			break;
> +	struct rkisp1_device *rkisp1 = cap->rkisp1;
> +	struct rkisp1_capture *other = &rkisp1->capture_devs[cap->id ^ 1];
>   
> -		entity = pad->entity;
> -		if (entity == until)
> -			break;
> +	cap->ops->set_data_path(cap);
> +	cap->ops->config(cap);
>   
> -		ret = cb(from, entity);
> -		if (ret)
> -			return ret;
> +	/* Setup a buffer for the next frame */
> +	spin_lock_irq(&cap->buf.lock);
> +	rkisp1_set_next_buf(cap);
> +	cap->ops->enable(cap);
> +	/* It's safe to config ACTIVE and SHADOW regs for the
> +	 * first stream. While when the second is starting, do NOT
> +	 * force update because it also update the first one.
> +	 *
> +	 * The latter case would drop one more buf(that is 2) since
> +	 * there's not buf in shadow when the second FE received. This's
> +	 * also required because the second FE maybe corrupt especially
> +	 * when run at 120fps.
> +	 */
> +	if (!other->is_streaming) {
> +		/* force cfg update */
> +		rkisp1_write(rkisp1,
> +			     RKISP1_CIF_MI_INIT_SOFT_UPD, RKISP1_CIF_MI_INIT);
> +		rkisp1_set_next_buf(cap);
>   	}
> -
> -	return 0;
> -}
> -
> -static int rkisp1_pipeline_disable_cb(struct media_entity *from,
> -				      struct media_entity *curr)
> -{
> -	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
> -
> -	return v4l2_subdev_call(sd, video, s_stream, false);
> -}
> -
> -static int rkisp1_pipeline_enable_cb(struct media_entity *from,
> -				     struct media_entity *curr)
> -{
> -	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
> -
> -	return v4l2_subdev_call(sd, video, s_stream, true);
> +	spin_unlock_irq(&cap->buf.lock);
> +	cap->is_streaming = true;
>   }
>   
> -static void rkisp1_stream_stop(struct rkisp1_capture *cap)
> +static void rkisp1_cap_stream_disable(struct rkisp1_capture *cap)
>   {
>   	int ret;
>   
> @@ -911,6 +883,82 @@ static void rkisp1_stream_stop(struct rkisp1_capture *cap)
>   	}
>   }
>   
> +/*
> + * rkisp1_pipeline_stream_disable - disable nodes in the pipeline
> + *
> + * Call s_stream(false) in the reverse order from
> + * rkisp1_pipeline_stream_enable() and disable the DMA engine.
> + * Should be called before media_pipeline_stop()
> + */
> +static void rkisp1_pipeline_stream_disable(struct rkisp1_capture *cap)
> +	__must_hold(&cap->rkisp1->stream_lock)
> +{
> +	struct rkisp1_device *rkisp1 = cap->rkisp1;
> +
> +	/*
> +	 * If the other capture is streaming, isp and sensor nodes shouldn't
> +	 * be disabled, skip them.
> +	 */
> +	if (rkisp1->pipe.streaming_count < 2) {
> +		v4l2_subdev_call(rkisp1->active_sensor->sd, video, s_stream,
> +				 false);
> +		v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, false);
> +	}
> +
> +	v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video, s_stream,
> +			 false);
> +
> +	rkisp1_cap_stream_disable(cap);
> +}
> +
> +/*
> + * rkisp1_pipeline_stream_enable - enable nodes in the pipeline
> + *
> + * Enable the DMA Engine and call s_stream(true) through the pipeline.
> + * Should be called after media_pipeline_start()
> + */
> +static int rkisp1_pipeline_stream_enable(struct rkisp1_capture *cap)
> +	__must_hold(&cap->rkisp1->stream_lock)
> +{
> +	struct rkisp1_device *rkisp1 = cap->rkisp1;
> +	int ret;
> +
> +	rkisp1_cap_stream_enable(cap);
> +
> +	ret = v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video,
> +			       s_stream, true);
> +	if (ret)
> +		goto err_disable_cap;
> +
> +	/*
> +	 * If the other capture is streaming, isp and sensor nodes are already
> +	 * enabled, skip them.
> +	 */
> +	if (rkisp1->pipe.streaming_count > 1)
> +		return 0;
> +
> +	ret = v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, true);
> +	if (ret)
> +		goto err_disable_rsz;
> +
> +	ret = v4l2_subdev_call(rkisp1->active_sensor->sd, video, s_stream,
> +			       true);
> +	if (ret)
> +		goto err_disable_isp;
> +
> +	return 0;
> +
> +err_disable_isp:
> +	v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, false);
> +err_disable_rsz:
> +	v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video, s_stream,
> +			 false);
> +err_disable_cap:
> +	rkisp1_cap_stream_disable(cap);
> +
> +	return ret;
> +}
> +
>   static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>   {
>   	struct rkisp1_capture *cap = queue->drv_priv;
> @@ -920,12 +968,7 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>   
>   	mutex_lock(&cap->rkisp1->stream_lock);
>   
> -	rkisp1_stream_stop(cap);
> -	ret = rkisp1_pipeline_sink_walk(&node->vdev.entity, NULL,
> -					rkisp1_pipeline_disable_cb);
> -	if (ret)
> -		dev_err(rkisp1->dev,
> -			"pipeline stream-off failed error:%d\n", ret);
> +	rkisp1_pipeline_stream_disable(cap);
>   
>   	rkisp1_return_all_buffers(cap, VB2_BUF_STATE_ERROR);
>   
> @@ -941,43 +984,6 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>   	mutex_unlock(&cap->rkisp1->stream_lock);
>   }
>   
> -/*
> - * Most of registers inside rockchip ISP1 have shadow register since
> - * they must be not be changed during processing a frame.
> - * Usually, each sub-module updates its shadow register after
> - * processing the last pixel of a frame.
> - */
> -static void rkisp1_stream_start(struct rkisp1_capture *cap)
> -{
> -	struct rkisp1_device *rkisp1 = cap->rkisp1;
> -	struct rkisp1_capture *other = &rkisp1->capture_devs[cap->id ^ 1];
> -
> -	cap->ops->set_data_path(cap);
> -	cap->ops->config(cap);
> -
> -	/* Setup a buffer for the next frame */
> -	spin_lock_irq(&cap->buf.lock);
> -	rkisp1_set_next_buf(cap);
> -	cap->ops->enable(cap);
> -	/* It's safe to config ACTIVE and SHADOW regs for the
> -	 * first stream. While when the second is starting, do NOT
> -	 * force update because it also update the first one.
> -	 *
> -	 * The latter case would drop one more buf(that is 2) since
> -	 * there's not buf in shadow when the second FE received. This's
> -	 * also required because the second FE maybe corrupt especially
> -	 * when run at 120fps.
> -	 */
> -	if (!other->is_streaming) {
> -		/* force cfg update */
> -		rkisp1_write(rkisp1,
> -			     RKISP1_CIF_MI_INIT_SOFT_UPD, RKISP1_CIF_MI_INIT);
> -		rkisp1_set_next_buf(cap);
> -	}
> -	spin_unlock_irq(&cap->buf.lock);
> -	cap->is_streaming = true;
> -}
> -
>   static int
>   rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
>   {
> @@ -1008,20 +1014,15 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
>   		goto err_pipe_pm_put;
>   	}
>   
> -	rkisp1_stream_start(cap);
> -
> -	/* start sub-devices */
> -	ret = rkisp1_pipeline_sink_walk(entity, NULL,
> -					rkisp1_pipeline_enable_cb);

We should also make sure that the resizer is connected to the isp
and fail if not.
otherwise,

Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>

> +	ret = rkisp1_pipeline_stream_enable(cap);
>   	if (ret)
> -		goto err_stop_stream;
> +		goto err_v4l2_pm_put;
>   
>   	mutex_unlock(&cap->rkisp1->stream_lock);
>   
>   	return 0;
>   
> -err_stop_stream:
> -	rkisp1_stream_stop(cap);
> +err_v4l2_pm_put:
>   	v4l2_pipeline_pm_put(entity);
>   err_pipe_pm_put:
>   	pm_runtime_put(cap->rkisp1->dev);